Inserts - Self Tapping - For Aluminium - Stainless 316

Inserts -> Self Tapping -> For Aluminium -> Stainless 316

There is only 1 product in the sub-categories of Inserts - Self Tapping - For Aluminium - Stainless 316. Browse the Inserts - Self Tapping - For Aluminium - Stainless 316 products table.

Category Details

A selection of Stainless 316 For Aluminium Self Tapping Inserts. Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

  • Threaded bushing with external threads that cuts its own internal threads into a pre-drilled hole.
  • Creates a permanent, wear-resistant, and strong machine thread in materials such as aluminum, brass, cast iron, and plastics, without the need for a pre-tapped hole.
  • Used for strengthening materials, providing durable fastening points for machine screws, and repairing damaged threads.
  • Provides a strong wear and vibration resistant thread.
  • Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately)
  • Hole sizes are reference only. Can vary on batches. Optimum hole size is to be determinded through experimentation.
  • A 60o countersink is required for flush mounting.
  • Can be used in Aluminium, aluminium alloy or hard plastics. Made from 316 stainless steel.

Small Parts & Bearings

Additional resources:


A more comprehensive listing may be found in the Inserts - Self Tapping - For Aluminium - Stainless 316 category on the MBA Minibearings main store.
Internal Thread Rec. Hole Diameter Length (L) Outside Diameter (B) Indicative
Image
Self Tapping Inserts - M8 - 8x1.25mm - 12.6 - 13.4 mm 15 mm For Aluminium - Stainless Steel 316 Similar to A4, 18-10 Insert
Internal Thread
M8 (8x1.25mm)

Rec. Hole Diameter
12.6 - 13.4 mm
mm

(Equiv. 0.496 in.)
Length (L)
15.0
mm

(Equiv. 0.591 in.)
Outside Diameter (B)
M12
Self Tapping Inserts - M8 - 8x1.25mm - 12.6 - 13.4 mm 15 mm For Aluminium - Stainless Steel 316 Similar to A4, 18-10 Insert
Material: Stainless Steel 316 (Similar to A4, 18-10)    Material to be used in: Aluminium, Aluminium Alloy, Hard Plastics   
Part Number: IN-TP-080M-15-A-S6 (Each)
89 Available Now | Further orders can be expected around Tue, Mar 10, 2026
$4.23 AUD
$5.07 AUD $4.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 89 available can be backordered.
Internal Thread Rec. Hole Diameter Length (L) Outside Diameter (B) Indicative
Image
Self Tapping Inserts - M8 - 8x1.25mm - 12.6 - 13.4 mm 15 mm For Aluminium - Stainless Steel 316 Similar to A4, 18-10 Insert
Internal Thread
M8 (8x1.25mm)

Rec. Hole Diameter
12.6 - 13.4 mm
mm

(Equiv. 0.496 in.)
Length (L)
15.0
mm

(Equiv. 0.591 in.)
Outside Diameter (B)
M12
Self Tapping Inserts - M8 - 8x1.25mm - 12.6 - 13.4 mm 15 mm For Aluminium - Stainless Steel 316 Similar to A4, 18-10 Insert
Material: Stainless Steel 316 (Similar to A4, 18-10)    Material to be used in: Aluminium, Aluminium Alloy, Hard Plastics   
Part Number: IN-TP-080M-15-A-S6 (Each)
89 Available Now | Further orders can be expected around Tue, Mar 10, 2026
$4.23 AUD
$5.07 AUD $4.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

89 Available Now. Backorder if more than 89.