Gears - Worm Sets - Module 0.5

Gears -> Worm Sets -> Module 0.5

There are 5 products in the sub-categories of Gears - Worm Sets - Module 0.5. Browse the Gears - Worm Sets - Module 0.5 products table.

Category Details

A selection of Module 0.5 Worm Sets Gears. This is the main category in this series

  • Acetal gear and steel worm sets.
  • Metric sets only.
  • An expanded range may be available on special order. Please enquire.

Small Parts & Bearings

Additional resources:


A more comprehensive listing may be found in the Gears - Worm Sets - Module 0.5 category on the MBA Minibearings main store.
Pitch Teeth Bore (dd) Direction Ratio Lead Angle Indicative
Image
Worm Sets Gears - Pitch Module 0.5 - 20 tooth - 3 mm Module 0.5 - Polyacetal and Steel Gear
Pitch
Module 0.5
Teeth
20
Bore (dd)
3.00
mm
Direction
Right Hand
Ratio
20 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 0.5 - 20 - 3 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 5.00 mm    Hub Diameter: 9.00 mm    Centre Distance (A): 9.5 mm    Gear Length (l): 11 mm    Hub Projection (lh): 6 mm    Tip Diameter (da): 11.3 mm   
Part Number: WGS1-050-020-030-R-ACS (PK-10)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 18, 2026
$190.05 AUD
$228.05 AUD $190.05 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pitch Teeth Bore (dd) Direction Indicative
Image
Worm Sets Gears - Pitch Module 0.5 - 20 tooth - 3 mm Module 0.5 - Polyacetal and Steel Gear
Pitch
Module 0.5
Teeth
20
Bore (dd)
3.00
mm
Direction
Right Hand
Worm Sets Gears - Pitch 0.5 - 20 - 3 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 20 to 1    Lead Angle: 1 Deg    Face Width (b): 5.00 mm    Hub Diameter: 9.00 mm    Centre Distance (A): 9.5 mm    Gear Length (l): 11 mm    Hub Projection (lh): 6 mm    Tip Diameter (da): 11.3 mm   
Part Number: WGS1-050-020-030-R-ACS (PK-10)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 18, 2026
$190.05 AUD
$228.05 AUD $190.05 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 0.5 - 30 tooth - 4 mm Module 0.5 - Polyacetal and Steel Gear
Pitch
Module 0.5
Teeth
30
Bore (dd)
4.00
mm
Direction
Right Hand
Ratio
30 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 0.5 - 30 - 4 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 5.00 mm    Hub Diameter: 12.00 mm    Centre Distance (A): 12 mm    Gear Length (l): 11 mm    Hub Projection (lh): 6 mm    Tip Diameter (da): 16.3 mm   
Part Number: WGS1-050-030-040-R-ACS (PK-10)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 18, 2026
$197.77 AUD
$237.33 AUD $197.77 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 0.5 - 30 tooth - 4 mm Module 0.5 - Polyacetal and Steel Gear
Pitch
Module 0.5
Teeth
30
Bore (dd)
4.00
mm
Direction
Right Hand
Worm Sets Gears - Pitch 0.5 - 30 - 4 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 30 to 1    Lead Angle: 1 Deg    Face Width (b): 5.00 mm    Hub Diameter: 12.00 mm    Centre Distance (A): 12 mm    Gear Length (l): 11 mm    Hub Projection (lh): 6 mm    Tip Diameter (da): 16.3 mm   
Part Number: WGS1-050-030-040-R-ACS (PK-10)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 18, 2026
$197.77 AUD
$237.33 AUD $197.77 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 0.5 - 40 tooth - 5 mm Module 0.5 - Polyacetal and Steel Gear
Pitch
Module 0.5
Teeth
40
Bore (dd)
5.00
mm
Direction
Right Hand
Ratio
40 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 0.5 - 40 - 5 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 5.00 mm    Hub Diameter: 15.00 mm    Centre Distance (A): 14.5 mm    Gear Length (l): 13 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 21.3 mm   
Part Number: WGS1-050-040-050-R-ACS (PK-10)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 18, 2026
$218.32 AUD
$261.98 AUD $218.32 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 0.5 - 40 tooth - 5 mm Module 0.5 - Polyacetal and Steel Gear
Pitch
Module 0.5
Teeth
40
Bore (dd)
5.00
mm
Direction
Right Hand
Worm Sets Gears - Pitch 0.5 - 40 - 5 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 40 to 1    Lead Angle: 1 Deg    Face Width (b): 5.00 mm    Hub Diameter: 15.00 mm    Centre Distance (A): 14.5 mm    Gear Length (l): 13 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 21.3 mm   
Part Number: WGS1-050-040-050-R-ACS (PK-10)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 18, 2026
$218.32 AUD
$261.98 AUD $218.32 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 0.5 - 50 tooth - 5 mm Module 0.5 - Polyacetal and Steel Gear
Pitch
Module 0.5
Teeth
50
Bore (dd)
5.00
mm
Direction
Right Hand
Ratio
50 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 0.5 - 50 - 5 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 5.00 mm    Hub Diameter: 20.00 mm    Centre Distance (A): 17 mm    Gear Length (l): 13 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 26.3 mm   
Part Number: WGS1-050-050-050-R-ACS (PK-10)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 18, 2026
$236.86 AUD
$284.24 AUD $236.86 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 0.5 - 50 tooth - 5 mm Module 0.5 - Polyacetal and Steel Gear
Pitch
Module 0.5
Teeth
50
Bore (dd)
5.00
mm
Direction
Right Hand
Worm Sets Gears - Pitch 0.5 - 50 - 5 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 50 to 1    Lead Angle: 1 Deg    Face Width (b): 5.00 mm    Hub Diameter: 20.00 mm    Centre Distance (A): 17 mm    Gear Length (l): 13 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 26.3 mm   
Part Number: WGS1-050-050-050-R-ACS (PK-10)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 18, 2026
$236.86 AUD
$284.24 AUD $236.86 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 0.5 - 60 tooth - 5 mm Module 0.5 - Polyacetal and Steel Gear
Pitch
Module 0.5
Teeth
60
Bore (dd)
5.00
mm
Direction
Right Hand
Ratio
60 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 0.5 - 60 - 5 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 5.00 mm    Hub Diameter: 25.00 mm    Centre Distance (A): 19.5 mm    Gear Length (l): 13 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 31.4 mm   
Part Number: WGS1-050-060-050-R-ACS (PK-5)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 18, 2026
$132.59 AUD
$159.11 AUD $132.59 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 0.5 - 60 tooth - 5 mm Module 0.5 - Polyacetal and Steel Gear
Pitch
Module 0.5
Teeth
60
Bore (dd)
5.00
mm
Direction
Right Hand
Worm Sets Gears - Pitch 0.5 - 60 - 5 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 60 to 1    Lead Angle: 1 Deg    Face Width (b): 5.00 mm    Hub Diameter: 25.00 mm    Centre Distance (A): 19.5 mm    Gear Length (l): 13 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 31.4 mm   
Part Number: WGS1-050-060-050-R-ACS (PK-5)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 18, 2026
$132.59 AUD
$159.11 AUD $132.59 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.