Pins - Hammer Drive - Round Head Stainless Steel

Pins -> Hammer Drive -> Round Head Stainless Steel

There are 19 products in the sub-categories of Pins - Hammer Drive - Round Head Stainless Steel. Browse the Pins - Hammer Drive - Round Head Stainless Steel products table.

Category Details

A selection of Round Head Stainless Steel Hammer Drive Pins. Used to replace screws where the need to remove the pin is unlikely.

  • Stainless Steel 304 Grade
  • Simple, low cost assembly.
  • Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly.
  • Drive studs do not require lock washers to prevent back-out.
  • Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Small Parts & Bearings

Additional resources:


A more comprehensive listing may be found in the Pins - Hammer Drive - Round Head Stainless Steel category on the MBA Minibearings main store.
Min Hole Diameter Approx. Length (l) Max Hole Dia. Approx Pin Diameter (d1) Max Head Diameter (d2) Max Head Thickness (h) Indicative
Image
Hammer Drive Pins - 1.24x3.2x1.32 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
1.24
mm

(Equiv. 0.049 in.)
Approx. Length (l)
3.2
mm

(Equiv. 0.126 in.)
Max Hole Dia.
1.32
mm

(Equiv. 0.052 in.)
Approx Pin Diameter (d1)
1.52
mm
Max Head Diameter (d2)
2.51
mm
Max Head Thickness (h)
0.86
mm
Hammer Drive Pins - 1.24x3.2x1.32 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.2 mm   
Part Number: HDP012-03R-S4 (PK-100)
6 units (600 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$29.32 AUD
$123.84 AUD $29.32 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 6 available can be backordered.
Min Hole Diameter Approx. Length (l) Max Hole Dia. Approx Pin Diameter (d1) Indicative
Image
Hammer Drive Pins - 1.24x3.2x1.32 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
1.24
mm

(Equiv. 0.049 in.)
Approx. Length (l)
3.2
mm

(Equiv. 0.126 in.)
Max Hole Dia.
1.32
mm

(Equiv. 0.052 in.)
Approx Pin Diameter (d1)
1.52
mm
Hammer Drive Pins - 1.24x3.2x1.32 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 2.51 mm    Max Head Thickness (h): 0.86 mm    Nom. Pilot Length: 1.2 mm   
Part Number: HDP012-03R-S4 (PK-100)
6 units (600 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$29.32 AUD
$123.84 AUD $29.32 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

6 units (600 pcs) Available Now. Backorder if more than 6.
Hammer Drive Pins - 1.24x4.8x1.32 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
1.24
mm

(Equiv. 0.049 in.)
Approx. Length (l)
4.8
mm

(Equiv. 0.189 in.)
Max Hole Dia.
1.32
mm

(Equiv. 0.052 in.)
Approx Pin Diameter (d1)
1.52
mm
Max Head Diameter (d2)
2.51
mm
Max Head Thickness (h)
0.86
mm
Hammer Drive Pins - 1.24x4.8x1.32 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.2 mm   
Part Number: HDP012-05R-S4 (PK-10)
43 units (430 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$2.14 AUD
$10.51 AUD $2.14 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 43 available can be backordered.
Hammer Drive Pins - 1.24x4.8x1.32 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
1.24
mm

(Equiv. 0.049 in.)
Approx. Length (l)
4.8
mm

(Equiv. 0.189 in.)
Max Hole Dia.
1.32
mm

(Equiv. 0.052 in.)
Approx Pin Diameter (d1)
1.52
mm
Hammer Drive Pins - 1.24x4.8x1.32 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 2.51 mm    Max Head Thickness (h): 0.86 mm    Nom. Pilot Length: 1.2 mm   
Part Number: HDP012-05R-S4 (PK-10)
43 units (430 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$2.14 AUD
$10.51 AUD $2.14 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

43 units (430 pcs) Available Now. Backorder if more than 43.
Hammer Drive Pins - 1.52x6.3x1.6 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
1.52
mm

