Gears - Spur - Hubbed - 20DP Steel

Gears -> Spur -> Hubbed -> 20DP Steel

There are 2 products in the sub-categories of Gears - Spur - Hubbed - 20DP Steel. Browse the Gears - Spur - Hubbed - 20DP Steel products table.

Category Details

A selection of 20DP Steel Hubbed Spur Gears. PCD in mm = No. of Teeth x 1.27 (1/20 in.). 14.5 Degree Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

  • There are more items available in this range than currently listed. Please enquire if you have special requirements. Expanded range includes hardened gears, stainless steel, antibacklash, and special bore sizes.
  • Be sure to match the pitch type and tooth angle when selecting spur gears.
  • An expanded range may be available on special order. Please enquire.
  • The diameter increases by 1 inch for every 20 teeth
  • 20 Diametrical Pitch. Approx 3.99mm between the teeth.

Small Parts & Bearings

Additional resources:


A more comprehensive listing may be found in the Gears - Spur - Hubbed - 20DP Steel category on the MBA Minibearings main store.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Type Indicative
Image
Number of Teeth
12

Pitch Circle Diameter (PD)
15.240
mm

(Equiv. 0.6 in.)
Bore (d)
7.938
mm

(Equiv. 0.313 in.)
Outside Diameter (OD)
17.780
mm
Face Width (FW)
9.525
mm
Type
Hubbed
Spur Gears - 12 tooth - 15.24x7.938 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Hub Diameter (D1): 11.684 mm    Hub Projection (HL): 9.652 mm    Locking Method: None    Quality: Commercial   
Part Number: G015B-012-V20-095-079-CG (Each)
Spur Gears - 12 tooth - 15.24x7.938 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Out of Stock | Backorder Now | Orders can be expected around Mon, Dec 29, 2025
$110.68 AUD
$110.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
Number of Teeth
12

Pitch Circle Diameter (PD)
15.240
mm

(Equiv. 0.6 in.)
Bore (d)
7.938
mm

(Equiv. 0.313 in.)
Outside Diameter (OD)
17.780
mm
Spur Gears - 12 tooth - 15.24x7.938 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Face Width (FW): 9.525 mm    Type: Hubbed    Hub Diameter (D1): 11.684 mm    Hub Projection (HL): 9.652 mm    Locking Method: None    Quality: Commercial   
Part Number: G015B-012-V20-095-079-CG (Each)
Spur Gears - 12 tooth - 15.24x7.938 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Out of Stock | Backorder Now | Orders can be expected around Mon, Dec 29, 2025
$110.68 AUD
$110.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Number of Teeth
48

Pitch Circle Diameter (PD)
60.960
mm

(Equiv. 2.4 in.)
Bore (d)
9.525
mm

(Equiv. 0.375 in.)
Outside Diameter (OD)
63.500
mm
Face Width (FW)
9.525
mm
Type
Hubbed
Spur Gears - 48 tooth - 60.96x9.525 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Hub Diameter (D1): 33.782 mm    Hub Projection (HL): 12.700 mm    Locking Method: None    Quality: Commercial   
Part Number: G061B-048-V20-095-095-CG (Each)
Spur Gears - 48 tooth - 60.96x9.525 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Out of Stock | Backorder Now | Orders can be expected around Mon, Dec 29, 2025
$347.14 AUD
$347.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Number of Teeth
48

Pitch Circle Diameter (PD)
60.960
mm

(Equiv. 2.4 in.)
Bore (d)
9.525
mm

(Equiv. 0.375 in.)
Outside Diameter (OD)
63.500
mm
Spur Gears - 48 tooth - 60.96x9.525 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Face Width (FW): 9.525 mm    Type: Hubbed    Hub Diameter (D1): 33.782 mm    Hub Projection (HL): 12.700 mm    Locking Method: None    Quality: Commercial   
Part Number: G061B-048-V20-095-095-CG (Each)
Spur Gears - 48 tooth - 60.96x9.525 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Out of Stock | Backorder Now | Orders can be expected around Mon, Dec 29, 2025
$347.14 AUD
$347.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.