Bearings - Thrust Ball - Flat - Stainless Steel

Bearings -> Thrust Ball -> Flat -> Stainless Steel

There are 8 products in the sub-categories of Bearings - Thrust Ball - Flat - Stainless Steel. Browse the Bearings - Thrust Ball - Flat - Stainless Steel products table.

Category Details

A selection of Stainless Steel Flat Thrust Ball Bearings. 3 Piece Thrust Bearings Open Type with Flat Washers

  • Thrust ball bearings provide for axial loads. They are designed to handle forces that push or pull along the axis of a rotating shaft
  • Commonly used in automotive, electric motors, marine propulsion, pumps and compressors, aerospace applications, industrial machinery, and wind turbines.
  • An expanded range may be available on special order. Please enquire.
  • These bearings are designed so that when one ring turns, the other remains stationary.
  • Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races.
  • Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate.
  • Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Small Parts & Bearings

Additional resources:


A more comprehensive listing may be found in the Bearings - Thrust Ball - Flat - Stainless Steel category on the MBA Minibearings main store.
Shaft Diameter (d1) O.D. (D1) Thickness (T) Bore (d2) OD (D2) Dynamic Load Capacity Indicative
Image
Thrust Ball Bearings - 6x14x5 mm / 6 mm Flat - Stainless Steel 400 Series and Nylon Bearing
Shaft Diameter (d1)
6.000
mm
+ 0.07 / + 0.20
(Equiv. 0.236 in.)
O.D. (D1)
14.000
mm
- 0.040 / - 0.220
(Equiv. 0.551 in.)
Thickness (T)
5.000
mm
+ 0.020 / - 0.180
(Equiv. 0.197 in.)
Bore (d2)
6.000
mm
- 0.025 / - 0.202
OD (D2)
14.000
mm
- 0.025 / - 0.202
Dynamic Load Capacity
19
kgf
Thrust Ball Bearings - 6x14x5 mm / 6 mm Flat - Stainless Steel 400 Series and Nylon
Material: Stainless Steel 400 Series and Nylon    Cage Type: Moulded Nylon   
Part Number: T-0060-0140-F-S440-NY (Each)
10 Available Now | Further orders can be expected around Mon, Jul 13, 2026
$31.68 AUD
$31.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 10 available can be backordered.
Shaft Diameter (d1) O.D. (D1) Thickness (T) Bore (d2) Indicative
Image
Thrust Ball Bearings - 6x14x5 mm / 6 mm Flat - Stainless Steel 400 Series and Nylon Bearing
Shaft Diameter (d1)
6.000
mm
+ 0.07 / + 0.20
(Equiv. 0.236 in.)
O.D. (D1)
14.000
mm
- 0.040 / - 0.220
(Equiv. 0.551 in.)
Thickness (T)
5.000
mm
+ 0.020 / - 0.180
(Equiv. 0.197 in.)
Bore (d2)
6.000
mm
- 0.025 / - 0.202
Thrust Ball Bearings - 6x14x5 mm / 6 mm Flat - Stainless Steel 400 Series and Nylon
Material: Stainless Steel 400 Series and Nylon    OD (D2): 14.000 mm - 0.025 / - 0.202    Dynamic Load Capacity: 19 kgf    Cage Type: Moulded Nylon   
Part Number: T-0060-0140-F-S440-NY (Each)
10 Available Now | Further orders can be expected around Mon, Jul 13, 2026
$31.68 AUD
$31.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