(Equiv. 0.06 in.)
Approx. Length (l)
6.3
mm

(Equiv. 0.248 in.)
Max Hole Dia.
1.60
mm

(Equiv. 0.063 in.)
Approx Pin Diameter (d1)
1.70
mm
Max Head Diameter (d2)
2.51
mm
Max Head Thickness (h)
0.86
mm
Hammer Drive Pins - 1.52x6.3x1.6 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.2 mm   
Part Number: HDP015-06R-S4 (PK-5)
120 units (600 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$5.86 AUD
$5.86 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 120 available can be backordered.
Hammer Drive Pins - 1.52x6.3x1.6 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
1.52
mm

(Equiv. 0.06 in.)
Approx. Length (l)
6.3
mm

(Equiv. 0.248 in.)
Max Hole Dia.
1.60
mm

(Equiv. 0.063 in.)
Approx Pin Diameter (d1)
1.70
mm
Hammer Drive Pins - 1.52x6.3x1.6 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 2.51 mm    Max Head Thickness (h): 0.86 mm    Nom. Pilot Length: 1.2 mm   
Part Number: HDP015-06R-S4 (PK-5)
120 units (600 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$5.86 AUD
$5.86 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

120 units (600 pcs) Available Now. Backorder if more than 120.
Hammer Drive Pins - 1.52x9.5x1.6 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
1.52
mm

(Equiv. 0.06 in.)
Approx. Length (l)
9.5
mm

(Equiv. 0.374 in.)
Max Hole Dia.
1.60
mm

(Equiv. 0.063 in.)
Approx Pin Diameter (d1)
1.70
mm
Max Head Diameter (d2)
2.51
mm
Max Head Thickness (h)
0.86
mm
Hammer Drive Pins - 1.52x9.5x1.6 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.6 mm   
Part Number: HDP015-09R-S4 (PK-20)
8 units (160 pcs) Available Now | Further orders can be expected around Tue, Feb 03, 2026
$12.05 AUD
$12.05 AUD
Priced, Stocked and Sold Per 20 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 8 available can be backordered.
Hammer Drive Pins - 1.52x9.5x1.6 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
1.52
mm

(Equiv. 0.06 in.)
Approx. Length (l)
9.5
mm

(Equiv. 0.374 in.)
Max Hole Dia.
1.60
mm

(Equiv. 0.063 in.)
Approx Pin Diameter (d1)
1.70
mm
Hammer Drive Pins - 1.52x9.5x1.6 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 2.51 mm    Max Head Thickness (h): 0.86 mm    Nom. Pilot Length: 1.6 mm   
Part Number: HDP015-09R-S4 (PK-20)
8 units (160 pcs) Available Now | Further orders can be expected around Tue, Feb 03, 2026
$12.05 AUD
$12.05 AUD
Priced, Stocked and Sold Per 20 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

8 units (160 pcs) Available Now. Backorder if more than 8.
Hammer Drive Pins - 2.1x3.2x2.18 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.10
mm

(Equiv. 0.083 in.)
Approx. Length (l)
3.2
mm

(Equiv. 0.126 in.)
Max Hole Dia.
2.18
mm

(Equiv. 0.086 in.)
Approx Pin Diameter (d1)
2.54
mm
Max Head Diameter (d2)
4.10
mm
Max Head Thickness (h)
1.75
mm
Hammer Drive Pins - 2.1x3.2x2.18 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.2 mm   
Part Number: HDP021-03R-S4 (PK-5)
19 units (95 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$3.77 AUD
$3.77 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 19 available can be backordered.
Hammer Drive Pins - 2.1x3.2x2.18 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.10
mm

(Equiv. 0.083 in.)
Approx. Length (l)
3.2
mm

(Equiv. 0.126 in.)
Max Hole Dia.
2.18
mm

(Equiv. 0.086 in.)
Approx Pin Diameter (d1)
2.54
mm
Hammer Drive Pins - 2.1x3.2x2.18 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 4.10 mm    Max Head Thickness (h): 1.75 mm    Nom. Pilot Length: 1.2 mm   
Part Number: HDP021-03R-S4 (PK-5)
19 units (95 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$3.77 AUD
$3.77 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

