Shafting - Pre Drilled and Tapped

8 Products in this selection

This is a combined category of products from Pre Drilled and Tapped Shafting. Use the filters in the table below, or the category tree to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.

Additional resources:
Drill Rod
Diameter (D) Length (L) Material Thread Size Hole Pitch (P) Surface Finish Indicative
Image
12.700
mm
- 0.010 / - 0.030 		609.6
mm 		440C Case Hardened Stainless
 101.6
 0.30 um
Microns 		1105249 | 0R-0127-0610-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 12.7 mm x 609.6 mm
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0127-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 12.7 mm x 609.6 mm
Out of Stock | Backorder Now | Backorders for more can be expected around Fri, Feb 14, 2025
$339.14 AUD
$339.14 AUD
Each
View the product page first if you are unsure ->
Diameter (D) Length (L) Material Thread Size Indicative
Image
12.700
mm
- 0.010 / - 0.030 		609.6
mm 		440C Case Hardened Stainless
 1105249 | 0R-0127-0610-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 12.7 mm x 609.6 mm
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0127-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 12.7 mm x 609.6 mm
Out of Stock | Backorder Now | Backorders for more can be expected around Fri, Feb 14, 2025
$339.14 AUD
$339.14 AUD
Each
View the product page first if you are unsure.
15.875
mm
- 0.010 / - 0.030 		101.6
mm 		440C Case Hardened Stainless
 101.6
 0.30 um
Microns 		1112685 | 0R-0159-1829-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 15.875 mm x 101.6 mm
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 15.875 mm x 101.6 mm
Out of Stock | Backorder Now | Backorders for more can be expected around Fri, Feb 14, 2025
$1,893.32 AUD
$1,893.32 AUD
Each
View the product page first if you are unsure ->
15.875
mm
- 0.010 / - 0.030 		101.6
mm 		440C Case Hardened Stainless
 1112685 | 0R-0159-1829-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 15.875 mm x 101.6 mm
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 15.875 mm x 101.6 mm
Out of Stock | Backorder Now | Backorders for more can be expected around Fri, Feb 14, 2025
$1,893.32 AUD
$1,893.32 AUD
Each
View the product page first if you are unsure.
15.875
mm
- 0.010 / - 0.030 		609.6
mm 		440C Case Hardened Stainless
 101.6
 0.30 um
Microns 		1112851 | 0R-0159-0610-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 15.875 mm x 609.6 mm
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 15.875 mm x 609.6 mm
Out of Stock | Backorder Now | Backorders for more can be expected around Fri, Feb 14, 2025
$378.59 AUD
$378.59 AUD
Each
View the product page first if you are unsure ->
15.875
mm
- 0.010 / - 0.030 		609.6
mm 		440C Case Hardened Stainless
 1112851 | 0R-0159-0610-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 15.875 mm x 609.6 mm
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 15.875 mm x 609.6 mm
Out of Stock | Backorder Now | Backorders for more can be expected around Fri, Feb 14, 2025
$378.59 AUD
$378.59 AUD
Each
View the product page first if you are unsure.
19.050
mm
- 0.010 / - 0.030 		152.4
mm 		440C Case Hardened Stainless
 152.4
 0.30 um
Microns 		1122400 | 0R-0191-1829-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 19.05 mm x 152.4 mm
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 19.05 mm x 152.4 mm
Out of Stock | Backorder Now | Backorders for more can be expected around Fri, Feb 14, 2025
$1,969.32 AUD
$1,969.32 AUD
Each
View the product page first if you are unsure ->
19.050
mm
- 0.010 / - 0.030 		152.4
mm 		440C Case Hardened Stainless
 1122400 | 0R-0191-1829-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 19.05 mm x 152.4 mm
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 19.05 mm x 152.4 mm
Out of Stock | Backorder Now | Backorders for more can be expected around Fri, Feb 14, 2025
$1,969.32 AUD
$1,969.32 AUD
Each
View the product page first if you are unsure.
19.050
mm
- 0.010 / - 0.030 		610
mm 		440C Case Hardened Stainless
 152.4
 0.30 um
Microns 		1122544 | 0R-0191-0610-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 19.05 mm x 610 mm
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 19.05 mm x 610 mm
Out of Stock | Backorder Now | Backorders for more can be expected around Fri, Feb 14, 2025
$659.77 AUD
$659.77 AUD
Each
View the product page first if you are unsure ->
19.050
mm
- 0.010 / - 0.030 		610
mm 		440C Case Hardened Stainless
 1122544 | 0R-0191-0610-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 19.05 mm x 610 mm
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 19.05 mm x 610 mm
Out of Stock | Backorder Now | Backorders for more can be expected around Fri, Feb 14, 2025
$659.77 AUD
$659.77 AUD
Each
View the product page first if you are unsure.
25.400
mm
- 0.010 / - 0.030 		152.4
mm 		440C Case Hardened Stainless
 152.4
 0.30 um
Microns 		1136558 | 0R-0254-1829-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 25.4 mm x 152.4 mm
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4 mm x 152.4 mm
Out of Stock | Backorder Now | Backorders for more can be expected around Fri, Feb 14, 2025
$2,459.14 AUD
$2,459.14 AUD
Each
View the product page first if you are unsure ->
25.400
mm
- 0.010 / - 0.030 		152.4
mm 		440C Case Hardened Stainless
 1136558 | 0R-0254-1829-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 25.4 mm x 152.4 mm
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4 mm x 152.4 mm
Out of Stock | Backorder Now | Backorders for more can be expected around Fri, Feb 14, 2025
$2,459.14 AUD
$2,459.14 AUD
Each
View the product page first if you are unsure.
25.400
mm
- 0.010 / - 0.030 		610
mm 		440C Case Hardened Stainless
 152.4
 0.30 um
Microns 		1136663 | 0R-0254-0610-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 25.4 mm x 610 mm
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4 mm x 610 mm
Out of Stock | Backorder Now | Backorders for more can be expected around Fri, Feb 14, 2025
$847.86 AUD
$847.86 AUD
Each
View the product page first if you are unsure ->
25.400
mm
- 0.010 / - 0.030 		610
mm 		440C Case Hardened Stainless
 1136663 | 0R-0254-0610-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 25.4 mm x 610 mm
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4 mm x 610 mm
Out of Stock | Backorder Now | Backorders for more can be expected around Fri, Feb 14, 2025
$847.86 AUD
$847.86 AUD
Each
View the product page first if you are unsure.
25.400
mm
- 0.010 / - 0.030 		1219.2
mm 		440C Case Hardened Stainless
 152.4
 0.30 um
Microns 		1136697 | 0R-0254-1219-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 25.4 mm x 1219.2 mm
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1219-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4 mm x 1219.2 mm
Out of Stock | Backorder Now | Backorders for more can be expected around Fri, Feb 14, 2025
$1,668.77 AUD
$1,668.77 AUD
Each
View the product page first if you are unsure ->
25.400
mm
- 0.010 / - 0.030 		1219.2
mm 		440C Case Hardened Stainless
 1136697 | 0R-0254-1219-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 25.4 mm x 1219.2 mm
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1219-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4 mm x 1219.2 mm
Out of Stock | Backorder Now | Backorders for more can be expected around Fri, Feb 14, 2025
$1,668.77 AUD
$1,668.77 AUD
Each
View the product page first if you are unsure.