Washers - Self Aligning - Sets

Washers -> Self Aligning -> Sets

There are 9 products in the sub-categories of Washers - Self Aligning - Sets. Browse the Washers - Self Aligning - Sets products table. To narrow down the selection, please choose a sub-category from the links below.

Self Aligning Washers - 6.35x7.137x15.88 mm - Carbon Steel Hardened

Washers - Self Aligning - Sets - Hardened Steel

A selection of Hardened Steel Sets Self Aligning Washers. Complete set, containing...

Washers - Self Aligning - Sets - Hardened Steel

Self Aligning Washers - 5x7x15 mm Sets

Washers - Self Aligning - Sets - Plastic

A selection of Plastic Sets Self Aligning Washers. Complete set, containing both...

Washers - Self Aligning - Sets - Plastic

Self Aligning Washers - 12.7x13.494x28.58 mm - Stainless Steel

Washers - Self Aligning - Sets - Stainless Steel

A selection of Stainless Steel Sets Self Aligning Washers. Complete set, containing...

Washers - Self Aligning - Sets - Stainless Steel

Category Details

This category includes various types of self aligning washers.
  • Self-aligning washers are designed to compensate for misalignment between connected parts. An expanded range may be available on special order. Please enquire.
  • Consists of a convex and concave washer that swivel slightly when nested, allowing them to adapt to slight angles and uneven surfaces. This helps to distribute load evenly and reduce stress on the connection.

Small Parts & Bearings

Additional resources:


A more comprehensive listing may be found in the Washers - Self Aligning - Sets category on the MBA Minibearings main store.
Nominal Inside Diameter (B) Housing Pad Bore (d3) OD (d2) Ball socket (h1) Spherical Disk (h2) Overall Height (H) Indicative
Image
Self Aligning Washers - 5x7x15 mm Sets - Carbon Spring Steel Self Finish Washer
Nominal Inside Diameter (B)
5.00
mm
+ 0.20 / - 0.00
(Equiv. 0.197 in.)
Housing Pad Bore (d3)
7.00
mm

(Equiv. 0.276 in.)
OD (d2)
15.00
mm

(Equiv. 0.591 in.)
Ball socket (h1)
3.00
mm
Spherical Disk (h2)
3.50
mm
Overall Height (H)
4.70
mm
Self Aligning Washers - 5x7x15 mm Sets
Material: Carbon Spring Steel Self Finish    Radius (R): 15.00 mm    Compensation angle: 3 °   
Category: Washers - Self Aligning - Sets - Plastic
Part Number: W0050-ALN-W-SET (PK-10)
Out of Stock | Backorder Now | Orders can be expected around Wed, Feb 11, 2026
$173.50 AUD
$173.50 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Nominal Inside Diameter (B) Housing Pad Bore (d3) OD (d2) Ball socket (h1) Indicative
Image
Self Aligning Washers - 5x7x15 mm Sets - Carbon Spring Steel Self Finish Washer
Nominal Inside Diameter (B)
5.00
mm
+ 0.20 / - 0.00
(Equiv. 0.197 in.)
Housing Pad Bore (d3)
7.00
mm

(Equiv. 0.276 in.)
OD (d2)
15.00
mm

(Equiv. 0.591 in.)
Ball socket (h1)
3.00
mm
Self Aligning Washers - 5x7x15 mm Sets
Material: Carbon Spring Steel Self Finish    Spherical Disk (h2): 3.50 mm    Overall Height (H): 4.70 mm    Radius (R): 15.00 mm    Compensation angle: 3 °   
Category: Washers - Self Aligning - Sets - Plastic
Part Number: W0050-ALN-W-SET (PK-10)
Out of Stock | Backorder Now | Orders can be expected around Wed, Feb 11, 2026
$173.50 AUD
$173.50 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Self Aligning Washers - 6.35x7.137x15.88 mm Sets - Carbon Steel Hardened Washer
Nominal Inside Diameter (B)
6.35
mm