19 units (95 pcs) Available Now. Backorder if more than 19.
Hammer Drive Pins - 2.1x4.8x2.18 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.10
mm

(Equiv. 0.083 in.)
Approx. Length (l)
4.8
mm

(Equiv. 0.189 in.)
Max Hole Dia.
2.18
mm

(Equiv. 0.086 in.)
Approx Pin Diameter (d1)
2.54
mm
Max Head Diameter (d2)
4.10
mm
Max Head Thickness (h)
1.75
mm
Hammer Drive Pins - 2.1x4.8x2.18 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.2 mm   
Part Number: HDP021-05R-S4 (PK-5)
204 units (1020 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$1.05 AUD
$5.11 AUD $1.05 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 204 available can be backordered.
Hammer Drive Pins - 2.1x4.8x2.18 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.10
mm

(Equiv. 0.083 in.)
Approx. Length (l)
4.8
mm

(Equiv. 0.189 in.)
Max Hole Dia.
2.18
mm

(Equiv. 0.086 in.)
Approx Pin Diameter (d1)
2.54
mm
Hammer Drive Pins - 2.1x4.8x2.18 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 4.10 mm    Max Head Thickness (h): 1.75 mm    Nom. Pilot Length: 1.2 mm   
Part Number: HDP021-05R-S4 (PK-5)
204 units (1020 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$1.05 AUD
$5.11 AUD $1.05 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

204 units (1020 pcs) Available Now. Backorder if more than 204.
Hammer Drive Pins - 2.1x6.3x2.18 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.10
mm

(Equiv. 0.083 in.)
Approx. Length (l)
6.3
mm

(Equiv. 0.248 in.)
Max Hole Dia.
2.18
mm

(Equiv. 0.086 in.)
Approx Pin Diameter (d1)
2.54
mm
Max Head Diameter (d2)
4.10
mm
Max Head Thickness (h)
1.75
mm
Hammer Drive Pins - 2.1x6.3x2.18 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.2 mm   
Part Number: HDP021-06R-S4 (PK-5)
236 units (1180 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$1.05 AUD
$5.18 AUD $1.05 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 236 available can be backordered.
Hammer Drive Pins - 2.1x6.3x2.18 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.10
mm

(Equiv. 0.083 in.)
Approx. Length (l)
6.3
mm

(Equiv. 0.248 in.)
Max Hole Dia.
2.18
mm

(Equiv. 0.086 in.)
Approx Pin Diameter (d1)
2.54
mm
Hammer Drive Pins - 2.1x6.3x2.18 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 4.10 mm    Max Head Thickness (h): 1.75 mm    Nom. Pilot Length: 1.2 mm   
Part Number: HDP021-06R-S4 (PK-5)
236 units (1180 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$1.05 AUD
$5.18 AUD $1.05 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

236 units (1180 pcs) Available Now. Backorder if more than 236.
Hammer Drive Pins - 2.44x4.8x2.64 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.44
mm

(Equiv. 0.096 in.)
Approx. Length (l)
4.8
mm

(Equiv. 0.189 in.)
Max Hole Dia.
2.64
mm

(Equiv. 0.104 in.)
Approx Pin Diameter (d1)
2.95
mm
Max Head Diameter (d2)
5.36
mm
Max Head Thickness (h)
2.18
mm
Hammer Drive Pins - 2.44x4.8x2.64 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.2 mm   
Part Number: HDP024-05R-S4 (PK-5)
97 units (485 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$5.23 AUD
$5.23 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 97 available can be backordered.
Hammer Drive Pins - 2.44x4.8x2.64 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.44
mm

