Bearings - Thrust Ball - Flat - Chrome Steel

Bearings -> Thrust Ball -> Flat -> Chrome Steel

There are 9 products in the sub-categories of Bearings - Thrust Ball - Flat - Chrome Steel. Browse the Bearings - Thrust Ball - Flat - Chrome Steel products table.

Category Details

A selection of Chrome Steel Flat Thrust Ball Bearings. 3 Piece Thrust Bearings Open Type with Flat Washers

  • Thrust ball bearings provide for axial loads. They are designed to handle forces that push or pull along the axis of a rotating shaft
  • Commonly used in automotive, electric motors, marine propulsion, pumps and compressors, aerospace applications, industrial machinery, and wind turbines.
  • An expanded range may be available on special order. Please enquire.
  • These bearings are designed so that when one ring turns, the other remains stationary.
  • Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races.
  • Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate.
  • Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Small Parts & Bearings

Additional resources:


A more comprehensive listing may be found in the Bearings - Thrust Ball - Flat - Chrome Steel category on the MBA Minibearings main store.
Shaft Diameter (d1) OD (D1) Thickness (T) Bore (d2) OD (D2) Dynamic Load Capacity Indicative
Image
Thrust Ball Bearings - 2x6x3 mm / 2 mm Flat - Chrome Steel Bearing
Shaft Diameter (d1)
2.000
mm

(Equiv. 0.079 in.)
OD (D1)
6.000
mm

(Equiv. 0.236 in.)
Thickness (T)
3.000
mm

(Equiv. 0.118 in.)
Bore (d2)
2.000
mm
OD (D2)
6.000
mm
Dynamic Load Capacity
12
kgf
Thrust Ball Bearings - 2x6x3 mm / 2 mm Flat - Chrome Steel
Material: Chrome Steel    Cage Type: Brass   
Part Number: T-0020-0060-F-BR (Each)
12 Available Now | Further orders can be expected around Fri, Feb 13, 2026
$6.86 AUD
$6.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 12 available can be backordered.
Shaft Diameter (d1) OD (D1) Thickness (T) Bore (d2) Indicative
Image
Thrust Ball Bearings - 2x6x3 mm / 2 mm Flat - Chrome Steel Bearing
Shaft Diameter (d1)
2.000
mm

(Equiv. 0.079 in.)
OD (D1)
6.000
mm

(Equiv. 0.236 in.)
Thickness (T)
3.000
mm

(Equiv. 0.118 in.)
Bore (d2)
2.000
mm
Thrust Ball Bearings - 2x6x3 mm / 2 mm Flat - Chrome Steel
Material: Chrome Steel    OD (D2): 6.000 mm    Dynamic Load Capacity: 12 kgf    Cage Type: Brass   
Part Number: T-0020-0060-F-BR (Each)
12 Available Now | Further orders can be expected around Fri, Feb 13, 2026
$6.86 AUD
$6.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

12 Available Now. Backorder if more than 12.
Thrust Ball Bearings - 4x9x4 mm / 4 mm Flat - Chrome Steel Bearing
Shaft Diameter (d1)
4.000
mm

(Equiv. 0.157 in.)
OD (D1)
9.000
mm

(Equiv. 0.354 in.)
Thickness (T)
4.000
mm

(Equiv. 0.157 in.)
Bore (d2)
4.000
mm
OD (D2)
9.000
mm
Dynamic Load Capacity
17
kgf
Thrust Ball Bearings - 4x9x4 mm / 4 mm Flat - Chrome Steel
Material: Chrome Steel    Cage Type: Steel   
Deleted Item. Available while stocks last.
Part Number: T-0040-0090-F (Each)
3 Available Now | Item Discontinued - Up to 3 may be ordered online. No backorders. Please contact us if you need a larger quantity
$8.00 AUD
$9.60 AUD $8.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

3 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Thrust Ball Bearings - 4x9x4 mm / 4 mm Flat - Chrome Steel Bearing
Shaft Diameter (d1)
4.000
mm

(Equiv. 0.157 in.)
OD (D1)
9.000
mm

(Equiv. 0.354 in.)
Thickness (T)
4.000
mm

(Equiv. 0.157 in.)
Bore (d2)
4.000
mm
Thrust Ball Bearings - 4x9x4 mm / 4 mm Flat - Chrome Steel
Material: Chrome Steel    OD (D2): 9.000 mm    Dynamic Load Capacity: 17 kgf    Cage Type: Steel   
Deleted Item. Available while stocks last.
Part Number: T-0040-0090-F (Each)
3 Available Now | Item Discontinued - Up to 3 may be ordered online. No backorders. Please contact us if you need a larger quantity
$8.00 AUD
$9.60 AUD $8.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