(Equiv. 0.25 in.)
Housing Pad Bore (d3)
7.137
mm
+/- 0.38
(Equiv. 0.281 in.)
OD (d2)
15.88
mm
+ /- 0.38
(Equiv. 0.625 in.)
Ball socket (h1)
4.750
mm
+/- 0.38
Self Aligning Washers - 6.35x7.137x15.88 mm - Carbon Steel Hardened
Material: Carbon Steel Hardened   
Category: Washers - Self Aligning - Sets - Hardened Steel
Part Number: W0064-ALN-C-SET (Each)
5 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$9.68 AUD
$9.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 5 available can be backordered.
Self Aligning Washers - 6.35x7.137x15.88 mm Sets - Carbon Steel Hardened Washer
Nominal Inside Diameter (B)
6.35
mm

(Equiv. 0.25 in.)
Housing Pad Bore (d3)
7.137
mm
+/- 0.38
(Equiv. 0.281 in.)
OD (d2)
15.88
mm
+ /- 0.38
(Equiv. 0.625 in.)
Ball socket (h1)
4.750
mm
+/- 0.38
Self Aligning Washers - 6.35x7.137x15.88 mm - Carbon Steel Hardened
Material: Carbon Steel Hardened   
Category: Washers - Self Aligning - Sets - Hardened Steel
Part Number: W0064-ALN-C-SET (Each)
5 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$9.68 AUD
$9.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

5 Available Now. Backorder if more than 5.
Self Aligning Washers - 9.53x10.319x22.23 mm Sets - Carbon Steel Hardened Washer
Nominal Inside Diameter (B)
9.53
mm

(Equiv. 0.375 in.)
Housing Pad Bore (d3)
10.319
mm
+/- 0.38
(Equiv. 0.406 in.)
OD (d2)
22.23
mm
+ /- 0.38
(Equiv. 0.875 in.)
Ball socket (h1)
6.350
mm
+/- 0.38
Self Aligning Washers - 9.53x10.319x22.23 mm - Carbon Steel Hardened
Material: Carbon Steel Hardened   
Category: Washers - Self Aligning - Sets - Hardened Steel
Part Number: W0095-ALN-C-SET (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$8.05 AUD
$8.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Self Aligning Washers - 9.53x10.319x22.23 mm Sets - Carbon Steel Hardened Washer
Nominal Inside Diameter (B)
9.53
mm

(Equiv. 0.375 in.)
Housing Pad Bore (d3)
10.319
mm
+/- 0.38
(Equiv. 0.406 in.)
OD (d2)
22.23
mm
+ /- 0.38
(Equiv. 0.875 in.)
Ball socket (h1)
6.350
mm
+/- 0.38
Self Aligning Washers - 9.53x10.319x22.23 mm - Carbon Steel Hardened
Material: Carbon Steel Hardened   
Category: Washers - Self Aligning - Sets - Hardened Steel
Part Number: W0095-ALN-C-SET (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$8.05 AUD
$8.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Self Aligning Washers - 12.7x13.494x28.58 mm Sets - Carbon Steel Hardened Washer
Nominal Inside Diameter (B)
12.70
mm

(Equiv. 0.5 in.)
Housing Pad Bore (d3)
13.494
mm
+/- 0.38
(Equiv. 0.531 in.)
OD (d2)
28.58
mm
+ /- 0.38
(Equiv. 1.125 in.)
Ball socket (h1)
7.925
mm
+/- 0.38
Self Aligning Washers - 12.7x13.494x28.58 mm - Carbon Steel Hardened
Material: Carbon Steel Hardened   
Category: Washers - Self Aligning - Sets - Hardened Steel
Part Number: W0127-ALN-C-SET (Each)
3 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$18.86 AUD
$18.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 3 available can be backordered.
Self Aligning Washers - 12.7x13.494x28.58 mm Sets - Carbon Steel Hardened Washer
Nominal Inside Diameter (B)
12.70
mm