(Equiv. 0.096 in.)
Approx. Length (l)
4.8
mm

(Equiv. 0.189 in.)
Max Hole Dia.
2.64
mm

(Equiv. 0.104 in.)
Approx Pin Diameter (d1)
2.95
mm
Hammer Drive Pins - 2.44x4.8x2.64 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 5.36 mm    Max Head Thickness (h): 2.18 mm    Nom. Pilot Length: 1.2 mm   
Part Number: HDP024-05R-S4 (PK-5)
97 units (485 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$5.23 AUD
$5.23 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

97 units (485 pcs) Available Now. Backorder if more than 97.
Hammer Drive Pins - 2.44x6.3x2.64 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.44
mm

(Equiv. 0.096 in.)
Approx. Length (l)
6.3
mm

(Equiv. 0.248 in.)
Max Hole Dia.
2.64
mm

(Equiv. 0.104 in.)
Approx Pin Diameter (d1)
2.95
mm
Max Head Diameter (d2)
5.36
mm
Max Head Thickness (h)
2.18
mm
Hammer Drive Pins - 2.44x6.3x2.64 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.2 mm   
Part Number: HDP024-06R-S4 (PK-5)
131 units (655 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$1.05 AUD
$5.18 AUD $1.05 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 131 available can be backordered.
Hammer Drive Pins - 2.44x6.3x2.64 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.44
mm

(Equiv. 0.096 in.)
Approx. Length (l)
6.3
mm

(Equiv. 0.248 in.)
Max Hole Dia.
2.64
mm

(Equiv. 0.104 in.)
Approx Pin Diameter (d1)
2.95
mm
Hammer Drive Pins - 2.44x6.3x2.64 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 5.36 mm    Max Head Thickness (h): 2.18 mm    Nom. Pilot Length: 1.2 mm   
Part Number: HDP024-06R-S4 (PK-5)
131 units (655 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$1.05 AUD
$5.18 AUD $1.05 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

131 units (655 pcs) Available Now. Backorder if more than 131.
Hammer Drive Pins - 2.44x7.9x2.64 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.44
mm

(Equiv. 0.096 in.)
Approx. Length (l)
7.9
mm

(Equiv. 0.311 in.)
Max Hole Dia.
2.64
mm

(Equiv. 0.104 in.)
Approx Pin Diameter (d1)
2.95
mm
Max Head Diameter (d2)
5.36
mm
Max Head Thickness (h)
2.18
mm
Hammer Drive Pins - 2.44x7.9x2.64 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.2 mm   
Part Number: HDP024-08R-S4 (PK-10)
148 units (1480 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$2.14 AUD
$10.51 AUD $2.14 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 148 available can be backordered.
Hammer Drive Pins - 2.44x7.9x2.64 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.44
mm

(Equiv. 0.096 in.)
Approx. Length (l)
7.9
mm

(Equiv. 0.311 in.)
Max Hole Dia.
2.64
mm

(Equiv. 0.104 in.)
Approx Pin Diameter (d1)
2.95
mm
Hammer Drive Pins - 2.44x7.9x2.64 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 5.36 mm    Max Head Thickness (h): 2.18 mm    Nom. Pilot Length: 1.2 mm   
Part Number: HDP024-08R-S4 (PK-10)
148 units (1480 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$2.14 AUD
$10.51 AUD $2.14 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

148 units (1480 pcs) Available Now. Backorder if more than 148.
Hammer Drive Pins - 2.44x9.5x2.64 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.44
mm

(Equiv. 0.096 in.)
Approx. Length (l)
9.5
mm

(Equiv. 0.374 in.)
Max Hole Dia.
2.64
mm

(Equiv. 0.104 in.)
Approx Pin Diameter (d1)
2.95
mm
Max Head Diameter (d2)
5.36
mm
Max Head Thickness (h)
2.18
mm
Hammer Drive Pins - 2.44x9.5x2.64 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.6 mm   
Part Number: HDP024-09R-S4 (PK-10)
40 units (400 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$2.14 AUD
$10.51 AUD $2.14 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 40 available can be backordered.
Hammer Drive Pins - 2.44x9.5x2.64 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.44
mm

