Springs - Torsion - Right Hand Wound

Springs -> Torsion -> Right Hand Wound

There are 7 products in the sub-categories of Springs - Torsion - Right Hand Wound. Browse the Springs - Torsion - Right Hand Wound products table.

Category Details

A selection of Right Hand Wound Torsion Springs. Right hand winding springs are wound in a clockwise direction, and has its end of wire on the right side.

  • Mechanical spring that stores mechanical energy when it is twisted, and then releases this energy as torque (rotational force) when it unwinds.
  • It works by applying a rotational force or maintaining pressure between surfaces when its ends are twisted in opposite directions.
  • Load should be applied at about half the leg length. Free Deflection denotes the angle of the legs in the unloaded starting position. An expanded range may be available on special order. Please enquire.

Small Parts & Bearings

Additional resources:


A more comprehensive listing may be found in the Springs - Torsion - Right Hand Wound category on the MBA Minibearings main store.
Mandrel Size (MS) Length of Leg (E) Wire Diameter Spring Outside Diameter (D0) Minimum Axial Space Torque When Parallel Indicative
Image
Mandrel Size (MS)
1.70
mm

(Equiv. 0.067 in.)
Length of Leg (E)
9.5
mm

(Equiv. 0.374 in.)
Wire Diameter
0.30
mm

(Equiv. 0.012 in.)
Spring Outside Diameter (D0)
2.77
mm
Minimum Axial Space
2.18
mm
Torque When Parallel
5.3
N.mm
+/- 10 Perc.
Torsion Springs - 1.7x9.5x0.3 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 180 Deg.    Coils: 9   
Part Number: TS-017R-095-030-180-S2 (Each)
Torsion Springs - 1.7x9.5x0.3 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
2 Available Now | Further orders can be expected around Wed, Jan 14, 2026
$15.14 AUD
$18.16 AUD $15.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Mandrel Size (MS) Length of Leg (E) Wire Diameter Spring Outside Diameter (D0) Indicative
Image
Mandrel Size (MS)
1.70
mm

(Equiv. 0.067 in.)
Length of Leg (E)
9.5
mm

(Equiv. 0.374 in.)
Wire Diameter
0.30
mm

(Equiv. 0.012 in.)
Spring Outside Diameter (D0)
2.77
mm
Torsion Springs - 1.7x9.5x0.3 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 2.18 mm    Torque When Parallel: 5.3 N.mm +/- 10 Perc.   Free Deflection: 180 Deg.    Coils: 9   
Part Number: TS-017R-095-030-180-S2 (Each)
Torsion Springs - 1.7x9.5x0.3 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
2 Available Now | Further orders can be expected around Wed, Jan 14, 2026
$15.14 AUD
$18.16 AUD $15.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Mandrel Size (MS)
2.36
mm

(Equiv. 0.093 in.)
Length of Leg (E)
12.7
mm

(Equiv. 0.5 in.)
Wire Diameter
0.43
mm

(Equiv. 0.017 in.)
Spring Outside Diameter (D0)
4.06
mm
Minimum Axial Space
2.06
mm
Torque When Parallel
13.2
N.mm
+/- 10 Perc.
Torsion Springs - 2.36x12.7x0.43 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 90 Deg.    Coils: 3.25   
Part Number: TS-024R-127-043-090-S2 (Each)
Torsion Springs - 2.36x12.7x0.43 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
2 Available Now | Further orders can be expected around Wed, Jan 14, 2026
$14.05 AUD
$16.85 AUD $14.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Mandrel Size (MS)
2.36
mm

(Equiv. 0.093 in.)
Length of Leg (E)
12.7
mm

(Equiv. 0.5 in.)
Wire Diameter
0.43
mm

(Equiv. 0.017 in.)
Spring Outside Diameter (D0)
4.06
mm
Torsion Springs - 2.36x12.7x0.43 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 2.06 mm    Torque When Parallel: 13.2 N.mm +/- 10 Perc.   Free Deflection: 90 Deg.    Coils: 3.25   
Part Number: TS-024R-127-043-090-S2 (Each)
Torsion Springs - 2.36x12.7x0.43 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
2 Available Now | Further orders can be expected around Wed, Jan 14, 2026
$14.05 AUD
$16.85 AUD $14.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Mandrel Size (MS)
5.94
mm

(Equiv. 0.234 in.)
Length of Leg (E)
50.8
mm

(Equiv. 2 in.)
Wire Diameter
1.30
mm

(Equiv. 0.051 in.)
Spring Outside Diameter (D0)
10.363
mm
Minimum Axial Space
7.442
mm
Torque When Parallel
326.4
N.mm
Torsion Springs - 5.94x50.8x1.3 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 90 Deg.    Coils: 3.25   
Part Number: TS-059R-508-130-090-S2 (Each)
Torsion Springs - 5.94x50.8x1.3 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
2 Available Now | Further orders can be expected around Wed, Jan 14, 2026
$25.23 AUD
$25.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Mandrel Size (MS)
5.94
mm

(Equiv. 0.234 in.)
Length of Leg (E)
50.8
mm

(Equiv. 2 in.)
Wire Diameter
1.30
mm

(Equiv. 0.051 in.)
Spring Outside Diameter (D0)
10.363
mm
Torsion Springs - 5.94x50.8x1.3 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 7.442 mm    Torque When Parallel: 326.4 N.mm    Free Deflection: 90 Deg.    Coils: 3.25   
Part Number: TS-059R-508-130-090-S2 (Each)
Torsion Springs - 5.94x50.8x1.3 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
2 Available Now | Further orders can be expected around Wed, Jan 14, 2026
$25.23 AUD
$25.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Mandrel Size (MS)
6
mm