(Equiv. 0.5 in.)
Housing Pad Bore (d3)
13.494
mm
+/- 0.38
(Equiv. 0.531 in.)
OD (d2)
28.58
mm
+ /- 0.38
(Equiv. 1.125 in.)
Ball socket (h1)
7.925
mm
+/- 0.38
Self Aligning Washers - 12.7x13.494x28.58 mm - Carbon Steel Hardened
Material: Carbon Steel Hardened   
Category: Washers - Self Aligning - Sets - Hardened Steel
Part Number: W0127-ALN-C-SET (Each)
3 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$18.86 AUD
$18.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

3 Available Now. Backorder if more than 3.
Self Aligning Washers - 12.7x13.494x28.58 mm Sets - Stainless Steel Washer
Nominal Inside Diameter (B)
12.70
mm

(Equiv. 0.5 in.)
Housing Pad Bore (d3)
13.494
mm
+/- 0.38
(Equiv. 0.531 in.)
OD (d2)
28.58
mm
+ /- 0.38
(Equiv. 1.125 in.)
Ball socket (h1)
7.925
mm
+/- 0.38
Self Aligning Washers - 12.7x13.494x28.58 mm - Stainless Steel
Material: Stainless Steel   
Category: Washers - Self Aligning - Sets - Stainless Steel
Part Number: W0127-ALN-SS-SET (Each)
3 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$23.86 AUD
$23.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 3 available can be backordered.
Self Aligning Washers - 12.7x13.494x28.58 mm Sets - Stainless Steel Washer
Nominal Inside Diameter (B)
12.70
mm

(Equiv. 0.5 in.)
Housing Pad Bore (d3)
13.494
mm
+/- 0.38
(Equiv. 0.531 in.)
OD (d2)
28.58
mm
+ /- 0.38
(Equiv. 1.125 in.)
Ball socket (h1)
7.925
mm
+/- 0.38
Self Aligning Washers - 12.7x13.494x28.58 mm - Stainless Steel
Material: Stainless Steel   
Category: Washers - Self Aligning - Sets - Stainless Steel
Part Number: W0127-ALN-SS-SET (Each)
3 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$23.86 AUD
$23.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

3 Available Now. Backorder if more than 3.
Self Aligning Washers - 15.88x16.662x34.93 mm Sets - Stainless Steel Washer
Nominal Inside Diameter (B)
15.88
mm

(Equiv. 0.625 in.)
Housing Pad Bore (d3)
16.662
mm
+/- 0.38
(Equiv. 0.656 in.)
OD (d2)
34.93
mm
+ /- 0.38
(Equiv. 1.375 in.)
Ball socket (h1)
7.925
mm
+/- 0.38
Self Aligning Washers - 15.88x16.662x34.93 mm - Stainless Steel
Material: Stainless Steel   
Category: Washers - Self Aligning - Sets - Stainless Steel
Part Number: W0159-ALN-SS-SET (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$26.05 AUD
$26.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Self Aligning Washers - 15.88x16.662x34.93 mm Sets - Stainless Steel Washer
Nominal Inside Diameter (B)
15.88
mm

(Equiv. 0.625 in.)
Housing Pad Bore (d3)
16.662
mm
+/- 0.38
(Equiv. 0.656 in.)
OD (d2)
34.93
mm
+ /- 0.38
(Equiv. 1.375 in.)
Ball socket (h1)
7.925
mm
+/- 0.38
Self Aligning Washers - 15.88x16.662x34.93 mm - Stainless Steel
Material: Stainless Steel   
Category: Washers - Self Aligning - Sets - Stainless Steel
Part Number: W0159-ALN-SS-SET (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$26.05 AUD
$26.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Self Aligning Washers - 22.23x23.813x44.45 mm Sets - Carbon Steel Hardened Washer
Nominal Inside Diameter (B)
22.23
mm

(Equiv. 0.875 in.)
Housing Pad Bore (d3)
23.813
mm
+/- 0.38
(Equiv. 0.938 in.)
OD (d2)
44.45
mm
+ /- 0.38
(Equiv. 1.75 in.)
Ball socket (h1)
9.525
mm
+/- 0.38
Self Aligning Washers - 22.23x23.813x44.45 mm - Carbon Steel Hardened
Material: Carbon Steel Hardened   
Category: Washers - Self Aligning - Sets - Hardened Steel
Part Number: W0222-ALN-C-SET (Each)
2 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$18.14 AUD
$21.76 AUD $18.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 2 available can be backordered.
Self Aligning Washers - 22.23x23.813x44.45 mm Sets - Carbon Steel Hardened Washer
Nominal Inside Diameter (B)
22.23
mm

