Linear Slides - Cross Roller Tables - Aluminium

13 Products in this selection
  • Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.
  • Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required.
  • Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles.
  • Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability.
  • Each table consists of a one piece base, a one piece table and a pair of linear bearings.
Travel Load Capacity Length Height and Width (A/B) Base Plate Thickness (C) Number of Hole (Base/Carriage) Indicative
Image
25.400
mm 		88
Kg 		54.991
mm 		27.991 / 59.995
mm 		8.992
mm 		4 / 2
mm 		1136386 | DT-221RS --- Linear - 25.4 mm x 88 Kg x 54.991 mm
Material: Aluminium    U / W / V / S: 35.0 / - / - / 40.0 mm    R: 10.008 mm    Base Thread: 8.33 x 5.00    Carriage Thread: 10-32 UNF x 10.49    P: 25.0    Hole Spacing from End (N): 27.5 mm   
Part Number: DT-221RS Linear - 25.4 mm x 88 Kg x 54.991 mm / Linear Slides
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Dec 22, 2024
$886.14 AUD
$886.14 AUD
Each
Travel Load Capacity Length Height and Width (A/B) Indicative
Image
25.400
mm 		88
Kg 		54.991
mm 		27.991 / 59.995
mm 		1136386 | DT-221RS --- Linear - 25.4 mm x 88 Kg x 54.991 mm
Material: Aluminium    Base Plate Thickness (C): 8.992 mm    Number of Hole (Base/Carriage): 4 / 2 mm    U / W / V / S: 35.0 / - / - / 40.0 mm    R: 10.008 mm    Base Thread: 8.33 x 5.00    Carriage Thread: 10-32 UNF x 10.49    P: 25.0    Hole Spacing from End (N): 27.5 mm   
Part Number: DT-221RS Linear - 25.4 mm x 88 Kg x 54.991 mm / Linear Slides
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Dec 22, 2024
$886.14 AUD
$886.14 AUD
Each
38.100
mm 		52
Kg 		65
mm 		15 / 30
mm 		4.064
mm 		4 / 6
mm 		1151942 | DT-202RS --- Linear - 38.1 mm x 52 Kg x 65 mm
Material: Aluminium    U / W / V / S: 55.0 / - / - / 22.0 mm    R: 5.004 mm    Base Thread: 5.03 x 3.18    Carriage Thread: 4-40 UNC x 4.50    P: 10.0    Hole Spacing from End (N): 17.5 mm   
Part Number: DT-202RS Linear - 38.1 mm x 52 Kg x 65 mm / Linear Slides
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Dec 22, 2024
$1,023.05 AUD
$1,023.05 AUD
Each
38.100
mm 		52
Kg 		65
mm 		15 / 30
mm 		1151942 | DT-202RS --- Linear - 38.1 mm x 52 Kg x 65 mm
Material: Aluminium    Base Plate Thickness (C): 4.064 mm    Number of Hole (Base/Carriage): 4 / 6 mm    U / W / V / S: 55.0 / - / - / 22.0 mm    R: 5.004 mm    Base Thread: 5.03 x 3.18    Carriage Thread: 4-40 UNC x 4.50    P: 10.0    Hole Spacing from End (N): 17.5 mm   
Part Number: DT-202RS Linear - 38.1 mm x 52 Kg x 65 mm / Linear Slides
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Dec 22, 2024
$1,023.05 AUD
$1,023.05 AUD
Each
38.100
mm 		52
Kg 		65
mm 		21 / 40
mm 		6.502
mm 		4 / 6
mm 		1151943 | DT-212RS --- Linear - 38.1 mm x 52 Kg x 65 mm
Material: Aluminium    U / W / V / S: 55.0 / - / - / 30.0 mm    R: 5.004 mm    Base Thread: 6.12 x 3.80    Carriage Thread: 6-32 UNC x 8.00    P: 15.0    Hole Spacing from End (N): 17.5 mm   
Part Number: DT-212RS Linear - 38.1 mm x 52 Kg x 65 mm / Linear Slides
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Dec 22, 2024
$914.95 AUD
$914.95 AUD
Each
38.100
mm 		52
Kg 		65
mm 		21 / 40
mm 		1151943 | DT-212RS --- Linear - 38.1 mm x 52 Kg x 65 mm
Material: Aluminium    Base Plate Thickness (C): 6.502 mm    Number of Hole (Base/Carriage): 4 / 6 mm    U / W / V / S: 55.0 / - / - / 30.0 mm    R: 5.004 mm    Base Thread: 6.12 x 3.80    Carriage Thread: 6-32 UNC x 8.00    P: 15.0    Hole Spacing from End (N): 17.5 mm   
Part Number: DT-212RS Linear - 38.1 mm x 52 Kg x 65 mm / Linear Slides
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Dec 22, 2024
$914.95 AUD
$914.95 AUD
Each
50.800