(Equiv. 0.096 in.)
Approx. Length (l)
9.5
mm

(Equiv. 0.374 in.)
Max Hole Dia.
2.64
mm

(Equiv. 0.104 in.)
Approx Pin Diameter (d1)
2.95
mm
Hammer Drive Pins - 2.44x9.5x2.64 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 5.36 mm    Max Head Thickness (h): 2.18 mm    Nom. Pilot Length: 1.6 mm   
Part Number: HDP024-09R-S4 (PK-10)
40 units (400 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$2.14 AUD
$10.51 AUD $2.14 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

40 units (400 pcs) Available Now. Backorder if more than 40.
Hammer Drive Pins - 2.95x6.3x3.05 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.95
mm

(Equiv. 0.116 in.)
Approx. Length (l)
6.3
mm

(Equiv. 0.248 in.)
Max Hole Dia.
3.05
mm

(Equiv. 0.12 in.)
Approx Pin Diameter (d1)
3.56
mm
Max Head Diameter (d2)
6.60
mm
Max Head Thickness (h)
2.62
mm
Hammer Drive Pins - 2.95x6.3x3.05 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.2 mm   
Part Number: HDP029-06R-S4 (PK-10)
18 units (180 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$10.86 AUD
$10.86 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 18 available can be backordered.
Hammer Drive Pins - 2.95x6.3x3.05 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.95
mm

(Equiv. 0.116 in.)
Approx. Length (l)
6.3
mm

(Equiv. 0.248 in.)
Max Hole Dia.
3.05
mm

(Equiv. 0.12 in.)
Approx Pin Diameter (d1)
3.56
mm
Hammer Drive Pins - 2.95x6.3x3.05 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 6.60 mm    Max Head Thickness (h): 2.62 mm    Nom. Pilot Length: 1.2 mm   
Part Number: HDP029-06R-S4 (PK-10)
18 units (180 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$10.86 AUD
$10.86 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

18 units (180 pcs) Available Now. Backorder if more than 18.
Hammer Drive Pins - 2.95x7.9x3.05 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.95
mm

(Equiv. 0.116 in.)
Approx. Length (l)
7.9
mm

(Equiv. 0.311 in.)
Max Hole Dia.
3.05
mm

(Equiv. 0.12 in.)
Approx Pin Diameter (d1)
3.56
mm
Max Head Diameter (d2)
6.60
mm
Max Head Thickness (h)
2.62
mm
Hammer Drive Pins - 2.95x7.9x3.05 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.2 mm   
Part Number: HDP029-08R-S4 (PK-10)
39 units (390 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$10.59 AUD
$10.59 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 39 available can be backordered.
Hammer Drive Pins - 2.95x7.9x3.05 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.95
mm

(Equiv. 0.116 in.)
Approx. Length (l)
7.9
mm

(Equiv. 0.311 in.)
Max Hole Dia.
3.05
mm

(Equiv. 0.12 in.)
Approx Pin Diameter (d1)
3.56
mm
Hammer Drive Pins - 2.95x7.9x3.05 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 6.60 mm    Max Head Thickness (h): 2.62 mm    Nom. Pilot Length: 1.2 mm   
Part Number: HDP029-08R-S4 (PK-10)
39 units (390 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$10.59 AUD
$10.59 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

39 units (390 pcs) Available Now. Backorder if more than 39.
Hammer Drive Pins - 2.95x9.5x3.05 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.95
mm

(Equiv. 0.116 in.)
Approx. Length (l)
9.5
mm

(Equiv. 0.374 in.)
Max Hole Dia.
3.05
mm

(Equiv. 0.12 in.)
Approx Pin Diameter (d1)
3.56
mm
Max Head Diameter (d2)
6.60
mm
Max Head Thickness (h)
2.62
mm
Hammer Drive Pins - 2.95x9.5x3.05 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.6 mm   
Part Number: HDP029-09R-S4 (PK-5)
68 units (340 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$5.32 AUD
$5.32 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 68 available can be backordered.
Hammer Drive Pins - 2.95x9.5x3.05 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.95
mm

