Gears - Worm Sets - Module 0.8

Gears -> Worm Sets -> Module 0.8

There are 5 products in the sub-categories of Gears - Worm Sets - Module 0.8. Browse the Gears - Worm Sets - Module 0.8 products table.

Category Details

A selection of Module 0.8 Worm Sets Gears. This is the main category in this series

  • Acetal gear and steel worm sets.
  • Metric sets only.
  • An expanded range may be available on special order. Please enquire.

Small Parts & Bearings

Additional resources:


A more comprehensive listing may be found in the Gears - Worm Sets - Module 0.8 category on the MBA Minibearings main store.
Pitch Teeth Bore (dd) Direction Ratio Lead Angle Indicative
Image
Worm Sets Gears - Pitch Module 0.8 - 20 tooth - 4 mm Module 0.8 - Polyacetal and Steel Gear
Pitch
Module 0.8

Teeth
20

Bore (dd)
4.00
mm

(Equiv. 0.157 in.)
Direction
Right Hand
Ratio
20 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 0.8 - 20 - 4 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 6.00 mm    Hub Diameter: 12.00 mm    Centre Distance (A): 13.2 mm    Gear Length (l): 12 mm    Hub Projection (lh): 6 mm    Tip Diameter (da): 18.1 mm   
Part Number: WGS1-080-020-040-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$24.59 AUD
$24.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pitch Teeth Bore (dd) Direction Indicative
Image
Worm Sets Gears - Pitch Module 0.8 - 20 tooth - 4 mm Module 0.8 - Polyacetal and Steel Gear
Pitch
Module 0.8

Teeth
20

Bore (dd)
4.00
mm

(Equiv. 0.157 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 0.8 - 20 - 4 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 20 to 1    Lead Angle: 1 Deg    Face Width (b): 6.00 mm    Hub Diameter: 12.00 mm    Centre Distance (A): 13.2 mm    Gear Length (l): 12 mm    Hub Projection (lh): 6 mm    Tip Diameter (da): 18.1 mm   
Part Number: WGS1-080-020-040-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$24.59 AUD
$24.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 0.8 - 30 tooth - 5 mm Module 0.8 - Polyacetal and Steel Gear
Pitch
Module 0.8

Teeth
30

Bore (dd)
5.00
mm

(Equiv. 0.197 in.)
Direction
Right Hand
Ratio
30 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 0.8 - 30 - 5 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 6.00 mm    Hub Diameter: 18.00 mm    Centre Distance (A): 17.2 mm    Gear Length (l): 12 mm    Hub Projection (lh): 6 mm    Tip Diameter (da): 26.1 mm   
Part Number: WGS1-080-030-050-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$28.86 AUD
$28.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 0.8 - 30 tooth - 5 mm Module 0.8 - Polyacetal and Steel Gear
Pitch
Module 0.8

Teeth
30

Bore (dd)
5.00
mm

(Equiv. 0.197 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 0.8 - 30 - 5 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 30 to 1    Lead Angle: 1 Deg    Face Width (b): 6.00 mm    Hub Diameter: 18.00 mm    Centre Distance (A): 17.2 mm    Gear Length (l): 12 mm    Hub Projection (lh): 6 mm    Tip Diameter (da): 26.1 mm   
Part Number: WGS1-080-030-050-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$28.86 AUD
$28.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 0.8 - 40 tooth - 6 mm Module 0.8 - Polyacetal and Steel Gear
Pitch
Module 0.8

Teeth
40

Bore (dd)
6.00
mm

(Equiv. 0.236 in.)
Direction
Right Hand
Ratio
40 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 0.8 - 40 - 6 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 6.00 mm    Hub Diameter: 20.00 mm    Centre Distance (A): 21.2 mm    Gear Length (l): 14 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 34.1 mm   
Part Number: WGS1-080-040-060-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$32.95 AUD
$32.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 0.8 - 40 tooth - 6 mm Module 0.8 - Polyacetal and Steel Gear
Pitch
Module 0.8

Teeth
40

Bore (dd)
6.00
mm

(Equiv. 0.236 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 0.8 - 40 - 6 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 40 to 1    Lead Angle: 1 Deg    Face Width (b): 6.00 mm    Hub Diameter: 20.00 mm    Centre Distance (A): 21.2 mm    Gear Length (l): 14 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 34.1 mm   
Part Number: WGS1-080-040-060-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$32.95 AUD
$32.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 0.8 - 50 tooth - 6 mm Module 0.8 - Polyacetal and Steel Gear
Pitch
Module 0.8

Teeth
50

Bore (dd)
6.00
mm

(Equiv. 0.236 in.)
Direction
Right Hand
Ratio
50 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 0.8 - 50 - 6 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 6.00 mm    Hub Diameter: 25.00 mm    Centre Distance (A): 25.2 mm    Gear Length (l): 14 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 42.1 mm   
Part Number: WGS1-080-050-060-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$38.23 AUD
$38.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 0.8 - 50 tooth - 6 mm Module 0.8 - Polyacetal and Steel Gear
Pitch
Module 0.8

Teeth
50

Bore (dd)
6.00
mm

(Equiv. 0.236 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 0.8 - 50 - 6 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 50 to 1    Lead Angle: 1 Deg    Face Width (b): 6.00 mm    Hub Diameter: 25.00 mm    Centre Distance (A): 25.2 mm    Gear Length (l): 14 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 42.1 mm   
Part Number: WGS1-080-050-060-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$38.23 AUD
$38.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 0.8 - 60 tooth - 8 mm Module 0.8 - Polyacetal and Steel Gear
Pitch
Module 0.8

Teeth
60

Bore (dd)
8.00
mm

(Equiv. 0.315 in.)
Direction
Right Hand
Ratio
60 to 1
Lead Angle
1
Deg
Worm Sets Gears - Pitch 0.8 - 60 - 8 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Face Width (b): 6.00 mm    Hub Diameter: 30.00 mm    Centre Distance (A): 29.2 mm    Gear Length (l): 14 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 50.1 mm   
Part Number: WGS1-080-060-080-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$45.32 AUD
$45.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Worm Sets Gears - Pitch Module 0.8 - 60 tooth - 8 mm Module 0.8 - Polyacetal and Steel Gear
Pitch
Module 0.8

Teeth
60

Bore (dd)
8.00
mm

(Equiv. 0.315 in.)
Direction
Right Hand
Worm Sets Gears - Pitch 0.8 - 60 - 8 mm - Polyacetal and Steel
Material: Polyacetal and Steel    Ratio: 60 to 1    Lead Angle: 1 Deg    Face Width (b): 6.00 mm    Hub Diameter: 30.00 mm    Centre Distance (A): 29.2 mm    Gear Length (l): 14 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 50.1 mm   
Part Number: WGS1-080-060-080-R-ACS (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$45.32 AUD
$45.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.