Gears - Worm Sets - Module 1.5

Gears -> Worm Sets -> Module 1.5

There are 6 products in the sub-categories of Gears - Worm Sets - Module 1.5. Browse the Gears - Worm Sets - Module 1.5 products table.

Category Details

A selection of Module 1.5 Worm Sets Gears. This is the main category in this series

  • Acetal gear and steel worm sets.
  • Metric sets only.
  • An expanded range may be available on special order. Please enquire.

Small Parts & Bearings

Additional resources:


A more comprehensive listing may be found in the Gears - Worm Sets - Module 1.5 category on the MBA Minibearings main store.
Pitch Teeth Bore (dd) Direction Ratio Lead Angle Indicative
Image
Worm Sets Gears - Pitch Module 1.5 - 20 tooth - 6 mm Module 1.5 - Polyacetal and Steel Gear
Pitch
Module 1.5

Teeth
20

Bore (dd)
6.00
mm

(Equiv. 0.236 in.)
Direction
Right Hand
Ratio
20 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 1.5 - 20 - 6 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 15.00 mm    Hub Diameter: 25.00 mm    Centre Distance (A): 27.5 mm    Gear Length (l): 25 mm    Hub Projection (lh): 10 mm    Tip Diameter (da): 35.3 mm   
Part Number: WGS1-150-020-060-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$41.68 AUD
$41.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pitch Teeth Bore (dd) Direction Indicative
Image
Worm Sets Gears - Pitch Module 1.5 - 20 tooth - 6 mm Module 1.5 - Polyacetal and Steel Gear
Pitch
Module 1.5

Teeth
20

Bore (dd)
6.00
mm

(Equiv. 0.236 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 1.5 - 20 - 6 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 20 to 1    Lead Angle: 1 Deg    Face Width (b): 15.00 mm    Hub Diameter: 25.00 mm    Centre Distance (A): 27.5 mm    Gear Length (l): 25 mm    Hub Projection (lh): 10 mm    Tip Diameter (da): 35.3 mm   
Part Number: WGS1-150-020-060-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$41.68 AUD
$41.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.5 - 20 tooth - 6 mm Module 1.5 - Polyacetal and Steel Gear
Pitch
Module 1.5

Teeth
20

Bore (dd)
6.00
mm

(Equiv. 0.236 in.)
Direction
Right Hand
Ratio
20 to 1
Lead Angle
2
Deg
Worm Sets Gears - Pitch 1.5 - 20 - 6 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 15.00 mm    Hub Diameter: 25.00 mm    Centre Distance (A): 27.5 mm    Gear Length (l): 25 mm    Hub Projection (lh): 10 mm    Tip Diameter (da): 35.3 mm   
Part Number: WGS2-150-020-060-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$41.68 AUD
$41.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.5 - 20 tooth - 6 mm Module 1.5 - Polyacetal and Steel Gear
Pitch
Module 1.5

Teeth
20

Bore (dd)
6.00
mm

(Equiv. 0.236 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 1.5 - 20 - 6 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 20 to 1    Lead Angle: 2 Deg    Face Width (b): 15.00 mm    Hub Diameter: 25.00 mm    Centre Distance (A): 27.5 mm    Gear Length (l): 25 mm    Hub Projection (lh): 10 mm    Tip Diameter (da): 35.3 mm   
Part Number: WGS2-150-020-060-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$41.68 AUD
$41.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.5 - 30 tooth - 8 mm Module 1.5 - Polyacetal and Steel Gear
Pitch
Module 1.5

Teeth
30

Bore (dd)
8.00
mm

(Equiv. 0.315 in.)
Direction
Right Hand
Ratio
30 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 1.5 - 30 - 8 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 15.00 mm    Hub Diameter: 30.00 mm    Centre Distance (A): 35 mm    Gear Length (l): 25 mm    Hub Projection (lh): 10 mm    Tip Diameter (da): 50.3 mm   
Part Number: WGS1-150-030-080-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$61.77 AUD
$61.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.5 - 30 tooth - 8 mm Module 1.5 - Polyacetal and Steel Gear
Pitch
Module 1.5