(Equiv. 0.236 in.)
Length of Leg (E)
60
mm

(Equiv. 2.362 in.)
Wire Diameter
0.800
mm

(Equiv. 0.031 in.)
Torque When Parallel
480.0
N.mm
Torsion Springs - 6x60x0.8 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 135 Deg.    Coils: 3   
Part Number: TS-060R-600-080-135-S4 (PK-5)
Torsion Springs - 6x60x0.8 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
5 units (25 pcs) Available Now | Further orders can be expected around Mon, Jan 12, 2026
$6.41 AUD
$6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

5 units (25 pcs) Available Now. Backorder if more than 5.
Mandrel Size (MS)
6
mm

(Equiv. 0.236 in.)
Length of Leg (E)
60
mm

(Equiv. 2.362 in.)
Wire Diameter
0.800
mm

(Equiv. 0.031 in.)
Torsion Springs - 6x60x0.8 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 480.0 N.mm    Free Deflection: 135 Deg.    Coils: 3   
Part Number: TS-060R-600-080-135-S4 (PK-5)
Torsion Springs - 6x60x0.8 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
5 units (25 pcs) Available Now | Further orders can be expected around Mon, Jan 12, 2026
$6.41 AUD
$6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

5 units (25 pcs) Available Now. Backorder if more than 5.
Mandrel Size (MS)
6
mm

(Equiv. 0.236 in.)
Length of Leg (E)
60
mm

(Equiv. 2.362 in.)
Wire Diameter
0.800
mm

(Equiv. 0.031 in.)
Torque When Parallel
499.2
N.mm
Torsion Springs - 6x60x0.8 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 180 Deg.    Coils: 3   
Part Number: TS-060R-600-080-180-S4 (PK-5)
Torsion Springs - 6x60x0.8 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
4 units (20 pcs) Available Now | Further orders can be expected around Mon, Jan 12, 2026
$6.41 AUD
$6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

4 units (20 pcs) Available Now. Backorder if more than 4.
Mandrel Size (MS)
6
mm

(Equiv. 0.236 in.)
Length of Leg (E)
60
mm

(Equiv. 2.362 in.)
Wire Diameter
0.800
mm

(Equiv. 0.031 in.)
Torsion Springs - 6x60x0.8 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 499.2 N.mm    Free Deflection: 180 Deg.    Coils: 3   
Part Number: TS-060R-600-080-180-S4 (PK-5)
Torsion Springs - 6x60x0.8 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
4 units (20 pcs) Available Now | Further orders can be expected around Mon, Jan 12, 2026
$6.41 AUD
$6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

4 units (20 pcs) Available Now. Backorder if more than 4.
Mandrel Size (MS)
8.71
mm

(Equiv. 0.343 in.)
Length of Leg (E)
50.8
mm

(Equiv. 2 in.)
Wire Diameter
1.60
mm

(Equiv. 0.063 in.)
Spring Outside Diameter (D0)
14.224
mm
Minimum Axial Space
9.195
mm
Torque When Parallel
576.0
N.mm
Torsion Springs - 8.71x50.8x1.6 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 90 Deg.    Coils: 3.25   
Part Number: TS-087R-508-160-090-S2 (Each)
Torsion Springs - 8.71x50.8x1.6 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
10 Available Now | Further orders can be expected around Wed, Jan 14, 2026
$31.86 AUD
$38.24 AUD $31.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

10 Available Now. Backorder if more than 10.
Mandrel Size (MS)
8.71
mm

(Equiv. 0.343 in.)
Length of Leg (E)
50.8
mm

(Equiv. 2 in.)
Wire Diameter
1.60
mm

(Equiv. 0.063 in.)
Spring Outside Diameter (D0)
14.224
mm
Torsion Springs - 8.71x50.8x1.6 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 9.195 mm    Torque When Parallel: 576.0 N.mm    Free Deflection: 90 Deg.    Coils: 3.25   
Part Number: TS-087R-508-160-090-S2 (Each)
Torsion Springs - 8.71x50.8x1.6 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
10 Available Now | Further orders can be expected around Wed, Jan 14, 2026
$31.86 AUD
$38.24 AUD $31.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

10 Available Now. Backorder if more than 10.
Mandrel Size (MS)
10.31
mm

(Equiv. 0.406 in.)
Length of Leg (E)
50.8
mm

(Equiv. 2 in.)
Wire Diameter
1.98
mm

(Equiv. 0.078 in.)
Spring Outside Diameter (D0)
17.450
mm
Minimum Axial Space
11.430
mm
Torque When Parallel
1094.4
N.mm
Torsion Springs - 10.31x50.8x1.98 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 90 Deg.    Coils: 4.25   
Part Number: TS-103R-508-198-090-S2 (Each)
Torsion Springs - 10.31x50.8x1.98 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
2 Available Now | Further orders can be expected around Wed, Jan 14, 2026
$39.14 AUD
$39.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Mandrel Size (MS)
10.31
mm

(Equiv. 0.406 in.)
Length of Leg (E)
50.8
mm

(Equiv. 2 in.)
Wire Diameter
1.98
mm

(Equiv. 0.078 in.)
Spring Outside Diameter (D0)
17.450
mm
Torsion Springs - 10.31x50.8x1.98 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 11.430 mm    Torque When Parallel: 1094.4 N.mm    Free Deflection: 90 Deg.    Coils: 4.25   
Part Number: TS-103R-508-198-090-S2 (Each)
Torsion Springs - 10.31x50.8x1.98 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
2 Available Now | Further orders can be expected around Wed, Jan 14, 2026
$39.14 AUD
$39.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.