(Equiv. 0.875 in.)
Housing Pad Bore (d3)
23.813
mm
+/- 0.38
(Equiv. 0.938 in.)
OD (d2)
44.45
mm
+ /- 0.38
(Equiv. 1.75 in.)
Ball socket (h1)
9.525
mm
+/- 0.38
Self Aligning Washers - 22.23x23.813x44.45 mm - Carbon Steel Hardened
Material: Carbon Steel Hardened   
Category: Washers - Self Aligning - Sets - Hardened Steel
Part Number: W0222-ALN-C-SET (Each)
2 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$18.14 AUD
$21.76 AUD $18.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Self Aligning Washers - 25.4x26.975x50.8 mm Sets - Carbon Steel Hardened Washer
Nominal Inside Diameter (B)
25.40
mm

(Equiv. 1 in.)
Housing Pad Bore (d3)
26.975
mm
+/- 0.38
(Equiv. 1.062 in.)
OD (d2)
50.80
mm
+ /- 0.38
(Equiv. 2 in.)
Ball socket (h1)
12.70
mm
+/- 0.38
Self Aligning Washers - 25.4x26.975x50.8 mm - Carbon Steel Hardened
Material: Carbon Steel Hardened   
Category: Washers - Self Aligning - Sets - Hardened Steel
Part Number: W0254-ALN-C-SET (Each)
12 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$36.59 AUD
$36.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 12 available can be backordered.
Self Aligning Washers - 25.4x26.975x50.8 mm Sets - Carbon Steel Hardened Washer
Nominal Inside Diameter (B)
25.40
mm

(Equiv. 1 in.)
Housing Pad Bore (d3)
26.975
mm
+/- 0.38
(Equiv. 1.062 in.)
OD (d2)
50.80
mm
+ /- 0.38
(Equiv. 2 in.)
Ball socket (h1)
12.70
mm
+/- 0.38
Self Aligning Washers - 25.4x26.975x50.8 mm - Carbon Steel Hardened
Material: Carbon Steel Hardened   
Category: Washers - Self Aligning - Sets - Hardened Steel
Part Number: W0254-ALN-C-SET (Each)
12 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$36.59 AUD
$36.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

12 Available Now. Backorder if more than 12.
Self Aligning Washers - 31.75x33.325x66.68 mm Sets - Carbon Steel Hardened Washer
Nominal Inside Diameter (B)
31.75
mm

(Equiv. 1.25 in.)
Housing Pad Bore (d3)
33.325
mm
+/- 0.38
(Equiv. 1.312 in.)
OD (d2)
66.68
mm
+ /- 0.38
(Equiv. 2.625 in.)
Ball socket (h1)
12.70
mm
+/- 0.38
Self Aligning Washers - 31.75x33.325x66.68 mm - Carbon Steel Hardened
Material: Carbon Steel Hardened   
Category: Washers - Self Aligning - Sets - Hardened Steel
Part Number: W0318-ALN-C-SET (Each)
1 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$68.59 AUD
$68.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 1 available can be backordered.
Self Aligning Washers - 31.75x33.325x66.68 mm Sets - Carbon Steel Hardened Washer
Nominal Inside Diameter (B)
31.75
mm

(Equiv. 1.25 in.)
Housing Pad Bore (d3)
33.325
mm
+/- 0.38
(Equiv. 1.312 in.)
OD (d2)
66.68
mm
+ /- 0.38
(Equiv. 2.625 in.)
Ball socket (h1)
12.70
mm
+/- 0.38
Self Aligning Washers - 31.75x33.325x66.68 mm - Carbon Steel Hardened
Material: Carbon Steel Hardened   
Category: Washers - Self Aligning - Sets - Hardened Steel
Part Number: W0318-ALN-C-SET (Each)
1 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$68.59 AUD
$68.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. Backorder if more than 1.