3 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Thrust Ball Bearings - 7x15x5 mm / 7 mm Flat - Chrome Steel Bearing
Shaft Diameter (d1)
7.000
mm

(Equiv. 0.276 in.)
OD (D1)
15.000
mm

(Equiv. 0.591 in.)
Thickness (T)
5.000
mm

(Equiv. 0.197 in.)
Bore (d2)
7.000
mm
OD (D2)
15.000
mm
Dynamic Load Capacity
57
kgf
Thrust Ball Bearings - 7x15x5 mm / 7 mm Flat - Chrome Steel
Material: Chrome Steel    Cage Type: Steel   
Part Number: T-0070-0150-F-ST (PK-2)
31 units (62 pcs) Available Now | Further orders can be expected around Sun, Jan 25, 2026
$4.23 AUD
$4.23 AUD
Priced, Stocked and Sold Per 2 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 31 available can be backordered.
Thrust Ball Bearings - 7x15x5 mm / 7 mm Flat - Chrome Steel Bearing
Shaft Diameter (d1)
7.000
mm

(Equiv. 0.276 in.)
OD (D1)
15.000
mm

(Equiv. 0.591 in.)
Thickness (T)
5.000
mm

(Equiv. 0.197 in.)
Bore (d2)
7.000
mm
Thrust Ball Bearings - 7x15x5 mm / 7 mm Flat - Chrome Steel
Material: Chrome Steel    OD (D2): 15.000 mm    Dynamic Load Capacity: 57 kgf    Cage Type: Steel   
Part Number: T-0070-0150-F-ST (PK-2)
31 units (62 pcs) Available Now | Further orders can be expected around Sun, Jan 25, 2026
$4.23 AUD
$4.23 AUD
Priced, Stocked and Sold Per 2 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

31 units (62 pcs) Available Now. Backorder if more than 31.
Thrust Ball Bearings - 7x15x5 mm / 7 mm Flat - Chrome Steel Bearing
Shaft Diameter (d1)
7.000
mm

(Equiv. 0.276 in.)
OD (D1)
15.000
mm

(Equiv. 0.591 in.)
Thickness (T)
5.000
mm

(Equiv. 0.197 in.)
Bore (d2)
7.000
mm
OD (D2)
15.000
mm
Dynamic Load Capacity
57
kgf
Thrust Ball Bearings - 7x15x5 mm / 7 mm Flat - Chrome Steel
Material: Chrome Steel    Cage Type: Brass   
Part Number: T-0070-0150-F-BR (Each)
7 Available Now | Further orders can be expected around Fri, Feb 13, 2026
$6.59 AUD
$6.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 7 available can be backordered.
Thrust Ball Bearings - 7x15x5 mm / 7 mm Flat - Chrome Steel Bearing
Shaft Diameter (d1)
7.000
mm

(Equiv. 0.276 in.)
OD (D1)
15.000
mm

(Equiv. 0.591 in.)
Thickness (T)
5.000
mm

(Equiv. 0.197 in.)
Bore (d2)
7.000
mm
Thrust Ball Bearings - 7x15x5 mm / 7 mm Flat - Chrome Steel
Material: Chrome Steel    OD (D2): 15.000 mm    Dynamic Load Capacity: 57 kgf    Cage Type: Brass   
Part Number: T-0070-0150-F-BR (Each)
7 Available Now | Further orders can be expected around Fri, Feb 13, 2026
$6.59 AUD
$6.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

7 Available Now. Backorder if more than 7.
Thrust Ball Bearings - 9x17x5 mm / 9 mm Flat - Chrome Steel Bearing
Shaft Diameter (d1)
9.000
mm

(Equiv. 0.354 in.)
OD (D1)
17.000
mm

(Equiv. 0.669 in.)
Thickness (T)
5.000
mm

(Equiv. 0.197 in.)
Bore (d2)
9.000
mm
OD (D2)
17.000
mm
Dynamic Load Capacity
59
kgf
Thrust Ball Bearings - 9x17x5 mm / 9 mm Flat - Chrome Steel
Material: Chrome Steel    Cage Type: Brass   
Part Number: T-0090-0170-F-BR (Each)
44 Available Now | Further orders can be expected around Fri, Feb 13, 2026
$6.41 AUD
$6.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 44 available can be backordered.
Thrust Ball Bearings - 9x17x5 mm / 9 mm Flat - Chrome Steel Bearing
Shaft Diameter (d1)
9.000
mm

