Gears - Worm Sets - Module 1

Gears -> Worm Sets -> Module 1

There are 9 products in the sub-categories of Gears - Worm Sets - Module 1. Browse the Gears - Worm Sets - Module 1 products table.

Category Details

A selection of Module 1 Worm Sets Gears. This is the main category in this series

  • Acetal gear and steel worm sets.
  • Metric sets only.
  • An expanded range may be available on special order. Please enquire.

Small Parts & Bearings

Additional resources:


A more comprehensive listing may be found in the Gears - Worm Sets - Module 1 category on the MBA Minibearings main store.
Pitch Teeth Bore (dd) Direction Ratio Lead Angle Indicative
Image
Worm Sets Gears - Pitch Module 1.0 - 20 tooth - 5 mm Module 1 - Polyacetal and Steel Gear
Pitch
Module 1.0

Teeth
20

Bore (dd)
5.00
mm

(Equiv. 0.197 in.)
Direction
Right Hand
Ratio
20 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 1 - 20 - 5 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 10.00 mm    Hub Diameter: 17.00 mm    Centre Distance (A): 18 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 23.5 mm   
Part Number: WGS1-100-020-050-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$36.32 AUD
$36.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pitch Teeth Bore (dd) Direction Indicative
Image
Worm Sets Gears - Pitch Module 1.0 - 20 tooth - 5 mm Module 1 - Polyacetal and Steel Gear
Pitch
Module 1.0

Teeth
20

Bore (dd)
5.00
mm

(Equiv. 0.197 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 1 - 20 - 5 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 20 to 1    Lead Angle: 1 Deg    Face Width (b): 10.00 mm    Hub Diameter: 17.00 mm    Centre Distance (A): 18 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 23.5 mm   
Part Number: WGS1-100-020-050-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$36.32 AUD
$36.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.0 - 20 tooth - 5 mm Module 1 - Polyacetal and Steel Gear
Pitch
Module 1.0

Teeth
20

Bore (dd)
5.00
mm

(Equiv. 0.197 in.)
Direction
Right Hand
Ratio
20 to 1
Lead Angle
2
Deg
Worm Sets Gears - Pitch 1 - 20 - 5 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 10.00 mm    Hub Diameter: 17.00 mm    Centre Distance (A): 23 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 23.5 mm   
Part Number: WGS2-100-020-050-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$36.32 AUD
$36.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.0 - 20 tooth - 5 mm Module 1 - Polyacetal and Steel Gear
Pitch
Module 1.0

Teeth
20

Bore (dd)
5.00
mm

(Equiv. 0.197 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 1 - 20 - 5 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 20 to 1    Lead Angle: 2 Deg    Face Width (b): 10.00 mm    Hub Diameter: 17.00 mm    Centre Distance (A): 23 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 23.5 mm   
Part Number: WGS2-100-020-050-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$36.32 AUD
$36.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.0 - 30 tooth - 6 mm Module 1 - Polyacetal and Steel Gear
Pitch
Module 1.0

Teeth
30

Bore (dd)
6.00
mm

(Equiv. 0.236 in.)
Direction
Right Hand
Ratio
30 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 1 - 30 - 6 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 10.00 mm    Hub Diameter: 22.00 mm    Centre Distance (A): 23 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 33.5 mm   
Part Number: WGS1-100-030-060-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$44.32 AUD
$44.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.0 - 30 tooth - 6 mm Module 1 - Polyacetal and Steel Gear
Pitch
Module 1.0

Teeth
30

Bore (dd)
6.00
mm

(Equiv. 0.236 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 1 - 30 - 6 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 30 to 1    Lead Angle: 1 Deg    Face Width (b): 10.00 mm    Hub Diameter: 22.00 mm    Centre Distance (A): 23 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 33.5 mm   
Part Number: WGS1-100-030-060-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$44.32 AUD
$44.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.0 - 30 tooth - 6 mm Module 1 - Polyacetal and Steel Gear
Pitch
Module 1.0

Teeth
30

Bore (dd)
6.00
mm

(Equiv. 0.236 in.)
Direction
Right Hand
Ratio
30 to 1
Lead Angle
2
Deg
Worm Sets Gears - Pitch 1 - 30 - 6 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 10.00 mm    Hub Diameter: 22.00 mm    Centre Distance (A): 28 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 33.5 mm   
Part Number: WGS2-100-030-060-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$44.32 AUD
$44.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.0 - 30 tooth - 6 mm Module 1 - Polyacetal and Steel Gear
Pitch
Module 1.0

Teeth
30

Bore (dd)
6.00
mm

(Equiv. 0.236 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 1 - 30 - 6 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 30 to 1    Lead Angle: 2 Deg    Face Width (b): 10.00 mm    Hub Diameter: 22.00 mm    Centre Distance (A): 28 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 33.5 mm   
Part Number: WGS2-100-030-060-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$44.32 AUD
$44.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.0 - 40 tooth - 8 mm Module 1 - Polyacetal and Steel Gear
Pitch
Module 1.0