10 Available Now. Backorder if more than 10.
Thrust Ball Bearings - 6.35x14.288x4.763 mm / 6.35 mm Flat - Stainless Steel 400 Series and Nylon Bearing
Shaft Diameter (d1)
6.350
mm
+ 0.076 / + 0.203
(Equiv. 0.25 in.)
O.D. (D1)
14.288
mm
- 0.013 / - 0.208
(Equiv. 0.563 in.)
Thickness (T)
4.763
mm
+ 0.076 / + 0.215
(Equiv. 0.188 in.)
Bore (d2)
6.350
mm
- 0.025 / - 0.202
OD (D2)
14.288
mm
- 0.025 / - 0.202
Dynamic Load Capacity
20
kgf
Thrust Ball Bearings - 6.35x14.288x4.763 mm / 6.35 mm Flat - Stainless Steel 400 Series and Nylon
Material: Stainless Steel 400 Series and Nylon    Cage Type: Moulded Nylon   
Part Number: T-0064-0141-F-S440-NY (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$37.05 AUD
$37.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thrust Ball Bearings - 6.35x14.288x4.763 mm / 6.35 mm Flat - Stainless Steel 400 Series and Nylon Bearing
Shaft Diameter (d1)
6.350
mm
+ 0.076 / + 0.203
(Equiv. 0.25 in.)
O.D. (D1)
14.288
mm
- 0.013 / - 0.208
(Equiv. 0.563 in.)
Thickness (T)
4.763
mm
+ 0.076 / + 0.215
(Equiv. 0.188 in.)
Bore (d2)
6.350
mm
- 0.025 / - 0.202
Thrust Ball Bearings - 6.35x14.288x4.763 mm / 6.35 mm Flat - Stainless Steel 400 Series and Nylon
Material: Stainless Steel 400 Series and Nylon    OD (D2): 14.288 mm - 0.025 / - 0.202    Dynamic Load Capacity: 20 kgf    Cage Type: Moulded Nylon   
Part Number: T-0064-0141-F-S440-NY (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$37.05 AUD
$37.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thrust Ball Bearings - 8x16x5 mm Flat - Stainless Steel 400 Series Bearing
Shaft Diameter (d1)
8.000
mm
O.D. (D1)
16.000
mm
Thickness (T)
5.000
mm
OD (D2)
16.000
mm
Thrust Ball Bearings - 8x16x5 mm Flat - Stainless Steel 400 Series
Material: Stainless Steel 400 Series    Cage Type: Stainless Steel   
Part Number: T-0080-0160-F-S440 (Each)
24 Available Now | Item Discontinued - Up to 24 may be ordered online. No backorders. Please contact us if you need a larger quantity
$5.59 AUD
$12.74 AUD $5.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

24 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Thrust Ball Bearings - 8x16x5 mm Flat - Stainless Steel 400 Series Bearing
Shaft Diameter (d1)
8.000
mm
O.D. (D1)
16.000
mm
Thickness (T)
5.000
mm
Thrust Ball Bearings - 8x16x5 mm Flat - Stainless Steel 400 Series
Material: Stainless Steel 400 Series    OD (D2): 16.000 mm    Cage Type: Stainless Steel   
Part Number: T-0080-0160-F-S440 (Each)
24 Available Now | Item Discontinued - Up to 24 may be ordered online. No backorders. Please contact us if you need a larger quantity
$5.59 AUD
$12.74 AUD $5.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

24 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Thrust Ball Bearings - 8x16x5 mm / 8 mm Flat - Stainless Steel 400 Series and Nylon Bearing
Shaft Diameter (d1)
8.000
mm
+ 0.08 / + 0.20
(Equiv. 0.315 in.)
O.D. (D1)
16.000
mm
- 0.040 / - 0.220
(Equiv. 0.63 in.)
Thickness (T)
5.000
mm
+ 0.020 / - 0.180
(Equiv. 0.197 in.)
Bore (d2)
8.000
mm
- 0.025 / - 0.202
OD (D2)
16.000
mm
- 0.025 / - 0.202
Dynamic Load Capacity
22
kgf
Thrust Ball Bearings - 8x16x5 mm / 8 mm Flat - Stainless Steel 400 Series and Nylon
Material: Stainless Steel 400 Series and Nylon    Cage Type: Moulded Nylon   
Part Number: T-0080-0160-F-S440-NY (Each)
3 Available Now | Further orders can be expected around Sat, Jun 27, 2026
$7.50 AUD
$13.47 AUD $7.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 3 available can be backordered.
Thrust Ball Bearings - 8x16x5 mm / 8 mm Flat - Stainless Steel 400 Series and Nylon Bearing
Shaft Diameter (d1)
8.000
mm
+ 0.08 / + 0.20
(Equiv. 0.315 in.)
O.D. (D1)
16.000
mm
- 0.040 / - 0.220
(Equiv. 0.63 in.)
Thickness (T)
5.000
mm
+ 0.020 / - 0.180
(Equiv. 0.197 in.)
Bore (d2)
8.000
mm
- 0.025 / - 0.202
Thrust Ball Bearings - 8x16x5 mm / 8 mm Flat - Stainless Steel 400 Series and Nylon
Material: Stainless Steel 400 Series and Nylon    OD (D2): 16.000 mm - 0.025 / - 0.202    Dynamic Load Capacity: 22 kgf    Cage Type: Moulded Nylon   
Part Number: T-0080-0160-F-S440-NY (Each)
3 Available Now | Further orders can be expected around Sat, Jun 27, 2026
$7.50 AUD
$13.47 AUD $7.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