(Equiv. 0.116 in.)
Approx. Length (l)
9.5
mm

(Equiv. 0.374 in.)
Max Hole Dia.
3.05
mm

(Equiv. 0.12 in.)
Approx Pin Diameter (d1)
3.56
mm
Hammer Drive Pins - 2.95x9.5x3.05 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 6.60 mm    Max Head Thickness (h): 2.62 mm    Nom. Pilot Length: 1.6 mm   
Part Number: HDP029-09R-S4 (PK-5)
68 units (340 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$5.32 AUD
$5.32 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

68 units (340 pcs) Available Now. Backorder if more than 68.
Hammer Drive Pins - 2.95x12.7x3.05 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.95
mm

(Equiv. 0.116 in.)
Approx. Length (l)
12.7
mm

(Equiv. 0.5 in.)
Max Hole Dia.
3.05
mm

(Equiv. 0.12 in.)
Approx Pin Diameter (d1)
3.56
mm
Max Head Diameter (d2)
6.60
mm
Max Head Thickness (h)
2.62
mm
Hammer Drive Pins - 2.95x12.7x3.05 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.6 mm   
Part Number: HDP029-13R-S4 (PK-10)
75 units (750 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$2.14 AUD
$10.51 AUD $2.14 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 75 available can be backordered.
Hammer Drive Pins - 2.95x12.7x3.05 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
2.95
mm

(Equiv. 0.116 in.)
Approx. Length (l)
12.7
mm

(Equiv. 0.5 in.)
Max Hole Dia.
3.05
mm

(Equiv. 0.12 in.)
Approx Pin Diameter (d1)
3.56
mm
Hammer Drive Pins - 2.95x12.7x3.05 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 6.60 mm    Max Head Thickness (h): 2.62 mm    Nom. Pilot Length: 1.6 mm   
Part Number: HDP029-13R-S4 (PK-10)
75 units (750 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$2.14 AUD
$10.51 AUD $2.14 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

75 units (750 pcs) Available Now. Backorder if more than 75.
Hammer Drive Pins - 3.45x9.5x3.65 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
3.45
mm

(Equiv. 0.136 in.)
Approx. Length (l)
9.5
mm

(Equiv. 0.374 in.)
Max Hole Dia.
3.65
mm

(Equiv. 0.144 in.)
Approx Pin Diameter (d1)
4.24
mm
Max Head Diameter (d2)
7.85
mm
Max Head Thickness (h)
3.05
mm
Hammer Drive Pins - 3.45x9.5x3.65 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.6 mm   
Part Number: HDP034-09R-S4 (PK-5)
24 units (120 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$6.77 AUD
$6.77 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 24 available can be backordered.
Hammer Drive Pins - 3.45x9.5x3.65 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
3.45
mm

(Equiv. 0.136 in.)
Approx. Length (l)
9.5
mm

(Equiv. 0.374 in.)
Max Hole Dia.
3.65
mm

(Equiv. 0.144 in.)
Approx Pin Diameter (d1)
4.24
mm
Hammer Drive Pins - 3.45x9.5x3.65 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 7.85 mm    Max Head Thickness (h): 3.05 mm    Nom. Pilot Length: 1.6 mm   
Part Number: HDP034-09R-S4 (PK-5)
24 units (120 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$6.77 AUD
$6.77 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

24 units (120 pcs) Available Now. Backorder if more than 24.
Hammer Drive Pins - 3.45x12.7x3.65 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
3.45
mm

(Equiv. 0.136 in.)
Approx. Length (l)
12.7
mm

(Equiv. 0.5 in.)
Max Hole Dia.
3.65
mm

(Equiv. 0.144 in.)
Approx Pin Diameter (d1)
4.24
mm
Max Head Diameter (d2)
7.85
mm
Max Head Thickness (h)
3.05
mm
Hammer Drive Pins - 3.45x12.7x3.65 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.6 mm   
Part Number: HDP034-13R-S4 (PK-5)
38 units (190 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$1.95 AUD
$9.50 AUD $1.95 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 38 available can be backordered.
Hammer Drive Pins - 3.45x12.7x3.65 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
3.45
mm

