Washers - Self Aligning - Sets - Stainless Steel

Washers -> Self Aligning -> Sets -> Stainless Steel

There are 2 products in the sub-categories of Washers - Self Aligning - Sets - Stainless Steel. Browse the Washers - Self Aligning - Sets - Stainless Steel products table.

Category Details

A selection of Stainless Steel Sets Self Aligning Washers. Complete set, containing both aligning and seating washers.

  • Self-aligning washers are designed to compensate for misalignment between connected parts. An expanded range may be available on special order. Please enquire.
  • Consists of a convex and concave washer that swivel slightly when nested, allowing them to adapt to slight angles and uneven surfaces. This helps to distribute load evenly and reduce stress on the connection.
  • AISI 303 Stainless Steel
  • Max Shaft Size Shown will allow 3 Deg of misalignment.
  • DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

Small Parts & Bearings

Additional resources:


A more comprehensive listing may be found in the Washers - Self Aligning - Sets - Stainless Steel category on the MBA Minibearings main store.
Suitable Shaft or Bolt Size Bore Size (A) OD (B) Overall Height (C) Indicative
Image
Self Aligning Washers - 12.7x13.494x28.58 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
12.70
mm

(Equiv. 0.5 in.)
Bore Size (A)
13.494
mm
+/- 0.38
(Equiv. 0.531 in.)
OD (B)
28.58
mm
+ /- 0.38
(Equiv. 1.125 in.)
Overall Height (C)
7.925
mm
+/- 0.38
Self Aligning Washers - 12.7x13.494x28.58 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 12.7 mm   
Part Number: W0127-ALN-SS-SET (Each)
3 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$23.86 AUD
$23.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 3 available can be backordered.
Suitable Shaft or Bolt Size Bore Size (A) OD (B) Overall Height (C) Indicative
Image
Self Aligning Washers - 12.7x13.494x28.58 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
12.70
mm

(Equiv. 0.5 in.)
Bore Size (A)
13.494
mm
+/- 0.38
(Equiv. 0.531 in.)
OD (B)
28.58
mm
+ /- 0.38
(Equiv. 1.125 in.)
Overall Height (C)
7.925
mm
+/- 0.38
Self Aligning Washers - 12.7x13.494x28.58 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 12.7 mm   
Part Number: W0127-ALN-SS-SET (Each)
3 Available Now | Further orders can be expected around Tue, Jan 20, 2026
$23.86 AUD
$23.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

3 Available Now. Backorder if more than 3.
Self Aligning Washers - 15.88x16.662x34.93 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
15.88
mm

(Equiv. 0.625 in.)
Bore Size (A)
16.662
mm
+/- 0.38
(Equiv. 0.656 in.)
OD (B)
34.93
mm
+ /- 0.38
(Equiv. 1.375 in.)
Overall Height (C)
7.925
mm
+/- 0.38
Self Aligning Washers - 15.88x16.662x34.93 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 15.875 mm   
Part Number: W0159-ALN-SS-SET (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$26.05 AUD
$26.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Self Aligning Washers - 15.88x16.662x34.93 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
15.88
mm

(Equiv. 0.625 in.)
Bore Size (A)
16.662
mm
+/- 0.38
(Equiv. 0.656 in.)
OD (B)
34.93
mm
+ /- 0.38
(Equiv. 1.375 in.)
Overall Height (C)
7.925
mm
+/- 0.38
Self Aligning Washers - 15.88x16.662x34.93 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 15.875 mm   
Part Number: W0159-ALN-SS-SET (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$26.05 AUD
$26.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.