3 Available Now. Backorder if more than 3.
Thrust Ball Bearings - 9.525x20.638x6.35 mm / 9.525 mm Flat - Stainless Steel 400 Series and Nylon Bearing
Shaft Diameter (d1)
9.525
mm
+ 0.076 / + 0.203
(Equiv. 0.375 in.)
O.D. (D1)
20.638
mm
- 0.013 / - 0.208
(Equiv. 0.813 in.)
Thickness (T)
6.350
mm
+ 0.076 / - 0.127
(Equiv. 0.25 in.)
Bore (d2)
9.525
mm
- 0.025 / - 0.202
OD (D2)
20.638
mm
- 0.025 / - 0.202
Dynamic Load Capacity
25
kgf
Thrust Ball Bearings - 9.525x20.638x6.35 mm / 9.525 mm Flat - Stainless Steel 400 Series and Nylon
Material: Stainless Steel 400 Series and Nylon    Cage Type: Moulded Nylon   
Part Number: T-0095-0204-F-S440-NY (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$11.68 AUD
$14.02 AUD $11.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thrust Ball Bearings - 9.525x20.638x6.35 mm / 9.525 mm Flat - Stainless Steel 400 Series and Nylon Bearing
Shaft Diameter (d1)
9.525
mm
+ 0.076 / + 0.203
(Equiv. 0.375 in.)
O.D. (D1)
20.638
mm
- 0.013 / - 0.208
(Equiv. 0.813 in.)
Thickness (T)
6.350
mm
+ 0.076 / - 0.127
(Equiv. 0.25 in.)
Bore (d2)
9.525
mm
- 0.025 / - 0.202
Thrust Ball Bearings - 9.525x20.638x6.35 mm / 9.525 mm Flat - Stainless Steel 400 Series and Nylon
Material: Stainless Steel 400 Series and Nylon    OD (D2): 20.638 mm - 0.025 / - 0.202    Dynamic Load Capacity: 25 kgf    Cage Type: Moulded Nylon   
Part Number: T-0095-0204-F-S440-NY (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$11.68 AUD
$14.02 AUD $11.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thrust Ball Bearings - 14.288x25.4x6.35 mm / 14.288 mm Flat - Stainless Steel 400 Series and Nylon Bearing
Shaft Diameter (d1)
14.288
mm
+ 0.089 / + 0.216
(Equiv. 0.563 in.)
O.D. (D1)
25.400
mm
- 0.013 / - 0.208
(Equiv. 1 in.)
Thickness (T)
6.350
mm
+ 0.076 / - 0.127
(Equiv. 0.25 in.)
Bore (d2)
14.288
mm
- 0.025 / - 0.202
OD (D2)
25.400
mm
- 0.025 / - 0.202
Dynamic Load Capacity
37
kgf
Thrust Ball Bearings - 14.288x25.4x6.35 mm / 14.288 mm Flat - Stainless Steel 400 Series and Nylon
Material: Stainless Steel 400 Series and Nylon    Cage Type: Moulded Nylon   
Part Number: T-0143-0252-F-S440-NY (Each)
2 Available Now | Further orders can be expected around Sat, Jun 27, 2026
$20.68 AUD
$20.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 2 available can be backordered.
Thrust Ball Bearings - 14.288x25.4x6.35 mm / 14.288 mm Flat - Stainless Steel 400 Series and Nylon Bearing
Shaft Diameter (d1)
14.288
mm
+ 0.089 / + 0.216
(Equiv. 0.563 in.)
O.D. (D1)
25.400
mm
- 0.013 / - 0.208
(Equiv. 1 in.)
Thickness (T)
6.350
mm
+ 0.076 / - 0.127
(Equiv. 0.25 in.)
Bore (d2)
14.288
mm
- 0.025 / - 0.202
Thrust Ball Bearings - 14.288x25.4x6.35 mm / 14.288 mm Flat - Stainless Steel 400 Series and Nylon
Material: Stainless Steel 400 Series and Nylon    OD (D2): 25.400 mm - 0.025 / - 0.202    Dynamic Load Capacity: 37 kgf    Cage Type: Moulded Nylon   
Part Number: T-0143-0252-F-S440-NY (Each)
2 Available Now | Further orders can be expected around Sat, Jun 27, 2026
$20.68 AUD
$20.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Thrust Ball Bearings - 19.05x31.75x8.731 mm / 19.05 mm Flat - Stainless Steel 400 Series and Nylon Bearing
