Washers - Self Aligning - Components - Hardened Steel

9 Products in this selection
  • Spherical Seat Washers. Washer A (aligning) and washer B (seat) sold separately.
  • Case Hardened steel 9 S Mn Pb 28 K DIN 6319.
  • Order a base washer and an aligning washer to make a complete unit.
  • Max Shaft Size Shown will allow 3o of misalignment.
  • DIN 6319-G washers are used for clamping mechanical parts with non-parallel surfaces.
  • Designed for screw solidity in compliance with 8.8. Limited for use on flat closed ring areas - not for elongated holes.
Additional resources:
Screws

A more comprehensive listing may be found on the MBA Minibearings main store at Washers - Self Aligning - Components - Hardened Steel.
Suits Shaft or Bolt Size Bore Size (d1 or d2) OD (d3) Thickness (h2 or h3) Overall Thickness (h4) Radius (r) Indicative
Image
8.00
mm 		8.4
mm 		17.00
mm 		3.2
mm 		5.0
mm 		12.0
mm 		1081302 | W0080-ALN-CA --- Self Aligning Washers - 8x8.4x17 mm - Carbon Steel - Hardened
Material: Carbon Steel - Hardened    Static Load Rating: 17 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 8 mm    Standard: DIN 6319C   
Part Number: W0080-ALN-CA Self Aligning Washers - 8x8.4x17 mm - Carbon Steel - Hardened
6 Available Now | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$2.00 AUD
$3.80 AUD $2.00 AUD
Each
Suits Shaft or Bolt Size Bore Size (d1 or d2) OD (d3) Thickness (h2 or h3) Indicative
Image
8.00
mm 		8.4
mm 		17.00
mm 		3.2
mm 		1081302 | W0080-ALN-CA --- Self Aligning Washers - 8x8.4x17 mm - Carbon Steel - Hardened
Material: Carbon Steel - Hardened    Overall Thickness (h4): 5.0 mm    Radius (r): 12.0 mm    Static Load Rating: 17 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 8 mm    Standard: DIN 6319C   
Part Number: W0080-ALN-CA Self Aligning Washers - 8x8.4x17 mm - Carbon Steel - Hardened
6 Available Now | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$2.00 AUD
$3.80 AUD $2.00 AUD
Each
8.00
mm 		9.6
mm 		17.00
mm 		3.5
mm 		5.0
mm 		1081363 | W0080-ALN-CB --- Self Aligning Washers - 8x9.6x17 mm - Carbon Steel - Hardened
Material: Carbon Steel - Hardened    Static Load Rating: 17 Max. kN    Type: Washer B (Base)    Actual ID (Ref): 8 mm    Standard: DIN 6319D   
Part Number: W0080-ALN-CB Self Aligning Washers - 8x9.6x17 mm - Carbon Steel - Hardened
10 Available Now | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$2.00 AUD
$3.80 AUD $2.00 AUD
Each
8.00
mm 		9.6
mm 		17.00
mm 		3.5
mm 		1081363 | W0080-ALN-CB --- Self Aligning Washers - 8x9.6x17 mm - Carbon Steel - Hardened
Material: Carbon Steel - Hardened    Overall Thickness (h4): 5.0 mm    Static Load Rating: 17 Max. kN    Type: Washer B (Base)    Actual ID (Ref): 8 mm    Standard: DIN 6319D   
Part Number: W0080-ALN-CB Self Aligning Washers - 8x9.6x17 mm - Carbon Steel - Hardened
10 Available Now | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$2.00 AUD
$3.80 AUD $2.00 AUD
Each
20.00
mm 		21
mm 		36.00
mm 		6.3
mm 		11.5
mm 		27.0
mm 		1124218 | W0200-ALN-CA --- Self Aligning Washers - 20x21x36 mm - Carbon Steel - Hardened
Material: Carbon Steel - Hardened    Static Load Rating: 117 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 20 mm    Standard: DIN 6319C   
Part Number: W0200-ALN-CA Self Aligning Washers - 20x21x36 mm - Carbon Steel - Hardened