mm 		153
Kg 		105.004
mm 		27.991 / 59.995
mm 		8.992
mm 		4 / 6
mm 		1163729 | DT-222RS --- Linear - 50.8 mm x 153 Kg x 105.004 mm
Material: Aluminium    U / W / V / S: 85.0 / - / - / 40.0 mm    R: 10.008 mm    Base Thread: 8.33 x 5.00    Carriage Thread: 10-32 UNF x 10.49    P: 25.0    Hole Spacing from End (N): 27.5 mm   
Part Number: DT-222RS Linear - 50.8 mm x 153 Kg x 105.004 mm / Linear Slides
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Dec 22, 2024
$1,104.59 AUD
$1,104.59 AUD
Each
50.800
mm 		153
Kg 		105.004
mm 		27.991 / 59.995
mm 		1163729 | DT-222RS --- Linear - 50.8 mm x 153 Kg x 105.004 mm
Material: Aluminium    Base Plate Thickness (C): 8.992 mm    Number of Hole (Base/Carriage): 4 / 6 mm    U / W / V / S: 85.0 / - / - / 40.0 mm    R: 10.008 mm    Base Thread: 8.33 x 5.00    Carriage Thread: 10-32 UNF x 10.49    P: 25.0    Hole Spacing from End (N): 27.5 mm   
Part Number: DT-222RS Linear - 50.8 mm x 153 Kg x 105.004 mm / Linear Slides
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Dec 22, 2024
$1,104.59 AUD
$1,104.59 AUD
Each
50.800
mm 		195
Kg 		84.988
mm 		35.001 / 80.010
mm 		10.490
mm 		4 / 2
mm 		1163746 | DT-231RS --- Linear - 50.8 mm x 195 Kg x 84.988 mm
Material: Aluminium    U / W / V / S: 64.9 / - / - / 55.0 mm    R: 10.008 mm    Base Thread: 8.33 x 5.00    Carriage Thread: 10-32 UNF x 13.00    P: 40.0    Hole Spacing from End (N): 42.5 mm   
Part Number: DT-231RS Linear - 50.8 mm x 195 Kg x 84.988 mm / Linear Slides
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Dec 22, 2024
$1,162.05 AUD
$1,162.05 AUD
Each
50.800
mm 		195
Kg 		84.988
mm 		35.001 / 80.010
mm 		1163746 | DT-231RS --- Linear - 50.8 mm x 195 Kg x 84.988 mm
Material: Aluminium    Base Plate Thickness (C): 10.490 mm    Number of Hole (Base/Carriage): 4 / 2 mm    U / W / V / S: 64.9 / - / - / 55.0 mm    R: 10.008 mm    Base Thread: 8.33 x 5.00    Carriage Thread: 10-32 UNF x 13.00    P: 40.0    Hole Spacing from End (N): 42.5 mm   
Part Number: DT-231RS Linear - 50.8 mm x 195 Kg x 84.988 mm / Linear Slides
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Dec 22, 2024
$1,162.05 AUD
$1,162.05 AUD
Each
63.500
mm 		73
Kg 		94.996
mm 		21.006 / 40.005
mm 		6.502
mm 		8 / 10
mm 		1171042 | DT-214RS --- Linear - 63.5 mm x 73 Kg x 94.996 mm
Material: Aluminium    U / W / V / S: 85.0 / 55.0 / - / 30.0 mm    R: 5.004 mm    Base Thread: 6.12 x 3.80    Carriage Thread: 6-32 UNC x 8.00    P: 15.0    Hole Spacing from End (N): 17.5 mm   
Part Number: DT-214RS Linear - 63.5 mm x 73 Kg x 94.996 mm / Linear Slides
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Dec 22, 2024
$1,086.41 AUD
$1,086.41 AUD
Each
63.500
mm 		73
Kg 		94.996
mm 		21.006 / 40.005
mm 		1171042 | DT-214RS --- Linear - 63.5 mm x 73 Kg x 94.996 mm
Material: Aluminium    Base Plate Thickness (C): 6.502 mm    Number of Hole (Base/Carriage): 8 / 10 mm    U / W / V / S: 85.0 / 55.0 / - / 30.0 mm    R: 5.004 mm    Base Thread: 6.12 x 3.80    Carriage Thread: 6-32 UNC x 8.00    P: 15.0    Hole Spacing from End (N): 17.5 mm   
Part Number: DT-214RS Linear - 63.5 mm x 73 Kg x 94.996 mm / Linear Slides
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Dec 22, 2024
$1,086.41 AUD
$1,086.41 AUD
Each
76.200
mm 		90
Kg 		125
mm 		15 / 30
mm 		4.064
mm 		8 / 14
mm 		1178401 | DT-205RS --- Linear - 76.2 mm x 90 Kg x 125 mm
Material: Aluminium    U / W / V / S: 115.0 / 85.0 / - / 22.0 mm    R: 5.004 mm    Base Thread: 5.03 x 3.18    Carriage Thread: 4-40 UNC x 4.50    P: 10.0    Hole Spacing from End (N): 17.5 mm   
Part Number: DT-205RS Linear - 76.2 mm x 90 Kg x 125 mm / Linear Slides
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Dec 22, 2024
$1,261.86 AUD
$1,261.86 AUD
Each
76.200
mm 		90