Teeth
30

Bore (dd)
8.00
mm

(Equiv. 0.315 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 1.5 - 30 - 8 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 30 to 1    Lead Angle: 1 Deg    Face Width (b): 15.00 mm    Hub Diameter: 30.00 mm    Centre Distance (A): 35 mm    Gear Length (l): 25 mm    Hub Projection (lh): 10 mm    Tip Diameter (da): 50.3 mm   
Part Number: WGS1-150-030-080-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$61.77 AUD
$61.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.5 - 30 tooth - 8 mm Module 1.5 - Polyacetal and Steel Gear
Pitch
Module 1.5

Teeth
30

Bore (dd)
8.00
mm

(Equiv. 0.315 in.)
Direction
Right Hand
Ratio
30 to 1
Lead Angle
2
Deg
Worm Sets Gears - Pitch 1.5 - 30 - 8 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 15.00 mm    Hub Diameter: 30.00 mm    Centre Distance (A): 35 mm    Gear Length (l): 25 mm    Hub Projection (lh): 10 mm    Tip Diameter (da): 50.3 mm   
Part Number: WGS2-150-030-080-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$61.77 AUD
$61.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.5 - 30 tooth - 8 mm Module 1.5 - Polyacetal and Steel Gear
Pitch
Module 1.5

Teeth
30

Bore (dd)
8.00
mm

(Equiv. 0.315 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 1.5 - 30 - 8 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 30 to 1    Lead Angle: 2 Deg    Face Width (b): 15.00 mm    Hub Diameter: 30.00 mm    Centre Distance (A): 35 mm    Gear Length (l): 25 mm    Hub Projection (lh): 10 mm    Tip Diameter (da): 50.3 mm   
Part Number: WGS2-150-030-080-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$61.77 AUD
$61.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.5 - 40 tooth - 10 mm Module 1.5 - Polyacetal and Steel Gear
Pitch
Module 1.5

Teeth
40

Bore (dd)
10.00
mm

(Equiv. 0.394 in.)
Direction
Right Hand
Ratio
40 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 1.5 - 40 - 10 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 15.00 mm    Hub Diameter: 40.00 mm    Centre Distance (A): 42.5 mm    Gear Length (l): 28 mm    Hub Projection (lh): 13 mm    Tip Diameter (da): 65.3 mm   
Part Number: WGS1-150-040-100-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$101.05 AUD
$101.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.5 - 40 tooth - 10 mm Module 1.5 - Polyacetal and Steel Gear
Pitch
Module 1.5

Teeth
40

Bore (dd)
10.00
mm

(Equiv. 0.394 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 1.5 - 40 - 10 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 40 to 1    Lead Angle: 1 Deg    Face Width (b): 15.00 mm    Hub Diameter: 40.00 mm    Centre Distance (A): 42.5 mm    Gear Length (l): 28 mm    Hub Projection (lh): 13 mm    Tip Diameter (da): 65.3 mm   
Part Number: WGS1-150-040-100-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$101.05 AUD
$101.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.5 - 50 tooth - 10 mm Module 1.5 - Polyacetal and Steel Gear
Pitch
Module 1.5

Teeth
50

Bore (dd)
10.00
mm

(Equiv. 0.394 in.)
Direction
Right Hand
Ratio
50 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 1.5 - 50 - 10 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 15.00 mm    Hub Diameter: 50.00 mm    Centre Distance (A): 50 mm    Gear Length (l): 28 mm    Hub Projection (lh): 13 mm    Tip Diameter (da): 80.3 mm   
Part Number: WGS1-150-050-100-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$123.68 AUD
$123.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.5 - 50 tooth - 10 mm Module 1.5 - Polyacetal and Steel Gear
Pitch
Module 1.5

Teeth
50

Bore (dd)
10.00
mm

(Equiv. 0.394 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 1.5 - 50 - 10 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 50 to 1    Lead Angle: 1 Deg    Face Width (b): 15.00 mm    Hub Diameter: 50.00 mm    Centre Distance (A): 50 mm    Gear Length (l): 28 mm    Hub Projection (lh): 13 mm    Tip Diameter (da): 80.3 mm   
Part Number: WGS1-150-050-100-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$123.68 AUD
$123.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.