Teeth
40

Bore (dd)
8.00
mm

(Equiv. 0.315 in.)
Direction
Right Hand
Ratio
40 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 1 - 40 - 8 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 10.00 mm    Hub Diameter: 30.00 mm    Centre Distance (A): 33 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 43.5 mm   
Part Number: WGS1-100-040-080-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$48.41 AUD
$48.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.0 - 40 tooth - 8 mm Module 1 - Polyacetal and Steel Gear
Pitch
Module 1.0

Teeth
40

Bore (dd)
8.00
mm

(Equiv. 0.315 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 1 - 40 - 8 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 40 to 1    Lead Angle: 1 Deg    Face Width (b): 10.00 mm    Hub Diameter: 30.00 mm    Centre Distance (A): 33 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 43.5 mm   
Part Number: WGS1-100-040-080-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$48.41 AUD
$48.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.0 - 50 tooth - 8 mm Module 1 - Polyacetal and Steel Gear
Pitch
Module 1.0

Teeth
50

Bore (dd)
8.00
mm

(Equiv. 0.315 in.)
Direction
Right Hand
Ratio
50 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 1 - 50 - 8 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 10.00 mm    Hub Diameter: 35.00 mm    Centre Distance (A): 38 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 53.5 mm   
Part Number: WGS1-100-050-080-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$59.50 AUD
$59.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.0 - 50 tooth - 8 mm Module 1 - Polyacetal and Steel Gear
Pitch
Module 1.0

Teeth
50

Bore (dd)
8.00
mm

(Equiv. 0.315 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 1 - 50 - 8 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 50 to 1    Lead Angle: 1 Deg    Face Width (b): 10.00 mm    Hub Diameter: 35.00 mm    Centre Distance (A): 38 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 53.5 mm   
Part Number: WGS1-100-050-080-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$59.50 AUD
$59.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.0 - 60 tooth - 8 mm Module 1 - Polyacetal and Steel Gear
Pitch
Module 1.0

Teeth
60

Bore (dd)
8.00
mm

(Equiv. 0.315 in.)
Direction
Right Hand
Ratio
60 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 1 - 60 - 8 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 10.00 mm    Hub Diameter: 40.00 mm    Centre Distance (A): 48 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 63.5 mm   
Part Number: WGS1-100-060-080-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$75.59 AUD
$75.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.0 - 60 tooth - 8 mm Module 1 - Polyacetal and Steel Gear
Pitch
Module 1.0

Teeth
60

Bore (dd)
8.00
mm

(Equiv. 0.315 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 1 - 60 - 8 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 60 to 1    Lead Angle: 1 Deg    Face Width (b): 10.00 mm    Hub Diameter: 40.00 mm    Centre Distance (A): 48 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 63.5 mm   
Part Number: WGS1-100-060-080-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$75.59 AUD
$75.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.0 - 80 tooth - 10 mm Module 1 - Polyacetal and Steel Gear
Pitch
Module 1.0

Teeth
80

Bore (dd)
10.00
mm

(Equiv. 0.394 in.)
Direction
Right Hand
Ratio
80 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 1 - 80 - 10 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 10.00 mm    Hub Diameter: 50.00 mm    Centre Distance (A): 58 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 83.5 mm   
Part Number: WGS1-100-080-100-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$110.32 AUD
$110.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.0 - 80 tooth - 10 mm Module 1 - Polyacetal and Steel Gear
Pitch
Module 1.0

Teeth
80

Bore (dd)
10.00
mm

(Equiv. 0.394 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 1 - 80 - 10 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 80 to 1    Lead Angle: 1 Deg    Face Width (b): 10.00 mm    Hub Diameter: 50.00 mm    Centre Distance (A): 58 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 83.5 mm   
Part Number: WGS1-100-080-100-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$110.32 AUD
$110.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.0 - 100 tooth - 10 mm Module 1 - Polyacetal and Steel Gear
Pitch
Module 1.0

Teeth
100

Bore (dd)
10.00
mm

(Equiv. 0.394 in.)
Direction
Right Hand
Ratio
100 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 1 - 100 - 10 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 10.00 mm    Hub Diameter: 60.00 mm    Centre Distance (A): 58 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 103.5 mm   
Part Number: WGS1-100-100-100-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$158.32 AUD
$158.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 1.0 - 100 tooth - 10 mm Module 1 - Polyacetal and Steel Gear
Pitch
Module 1.0

Teeth
100

Bore (dd)
10.00
mm

(Equiv. 0.394 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 1 - 100 - 10 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 100 to 1    Lead Angle: 1 Deg    Face Width (b): 10.00 mm    Hub Diameter: 60.00 mm    Centre Distance (A): 58 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 103.5 mm   
Part Number: WGS1-100-100-100-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Feb 03, 2026
$158.32 AUD
$158.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.