(Equiv. 0.354 in.)
OD (D1)
17.000
mm

(Equiv. 0.669 in.)
Thickness (T)
5.000
mm

(Equiv. 0.197 in.)
Bore (d2)
9.000
mm
Thrust Ball Bearings - 9x17x5 mm / 9 mm Flat - Chrome Steel
Material: Chrome Steel    OD (D2): 17.000 mm    Dynamic Load Capacity: 59 kgf    Cage Type: Brass   
Part Number: T-0090-0170-F-BR (Each)
44 Available Now | Further orders can be expected around Fri, Feb 13, 2026
$6.41 AUD
$6.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

44 Available Now. Backorder if more than 44.
Thrust Ball Bearings - 9.525x20.638x6.35 mm / 9.525 mm Flat - Chrome Steel Bearing
Shaft Diameter (d1)
9.525
mm
+ 0.076 / + 0.203
(Equiv. 0.375 in.)
OD (D1)
20.638
mm
- 0.013 / - 0.208
(Equiv. 0.813 in.)
Thickness (T)
6.350
mm
+ 0.076 / - 0.127
(Equiv. 0.25 in.)
Bore (d2)
9.525
mm
- 0.025 / - 0.202
OD (D2)
20.638
mm
- 0.025 / - 0.202
Dynamic Load Capacity
35
kgf
Thrust Ball Bearings - 9.525x20.638x6.35 mm / 9.525 mm Flat - Chrome Steel
Material: Chrome Steel    Cage Type: Moulded Nylon   
Part Number: T-0095-0204-F-NY (Each)
4 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$6.14 AUD
$10.94 AUD $6.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 4 available can be backordered.
Thrust Ball Bearings - 9.525x20.638x6.35 mm / 9.525 mm Flat - Chrome Steel Bearing
Shaft Diameter (d1)
9.525
mm
+ 0.076 / + 0.203
(Equiv. 0.375 in.)
OD (D1)
20.638
mm
- 0.013 / - 0.208
(Equiv. 0.813 in.)
Thickness (T)
6.350
mm
+ 0.076 / - 0.127
(Equiv. 0.25 in.)
Bore (d2)
9.525
mm
- 0.025 / - 0.202
Thrust Ball Bearings - 9.525x20.638x6.35 mm / 9.525 mm Flat - Chrome Steel
Material: Chrome Steel    OD (D2): 20.638 mm - 0.025 / - 0.202    Dynamic Load Capacity: 35 kgf    Cage Type: Moulded Nylon   
Part Number: T-0095-0204-F-NY (Each)
4 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$6.14 AUD
$10.94 AUD $6.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

4 Available Now. Backorder if more than 4.
Thrust Ball Bearings - 11.112x22.225x6.35 mm / 11.113 mm Flat - Chrome Steel Bearing
Shaft Diameter (d1)
11.112
mm
+ 0.088 / + 0.215
(Equiv. 0.437 in.)
OD (D1)
22.225
mm
- 0.013 / - 0.208
(Equiv. 0.875 in.)
Thickness (T)
6.350
mm
+ 0.076 / - 0.127
(Equiv. 0.25 in.)
Bore (d2)
11.113
mm
- 0.025 / - 0.202
OD (D2)
22.225
mm
- 0.025 / - 0.202
Dynamic Load Capacity
41
kgf
Thrust Ball Bearings - 11.112x22.225x6.35 mm / 11.113 mm Flat - Chrome Steel
Material: Chrome Steel    Cage Type: Moulded Nylon   
Part Number: T-0111-0220-F-NY (Each)
3 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$6.59 AUD
$11.72 AUD $6.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 3 available can be backordered.
Thrust Ball Bearings - 11.112x22.225x6.35 mm / 11.113 mm Flat - Chrome Steel Bearing
Shaft Diameter (d1)
11.112
mm
+ 0.088 / + 0.215
(Equiv. 0.437 in.)
OD (D1)
22.225
mm
- 0.013 / - 0.208
(Equiv. 0.875 in.)
Thickness (T)
6.350
mm
+ 0.076 / - 0.127
(Equiv. 0.25 in.)
Bore (d2)
11.113
mm
- 0.025 / - 0.202
Thrust Ball Bearings - 11.112x22.225x6.35 mm / 11.113 mm Flat - Chrome Steel
Material: Chrome Steel    OD (D2): 22.225 mm - 0.025 / - 0.202    Dynamic Load Capacity: 41 kgf    Cage Type: Moulded Nylon   
Part Number: T-0111-0220-F-NY (Each)
3 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$6.59 AUD
$11.72 AUD $6.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