(Equiv. 0.136 in.)
Approx. Length (l)
12.7
mm

(Equiv. 0.5 in.)
Max Hole Dia.
3.65
mm

(Equiv. 0.144 in.)
Approx Pin Diameter (d1)
4.24
mm
Hammer Drive Pins - 3.45x12.7x3.65 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 7.85 mm    Max Head Thickness (h): 3.05 mm    Nom. Pilot Length: 1.6 mm   
Part Number: HDP034-13R-S4 (PK-5)
38 units (190 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$1.95 AUD
$9.50 AUD $1.95 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

38 units (190 pcs) Available Now. Backorder if more than 38.
Hammer Drive Pins - 3.8x9.5x4.09 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
3.80
mm

(Equiv. 0.15 in.)
Approx. Length (l)
9.5
mm

(Equiv. 0.374 in.)
Max Hole Dia.
4.09
mm

(Equiv. 0.161 in.)
Approx Pin Diameter (d1)
4.62
mm
Max Head Diameter (d2)
9.11
mm
Max Head Thickness (h)
3.48
mm
Hammer Drive Pins - 3.8x9.5x4.09 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.6 mm   
Part Number: HDP038-09R-S4 (PK-5)
33 units (165 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$1.68 AUD
$8.42 AUD $1.68 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 33 available can be backordered.
Hammer Drive Pins - 3.8x9.5x4.09 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
3.80
mm

(Equiv. 0.15 in.)
Approx. Length (l)
9.5
mm

(Equiv. 0.374 in.)
Max Hole Dia.
4.09
mm

(Equiv. 0.161 in.)
Approx Pin Diameter (d1)
4.62
mm
Hammer Drive Pins - 3.8x9.5x4.09 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 9.11 mm    Max Head Thickness (h): 3.48 mm    Nom. Pilot Length: 1.6 mm   
Part Number: HDP038-09R-S4 (PK-5)
33 units (165 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$1.68 AUD
$8.42 AUD $1.68 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

33 units (165 pcs) Available Now. Backorder if more than 33.
Hammer Drive Pins - 3.8x12.7x4.09 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
3.80
mm

(Equiv. 0.15 in.)
Approx. Length (l)
12.7
mm

(Equiv. 0.5 in.)
Max Hole Dia.
4.09
mm

(Equiv. 0.161 in.)
Approx Pin Diameter (d1)
4.62
mm
Max Head Diameter (d2)
9.11
mm
Max Head Thickness (h)
3.48
mm
Hammer Drive Pins - 3.8x12.7x4.09 mm - Stainless Steel
Material: Stainless Steel    Nom. Pilot Length: 1.6 mm   
Part Number: HDP038-13R-S4 (PK-5)
18 units (90 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$2.05 AUD
$9.94 AUD $2.05 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 18 available can be backordered.
Hammer Drive Pins - 3.8x12.7x4.09 mm Round Head Stainless Steel - Stainless Steel Pin
Min Hole Diameter
3.80
mm

(Equiv. 0.15 in.)
Approx. Length (l)
12.7
mm

(Equiv. 0.5 in.)
Max Hole Dia.
4.09
mm

(Equiv. 0.161 in.)
Approx Pin Diameter (d1)
4.62
mm
Hammer Drive Pins - 3.8x12.7x4.09 mm - Stainless Steel
Material: Stainless Steel    Max Head Diameter (d2): 9.11 mm    Max Head Thickness (h): 3.48 mm    Nom. Pilot Length: 1.6 mm   
Part Number: HDP038-13R-S4 (PK-5)
18 units (90 pcs) Available Now | Further orders can be expected around Fri, Jan 09, 2026
$2.05 AUD
$9.94 AUD $2.05 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

18 units (90 pcs) Available Now. Backorder if more than 18.