5 Available Now | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$4.88 AUD
$9.28 AUD $4.88 AUD
Each
20.00
mm 		21
mm 		36.00
mm 		6.3
mm 		1124218 | W0200-ALN-CA --- Self Aligning Washers - 20x21x36 mm - Carbon Steel - Hardened
Material: Carbon Steel - Hardened    Overall Thickness (h4): 11.5 mm    Radius (r): 27.0 mm    Static Load Rating: 117 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 20 mm    Standard: DIN 6319C   
Part Number: W0200-ALN-CA Self Aligning Washers - 20x21x36 mm - Carbon Steel - Hardened
5 Available Now | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$4.88 AUD
$9.28 AUD $4.88 AUD
Each
20.00
mm 		23.2
mm 		36.00
mm 		7.5
mm 		11.5
mm 		1124385 | W0200-ALN-CB --- Self Aligning Washers - 20x23.2x36 mm - Carbon Steel - Hardened
Material: Carbon Steel - Hardened    Static Load Rating: 117 Max. kN    Type: Washer B (Base)    Actual ID (Ref): 20 mm    Standard: DIN 6319D   
Part Number: W0200-ALN-CB Self Aligning Washers - 20x23.2x36 mm - Carbon Steel - Hardened
5 Available Now | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.10 AUD
$9.69 AUD $5.10 AUD
Each
20.00
mm 		23.2
mm 		36.00
mm 		7.5
mm 		1124385 | W0200-ALN-CB --- Self Aligning Washers - 20x23.2x36 mm - Carbon Steel - Hardened
Material: Carbon Steel - Hardened    Overall Thickness (h4): 11.5 mm    Static Load Rating: 117 Max. kN    Type: Washer B (Base)    Actual ID (Ref): 20 mm    Standard: DIN 6319D   
Part Number: W0200-ALN-CB Self Aligning Washers - 20x23.2x36 mm - Carbon Steel - Hardened
5 Available Now | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.10 AUD
$9.69 AUD $5.10 AUD
Each
24.00
mm 		25
mm 		44.00
mm 		8.2
mm 		15.0
mm 		32.0
mm 		1131142 | W0240-ALN-CA --- Self Aligning Washers - 24x25x44 mm - Carbon Steel - Hardened
Material: Carbon Steel - Hardened    Static Load Rating: 168 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 24 mm    Standard: DIN 6319C   
Part Number: W0240-ALN-CA Self Aligning Washers - 24x25x44 mm - Carbon Steel - Hardened
3 Available Now | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Each
24.00
mm 		25
mm 		44.00
mm 		8.2
mm 		1131142 | W0240-ALN-CA --- Self Aligning Washers - 24x25x44 mm - Carbon Steel - Hardened
Material: Carbon Steel - Hardened    Overall Thickness (h4): 15.0 mm    Radius (r): 32.0 mm    Static Load Rating: 168 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 24 mm    Standard: DIN 6319C   
Part Number: W0240-ALN-CA Self Aligning Washers - 24x25x44 mm - Carbon Steel - Hardened
3 Available Now | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Each
24.00
mm 		28
mm 		44.00
mm 		9.5
mm 		15.0
mm 		1131234 | W0240-ALN-CB --- Self Aligning Washers - 24x28x44 mm - Carbon Steel - Hardened
Material: Carbon Steel - Hardened    Static Load Rating: 168 Max. kN    Type: Washer B (Base)    Actual ID (Ref): 24 mm    Standard: DIN 6319D   
Part Number: W0240-ALN-CB Self Aligning Washers - 24x28x44 mm - Carbon Steel - Hardened
3 Available Now | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Each
24.00
mm 		28
mm 		44.00
mm 		9.5
mm 		1131234 | W0240-ALN-CB --- Self Aligning Washers - 24x28x44 mm - Carbon Steel - Hardened
Material: Carbon Steel - Hardened    Overall Thickness (h4): 15.0 mm    Static Load Rating: 168 Max. kN    Type: Washer B (Base)    Actual ID (Ref): 24 mm    Standard: DIN 6319D   
