Gears - Spur - Hubbed - 12DP Steel - 14.5 Deg PA

Gears -> Spur -> Hubbed -> 12DP Steel -> 14.5 Deg PA

There is only 1 product in the sub-categories of Gears - Spur - Hubbed - 12DP Steel - 14.5 Deg PA. Browse the Gears - Spur - Hubbed - 12DP Steel - 14.5 Deg PA products table.

Category Details

A selection of 14.5 Deg PA 12DP Steel Hubbed Spur Gears. PCD in mm = No. of Teeth x 2.117 (1/12 in.). 14.5 Degree Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

  • There are more items available in this range than currently listed. Please enquire if you have special requirements. Expanded range includes hardened gears, stainless steel, antibacklash, and special bore sizes.
  • Be sure to match the pitch type and tooth angle when selecting spur gears.
  • An expanded range may be available on special order. Please enquire.
  • The diameter increases by 1 inch for every 12 teeth
  • 12 Diametrical Pitch. Approx 6.65mm between the teeth.

Small Parts & Bearings

Additional resources:


A more comprehensive listing may be found in the Gears - Spur - Hubbed - 12DP Steel - 14.5 Deg PA category on the MBA Minibearings main store.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Type Indicative
Image
Spur Gears - 12 tooth - 25.4x12.7 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
12

Pitch Circle Diameter (PD)
25.400
mm

(Equiv. 1 in.)
Bore (d)
12.700
mm

(Equiv. 0.5 in.)
Outside Diameter (OD)
29.642
mm
Face Width (FW)
19.050
mm
Type
Hubbed
Spur Gears - 12 tooth - 25.4x12.7 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Hub Diameter (D1): 19.050 mm    Hub Projection (HL): 12.700 mm    Locking Method: None    Quality: Commercial   
Part Number: G025B-012-V12-191-127-CG (Each)
1 Available Now | Further orders can be expected around Sun, Apr 26, 2026
$94.41 AUD
$113.29 AUD $94.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 1 available can be backordered.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
Spur Gears - 12 tooth - 25.4x12.7 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
12

Pitch Circle Diameter (PD)
25.400
mm

(Equiv. 1 in.)
Bore (d)
12.700
mm

(Equiv. 0.5 in.)
Outside Diameter (OD)
29.642
mm
Spur Gears - 12 tooth - 25.4x12.7 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Face Width (FW): 19.050 mm    Type: Hubbed    Hub Diameter (D1): 19.050 mm    Hub Projection (HL): 12.700 mm    Locking Method: None    Quality: Commercial   
Part Number: G025B-012-V12-191-127-CG (Each)
1 Available Now | Further orders can be expected around Sun, Apr 26, 2026
$94.41 AUD
$113.29 AUD $94.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. Backorder if more than 1.