Shaft Diameter (d1)
19.050
mm
+ 0.076 / + 0.263
(Equiv. 0.75 in.)
O.D. (D1)
31.750
mm
- 0.013 / - 0.208
(Equiv. 1.25 in.)
Thickness (T)
8.731
mm
+ 0.076 / - 0.127
(Equiv. 0.344 in.)
Bore (d2)
19.050
mm
- 0.025 / - 0.202
OD (D2)
31.750
mm
- 0.025 / - 0.202
Dynamic Load Capacity
54
kgf
Thrust Ball Bearings - 19.05x31.75x8.731 mm / 19.05 mm Flat - Stainless Steel 400 Series and Nylon
Material: Stainless Steel 400 Series and Nylon    Cage Type: Moulded Nylon   
Part Number: T-0191-0315-F-S440-NY (Each)
2 Available Now | Further orders can be expected around Sat, Jun 27, 2026
$15.50 AUD
$28.29 AUD $15.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 2 available can be backordered.
Thrust Ball Bearings - 19.05x31.75x8.731 mm / 19.05 mm Flat - Stainless Steel 400 Series and Nylon Bearing
Shaft Diameter (d1)
19.050
mm
+ 0.076 / + 0.263
(Equiv. 0.75 in.)
O.D. (D1)
31.750
mm
- 0.013 / - 0.208
(Equiv. 1.25 in.)
Thickness (T)
8.731
mm
+ 0.076 / - 0.127
(Equiv. 0.344 in.)
Bore (d2)
19.050
mm
- 0.025 / - 0.202
Thrust Ball Bearings - 19.05x31.75x8.731 mm / 19.05 mm Flat - Stainless Steel 400 Series and Nylon
Material: Stainless Steel 400 Series and Nylon    OD (D2): 31.750 mm - 0.025 / - 0.202    Dynamic Load Capacity: 54 kgf    Cage Type: Moulded Nylon   
Part Number: T-0191-0315-F-S440-NY (Each)
2 Available Now | Further orders can be expected around Sat, Jun 27, 2026
$15.50 AUD
$28.29 AUD $15.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Thrust Ball Bearings - 28.575x44.45x11.113 mm / 28.575 mm Flat - Stainless Steel 400 Series and Nylon Bearing
Shaft Diameter (d1)
28.575
mm
+ 0.076 / + 0.263
(Equiv. 1.125 in.)
O.D. (D1)
44.450
mm
- 0.013 / - 0.208
(Equiv. 1.75 in.)
Thickness (T)
11.113
mm
+ 0.360 / - 0.240
(Equiv. 0.438 in.)
Bore (d2)
28.575
mm
- 0.025 / - 0.202
OD (D2)
44.450
mm
- 0.025 / - 0.202
Dynamic Load Capacity
99
kgf
Thrust Ball Bearings - 28.575x44.45x11.113 mm / 28.575 mm Flat - Stainless Steel 400 Series and Nylon
Material: Stainless Steel 400 Series and Nylon    Cage Type: Moulded Nylon   
Part Number: T-0286-0441-F-S440-NY (Each)
2 Available Now | Further orders can be expected around Sat, Jun 27, 2026
$60.59 AUD
$60.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 2 available can be backordered.
Thrust Ball Bearings - 28.575x44.45x11.113 mm / 28.575 mm Flat - Stainless Steel 400 Series and Nylon Bearing
Shaft Diameter (d1)
28.575
mm
+ 0.076 / + 0.263
(Equiv. 1.125 in.)
O.D. (D1)
44.450
mm
- 0.013 / - 0.208
(Equiv. 1.75 in.)
Thickness (T)
11.113
mm
+ 0.360 / - 0.240
(Equiv. 0.438 in.)
Bore (d2)
28.575
mm
- 0.025 / - 0.202
Thrust Ball Bearings - 28.575x44.45x11.113 mm / 28.575 mm Flat - Stainless Steel 400 Series and Nylon
Material: Stainless Steel 400 Series and Nylon    OD (D2): 44.450 mm - 0.025 / - 0.202    Dynamic Load Capacity: 99 kgf    Cage Type: Moulded Nylon   
Part Number: T-0286-0441-F-S440-NY (Each)
2 Available Now | Further orders can be expected around Sat, Jun 27, 2026
$60.59 AUD
$60.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.