Part Number: W0240-ALN-CB Self Aligning Washers - 24x28x44 mm - Carbon Steel - Hardened
3 Available Now | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Each
36.00
mm 		37
mm 		68.00
mm 		14.0
mm 		23.0
mm 		50.0
mm 		1149554 | W0360-ALN-CA (5 Pcs) --- Self Aligning Washers - 36x37x68 mm - Carbon Steel - Hardened
Material: Carbon Steel - Hardened    Static Load Rating: 394 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 36 mm    Standard: DIN 6319C   
Part Number: W0360-ALN-CA (5 Pcs) Self Aligning Washers - 36x37x68 mm - Carbon Steel - Hardened
1 pack (5 pcs) Available Now | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$63.34 AUD
$120.34 AUD $63.34 AUD
Per 5
36.00
mm 		37
mm 		68.00
mm 		14.0
mm 		1149554 | W0360-ALN-CA (5 Pcs) --- Self Aligning Washers - 36x37x68 mm - Carbon Steel - Hardened
Material: Carbon Steel - Hardened    Overall Thickness (h4): 23.0 mm    Radius (r): 50.0 mm    Static Load Rating: 394 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 36 mm    Standard: DIN 6319C   
Part Number: W0360-ALN-CA (5 Pcs) Self Aligning Washers - 36x37x68 mm - Carbon Steel - Hardened
1 pack (5 pcs) Available Now | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$63.34 AUD
$120.34 AUD $63.34 AUD
Per 5
42.00
mm 		43
mm 		78.00
mm 		17.0
mm 		29.0
mm 		58.0
mm 		1155723 | W0420-ALN-CA --- Self Aligning Washers - 42x43x78 mm - Carbon Steel - Hardened
Material: Carbon Steel - Hardened    Static Load Rating: 542 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 42 mm    Standard: DIN 6319C   
Part Number: W0420-ALN-CA Self Aligning Washers - 42x43x78 mm - Carbon Steel - Hardened
2 Available Now | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$42.00 AUD
$79.80 AUD $42.00 AUD
Each
42.00
mm 		43
mm 		78.00
mm 		17.0
mm 		1155723 | W0420-ALN-CA --- Self Aligning Washers - 42x43x78 mm - Carbon Steel - Hardened
Material: Carbon Steel - Hardened    Overall Thickness (h4): 29.0 mm    Radius (r): 58.0 mm    Static Load Rating: 542 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 42 mm    Standard: DIN 6319C   
Part Number: W0420-ALN-CA Self Aligning Washers - 42x43x78 mm - Carbon Steel - Hardened
2 Available Now | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$42.00 AUD
$79.80 AUD $42.00 AUD
Each
42.00
mm 		49
mm 		78.00
mm 		18.0
mm 		29.0
mm 		1155768 | W0420-ALN-CB --- Self Aligning Washers - 42x49x78 mm - Carbon Steel - Hardened
Material: Carbon Steel - Hardened    Static Load Rating: 542 Max. kN    Type: Washer B (Base)    Actual ID (Ref): 42 mm    Standard: DIN 6319D   
Part Number: W0420-ALN-CB Self Aligning Washers - 42x49x78 mm - Carbon Steel - Hardened
2 Available Now | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$42.00 AUD
$79.80 AUD $42.00 AUD
Each
42.00
mm 		49
mm 		78.00
mm 		18.0
mm 		1155768 | W0420-ALN-CB --- Self Aligning Washers - 42x49x78 mm - Carbon Steel - Hardened
Material: Carbon Steel - Hardened    Overall Thickness (h4): 29.0 mm    Static Load Rating: 542 Max. kN    Type: Washer B (Base)    Actual ID (Ref): 42 mm    Standard: DIN 6319D   
Part Number: W0420-ALN-CB Self Aligning Washers - 42x49x78 mm - Carbon Steel - Hardened
2 Available Now | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$42.00 AUD
$79.80 AUD $42.00 AUD
Each