Gears - Spur - Standard - Module 0.5 - Steel

Gears -> Spur -> Standard -> Module 0.5 -> Steel

There is only 1 product in the sub-categories of Gears - Spur - Standard - Module 0.5 - Steel. Browse the Gears - Spur - Standard - Module 0.5 - Steel products table.

Category Details

A selection of Steel Module 0.5 Standard Spur Gears. PCD in mm = No. of Teeth x 0.5. 20 Degree Pressure Angle.

  • The diameter increases by 0.5mm per tooth
  • Module 0.5. Approximately 1.57mm between the teeth.

Small Parts & Bearings

Additional resources:


A more comprehensive listing may be found in the Gears - Spur - Standard - Module 0.5 - Steel category on the MBA Minibearings main store.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Type Indicative
Image
Spur Gears - 20 tooth - 10x4 mm Hubbed - Carbon Steel Gear
Number of Teeth
20

Pitch Circle Diameter (PD)
10.00
mm

(Equiv. 0.394 in.)
Bore (d)
4.000
mm
+0.022 / -0.00 (H8)
(Equiv. 0.157 in.)
Outside Diameter (OD)
11.000
mm
Face Width (FW)
8.000
mm
Type
K Hub
Spur Gears - 20 tooth - 10x4 mm Hubbed - Carbon Steel Gear
Material: Carbon Steel    Hub Diameter (D1): 11.000 mm    Hub Projection (HL): 10.000 mm    Locking Method: Set Screws M3 (2x120 Deg)    Quality: ISO 8 - ( AGMA 9 )   
Part Number: G010K-020-M05-080-040-CG (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$42.32 AUD
$42.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
Spur Gears - 20 tooth - 10x4 mm Hubbed - Carbon Steel Gear
Number of Teeth
20

Pitch Circle Diameter (PD)
10.00
mm

(Equiv. 0.394 in.)
Bore (d)
4.000
mm
+0.022 / -0.00 (H8)
(Equiv. 0.157 in.)
Outside Diameter (OD)
11.000
mm
Spur Gears - 20 tooth - 10x4 mm Hubbed - Carbon Steel Gear
Material: Carbon Steel    Face Width (FW): 8.000 mm    Type: K Hub    Hub Diameter (D1): 11.000 mm    Hub Projection (HL): 10.000 mm    Locking Method: Set Screws M3 (2x120 Deg)    Quality: ISO 8 - ( AGMA 9 )   
Part Number: G010K-020-M05-080-040-CG (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$42.32 AUD
$42.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.