3 Available Now. Backorder if more than 3.
Thrust Ball Bearings - 12.7x23.813x6.35 mm / 12.7 mm Flat - Chrome Steel Bearing
Shaft Diameter (d1)
12.700
mm
+ 0.076 / + 0.203
(Equiv. 0.5 in.)
OD (D1)
23.813
mm
- 0.013 / - 0.208
(Equiv. 0.938 in.)
Thickness (T)
6.350
mm
+ 0.076 / - 0.127
(Equiv. 0.25 in.)
Bore (d2)
12.700
mm
- 0.025 / - 0.202
OD (D2)
23.813
mm
- 0.025 / - 0.202
Dynamic Load Capacity
47
kgf
Thrust Ball Bearings - 12.7x23.813x6.35 mm / 12.7 mm Flat - Chrome Steel
Material: Chrome Steel    Cage Type: Moulded Nylon   
Part Number: T-0127-0236-F-NY (Each)
1 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$9.68 AUD
$9.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 1 available can be backordered.
Thrust Ball Bearings - 12.7x23.813x6.35 mm / 12.7 mm Flat - Chrome Steel Bearing
Shaft Diameter (d1)
12.700
mm
+ 0.076 / + 0.203
(Equiv. 0.5 in.)
OD (D1)
23.813
mm
- 0.013 / - 0.208
(Equiv. 0.938 in.)
Thickness (T)
6.350
mm
+ 0.076 / - 0.127
(Equiv. 0.25 in.)
Bore (d2)
12.700
mm
- 0.025 / - 0.202
Thrust Ball Bearings - 12.7x23.813x6.35 mm / 12.7 mm Flat - Chrome Steel
Material: Chrome Steel    OD (D2): 23.813 mm - 0.025 / - 0.202    Dynamic Load Capacity: 47 kgf    Cage Type: Moulded Nylon   
Part Number: T-0127-0236-F-NY (Each)
1 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$9.68 AUD
$9.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. Backorder if more than 1.
Thrust Ball Bearings - 14.288x25.4x6.35 mm / 14.288 mm Flat - Chrome Steel Bearing
Shaft Diameter (d1)
14.288
mm
+ 0.089 / + 0.216
(Equiv. 0.563 in.)
OD (D1)
25.400
mm
- 0.013 / - 0.208
(Equiv. 1 in.)
Thickness (T)
6.350
mm
+ 0.076 / - 0.127
(Equiv. 0.25 in.)
Bore (d2)
14.288
mm
- 0.025 / - 0.202
OD (D2)
25.400
mm
- 0.025 / - 0.202
Dynamic Load Capacity
53
kgf
Thrust Ball Bearings - 14.288x25.4x6.35 mm / 14.288 mm Flat - Chrome Steel
Material: Chrome Steel    Cage Type: Moulded Nylon   
Part Number: T-0143-0252-F-NY (Each)
2 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$11.23 AUD
$20.40 AUD $11.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 2 available can be backordered.
Thrust Ball Bearings - 14.288x25.4x6.35 mm / 14.288 mm Flat - Chrome Steel Bearing
Shaft Diameter (d1)
14.288
mm
+ 0.089 / + 0.216
(Equiv. 0.563 in.)
OD (D1)
25.400
mm
- 0.013 / - 0.208
(Equiv. 1 in.)
Thickness (T)
6.350
mm
+ 0.076 / - 0.127
(Equiv. 0.25 in.)
Bore (d2)
14.288
mm
- 0.025 / - 0.202
Thrust Ball Bearings - 14.288x25.4x6.35 mm / 14.288 mm Flat - Chrome Steel
Material: Chrome Steel    OD (D2): 25.400 mm - 0.025 / - 0.202    Dynamic Load Capacity: 53 kgf    Cage Type: Moulded Nylon   
Part Number: T-0143-0252-F-NY (Each)
2 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$11.23 AUD
$20.40 AUD $11.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.