Gears - Spur - Hubbed - 6DP Steel

Gears -> Spur -> Hubbed -> 6DP Steel

There is only 1 product in the sub-categories of Gears - Spur - Hubbed - 6DP Steel. Browse the Gears - Spur - Hubbed - 6DP Steel products table.

Category Details

A selection of 6DP Steel Hubbed Spur Gears. PCD = No. of Teeth x 4.233mm (1/6 in.). 14.5 Degree Pressure Angle. Steel. DP stands for Diametrical Pitch and is an imperial measurement system.

  • There are more items available in this range than currently listed. Please enquire if you have special requirements. Expanded range includes hardened gears, stainless steel, antibacklash, and special bore sizes.
  • Be sure to match the pitch type and tooth angle when selecting spur gears.
  • An expanded range may be available on special order. Please enquire.
  • The diameter increases by 1 inch for every 6 teeth
  • 6 Diametrical Pitch. Approx 13.3mm between the teeth.

Small Parts & Bearings

Additional resources:


A more comprehensive listing may be found in the Gears - Spur - Hubbed - 6DP Steel category on the MBA Minibearings main store.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Type Indicative
Image
Number of Teeth
12

Pitch Circle Diameter (PD)
50.800
mm

(Equiv. 2 in.)
Bore (d)
25.400
mm

(Equiv. 1 in.)
Outside Diameter (OD)
59.258
mm
Face Width (FW)
38.100
mm
Type
Hubbed
Spur Gears - 12 tooth - 50.8x25.4 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Hub Diameter (D1): 37.084 mm    Hub Projection (HL): 22.352 mm    Locking Method: None    Quality: Commercial   
Part Number: G051B-012-V6-381-254-C-G (Each)
Spur Gears - 12 tooth - 50.8x25.4 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Out of Stock | Backorder Now | Orders can be expected around Mon, Dec 29, 2025
$369.23 AUD
$369.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
Number of Teeth
12

Pitch Circle Diameter (PD)
50.800
mm

(Equiv. 2 in.)
Bore (d)
25.400
mm

(Equiv. 1 in.)
Outside Diameter (OD)
59.258
mm
Spur Gears - 12 tooth - 50.8x25.4 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Face Width (FW): 38.100 mm    Type: Hubbed    Hub Diameter (D1): 37.084 mm    Hub Projection (HL): 22.352 mm    Locking Method: None    Quality: Commercial   
Part Number: G051B-012-V6-381-254-C-G (Each)
Spur Gears - 12 tooth - 50.8x25.4 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Out of Stock | Backorder Now | Orders can be expected around Mon, Dec 29, 2025
$369.23 AUD
$369.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.