Plungers - Ball Threaded - Steel Body and Ball with Threadlock

Plungers -> Ball Threaded -> Steel Body and Ball with Threadlock

There are 4 products in the sub-categories of Plungers - Ball Threaded - Steel Body and Ball with Threadlock. Browse the Plungers - Ball Threaded - Steel Body and Ball with Threadlock products table.

Category Details

A selection of Steel Body and Ball with Threadlock Ball Threaded Plungers. With Long-Lok thread locking compound to prevent loosening

  • Spring-loaded mechanical component with a threaded body, used for locating, securing, or applying pressure.
  • When pressure is applied to the ball, it compresses the internal spring and can be temporarily pushed into the body, allowing parts to be moved, and then it springs back to its original position to hold them in place.
  • Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Small Parts & Bearings

Additional resources:


A more comprehensive listing may be found in the Plungers - Ball Threaded - Steel Body and Ball with Threadlock category on the MBA Minibearings main store.
Thread Size (D) Body Length (L) Initial Pressure (F1) Final Pressure (F2) Ball Diameter (D1) Ball Height (H) Indicative
Image
Thread Size (D)
M8 (8x1.25mm)

Body Length (L)
16.0
mm

(Equiv. 0.63 in.)
Initial Pressure (F1)
12.7
N
Final Pressure (F2)
39.2
N
Ball Diameter (D1)
5.0
mm
Ball Height (H)
1.5
mm
Ball Threaded Plungers - M8 - 8x1.25mm - 16 mm - 12.7 N Steel Body and Ball with Threadlock - Steel
Material: Steel   
Part Number: PLBT-080M-160-CLK-039 (Each)
Ball Threaded Plungers - M8 - 8x1.25mm - 16 mm - 12.7 N Steel Body and Ball with Threadlock - Steel Plunger
5 Available Now | Further orders can be expected around Tue, Dec 30, 2025
$6.05 AUD
$12.20 AUD $6.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

5 Available Now. Backorder if more than 5.
Thread Size (D) Body Length (L) Initial Pressure (F1) Final Pressure (F2) Indicative
Image
Thread Size (D)
M8 (8x1.25mm)

Body Length (L)
16.0
mm

(Equiv. 0.63 in.)
Initial Pressure (F1)
12.7
N
Final Pressure (F2)
39.2
N
Ball Threaded Plungers - M8 - 8x1.25mm - 16 mm - 12.7 N Steel Body and Ball with Threadlock - Steel
Material: Steel    Ball Diameter (D1): 5.0 mm    Ball Height (H): 1.5 mm   
Part Number: PLBT-080M-160-CLK-039 (Each)
Ball Threaded Plungers - M8 - 8x1.25mm - 16 mm - 12.7 N Steel Body and Ball with Threadlock - Steel Plunger
5 Available Now | Further orders can be expected around Tue, Dec 30, 2025
$6.05 AUD
$12.20 AUD $6.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

5 Available Now. Backorder if more than 5.
Thread Size (D)
3/8-16 UNC (9.53mm)

Body Length (L)
19.1
mm

(Equiv. 0.752 in.)
Initial Pressure (F1)
20.0
N
Final Pressure (F2)
35.0
N
Ball Diameter (D1)
6.1
mm
Ball Height (H)
2.0
mm
Ball Threaded Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 20 N Steel Body and Ball with Threadlock - Steel
Material: Steel    Drive: Slotted   
Part Number: PLBT-095C-191-CLK-035 (Each)
Ball Threaded Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 20 N Steel Body and Ball with Threadlock - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Tue, Dec 30, 2025
$14.95 AUD
$14.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (D)
3/8-16 UNC (9.53mm)

Body Length (L)
19.1
mm

(Equiv. 0.752 in.)
Initial Pressure (F1)
20.0
N
Final Pressure (F2)
35.0
N
Ball Threaded Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 20 N Steel Body and Ball with Threadlock - Steel
Material: Steel    Ball Diameter (D1): 6.1 mm    Ball Height (H): 2.0 mm    Drive: Slotted   
Part Number: PLBT-095C-191-CLK-035 (Each)
Ball Threaded Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 20 N Steel Body and Ball with Threadlock - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Tue, Dec 30, 2025
$14.95 AUD
$14.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (D)
M10 (10x1.5mm)

Body Length (L)
19.0
mm

(Equiv. 0.748 in.)
Initial Pressure (F1)
18.6
N
Final Pressure (F2)
49.0
N
Ball Diameter (D1)
6.0
mm
Ball Height (H)
2.1
mm
Ball Threaded Plungers - M10 - 10x1.5mm - 19 mm - 18.6 N Steel Body and Ball with Threadlock - Steel
Material: Steel   
Part Number: PLBT-100M-190-CLK-049 (Each)
Ball Threaded Plungers - M10 - 10x1.5mm - 19 mm - 18.6 N Steel Body and Ball with Threadlock - Steel Plunger
1 Available Now | Further orders can be expected around Tue, Dec 30, 2025
$6.23 AUD
$12.56 AUD $6.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. Backorder if more than 1.
Thread Size (D)
M10 (10x1.5mm)

Body Length (L)
19.0
mm

(Equiv. 0.748 in.)
Initial Pressure (F1)
18.6
N
Final Pressure (F2)
49.0
N
Ball Threaded Plungers - M10 - 10x1.5mm - 19 mm - 18.6 N Steel Body and Ball with Threadlock - Steel
Material: Steel    Ball Diameter (D1): 6.0 mm    Ball Height (H): 2.1 mm   
Part Number: PLBT-100M-190-CLK-049 (Each)
Ball Threaded Plungers - M10 - 10x1.5mm - 19 mm - 18.6 N Steel Body and Ball with Threadlock - Steel Plunger
1 Available Now | Further orders can be expected around Tue, Dec 30, 2025
$6.23 AUD
$12.56 AUD $6.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. Backorder if more than 1.
Thread Size (D)
M12 (12x1.75mm)

Body Length (L)
22.0
mm

(Equiv. 0.866 in.)
Initial Pressure (F1)
19.6
N
Final Pressure (F2)
55.0
N
Ball Diameter (D1)
8.0
mm
Ball Height (H)
2.5
mm
Ball Threaded Plungers - M12 - 12x1.75mm - 22 mm - 19.6 N Steel Body and Ball with Threadlock - Steel Plunger
Material: Steel   
Deleted Item. Available while stocks last.
Part Number: PLBT-120M-220-CLK-055 (Each)
Ball Threaded Plungers - M12 - 12x1.75mm - 22 mm - 19.6 N Steel Body and Ball with Threadlock - Steel Plunger
1 Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$28.27 AUD $12.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Thread Size (D)
M12 (12x1.75mm)

Body Length (L)
22.0
mm

(Equiv. 0.866 in.)
Initial Pressure (F1)
19.6
N
Final Pressure (F2)
55.0
N
Ball Threaded Plungers - M12 - 12x1.75mm - 22 mm - 19.6 N Steel Body and Ball with Threadlock - Steel Plunger
Material: Steel    Ball Diameter (D1): 8.0 mm    Ball Height (H): 2.5 mm   
Deleted Item. Available while stocks last.
Part Number: PLBT-120M-220-CLK-055 (Each)
Ball Threaded Plungers - M12 - 12x1.75mm - 22 mm - 19.6 N Steel Body and Ball with Threadlock - Steel Plunger
1 Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$28.27 AUD $12.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. These are priced to quit. Please contact us for a quote if you require more.