Kg 		125
mm 		15 / 30
mm 		1178401 | DT-205RS --- Linear - 76.2 mm x 90 Kg x 125 mm
Material: Aluminium    Base Plate Thickness (C): 4.064 mm    Number of Hole (Base/Carriage): 8 / 14 mm    U / W / V / S: 115.0 / 85.0 / - / 22.0 mm    R: 5.004 mm    Base Thread: 5.03 x 3.18    Carriage Thread: 4-40 UNC x 4.50    P: 10.0    Hole Spacing from End (N): 17.5 mm   
Part Number: DT-205RS Linear - 76.2 mm x 90 Kg x 125 mm / Linear Slides
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Dec 22, 2024
$1,261.86 AUD
$1,261.86 AUD
Each
76.200
mm 		90
Kg 		125
mm 		21 / 40
mm 		6.502
mm 		8 / 14
mm 		1178402 | DT-215RS --- Linear - 76.2 mm x 90 Kg x 125 mm
Material: Aluminium    U / W / V / S: 115.0 / 85.0 / - / 30.0 mm    R: 5.004 mm    Base Thread: 6.12 x 3.80    Carriage Thread: 6-32 UNC x 8.00    P: 15.0    Hole Spacing from End (N): 17.5 mm   
Part Number: DT-215RS Linear - 76.2 mm x 90 Kg x 125 mm / Linear Slides
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Dec 22, 2024
$1,274.95 AUD
$1,274.95 AUD
Each
76.200
mm 		90
Kg 		125
mm 		21 / 40
mm 		1178402 | DT-215RS --- Linear - 76.2 mm x 90 Kg x 125 mm
Material: Aluminium    Base Plate Thickness (C): 6.502 mm    Number of Hole (Base/Carriage): 8 / 14 mm    U / W / V / S: 115.0 / 85.0 / - / 30.0 mm    R: 5.004 mm    Base Thread: 6.12 x 3.80    Carriage Thread: 6-32 UNC x 8.00    P: 15.0    Hole Spacing from End (N): 17.5 mm   
Part Number: DT-215RS Linear - 76.2 mm x 90 Kg x 125 mm / Linear Slides
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Dec 22, 2024
$1,274.95 AUD
$1,274.95 AUD
Each
76.200
mm 		272
Kg 		124.993
mm 		35.001 / 80.010
mm 		10.490
mm 		4 / 4
mm 		1178437 | DT-232RS --- Linear - 76.2 mm x 272 Kg x 124.993 mm
Material: Aluminium    U / W / V / S: 105.0 / - / - / 55.0 mm    R: 10.008 mm    Base Thread: 8.33 x 5.00    Carriage Thread: 10-32 UNF x 13.00    P: 40.0    Hole Spacing from End (N): 42.5 mm   
Part Number: DT-232RS Linear - 76.2 mm x 272 Kg x 124.993 mm / Linear Slides
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Dec 22, 2024
$1,217.68 AUD
$1,217.68 AUD
Each
76.200
mm 		272
Kg 		124.993
mm 		35.001 / 80.010
mm 		1178437 | DT-232RS --- Linear - 76.2 mm x 272 Kg x 124.993 mm
Material: Aluminium    Base Plate Thickness (C): 10.490 mm    Number of Hole (Base/Carriage): 4 / 4 mm    U / W / V / S: 105.0 / - / - / 55.0 mm    R: 10.008 mm    Base Thread: 8.33 x 5.00    Carriage Thread: 10-32 UNF x 13.00    P: 40.0    Hole Spacing from End (N): 42.5 mm   
Part Number: DT-232RS Linear - 76.2 mm x 272 Kg x 124.993 mm / Linear Slides
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Dec 22, 2024
$1,217.68 AUD
$1,217.68 AUD
Each
101.600
mm 		111
Kg 		180.010
mm 		27.991 / 59.995
mm 		8.992
mm 		4 / 12
mm 		1188915 | DT-224RS --- Linear - 101.6 mm x 111 Kg x 180.01 mm
Material: Aluminium    U / W / V / S: 160.0 / - / - / 40.0 mm    R: 10.008 mm    Base Thread: 8.33 x 5.00    Carriage Thread: 10-32 UNF x 10.49    P: 25.0    Hole Spacing from End (N): 27.5 mm   
Part Number: DT-224RS Linear - 101.6 mm x 111 Kg x 180.01 mm / Linear Slides
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Dec 22, 2024
$1,509.59 AUD
$1,509.59 AUD
Each
101.600
mm 		111
Kg 		180.010
mm 		27.991 / 59.995
mm 		1188915 | DT-224RS --- Linear - 101.6 mm x 111 Kg x 180.01 mm
Material: Aluminium    Base Plate Thickness (C): 8.992 mm    Number of Hole (Base/Carriage): 4 / 12 mm    U / W / V / S: 160.0 / - / - / 40.0 mm    R: 10.008 mm    Base Thread: 8.33 x 5.00    Carriage Thread: 10-32 UNF x 10.49    P: 25.0    Hole Spacing from End (N): 27.5 mm   
Part Number: DT-224RS Linear - 101.6 mm x 111 Kg x 180.01 mm / Linear Slides
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Dec 22, 2024
$1,509.59 AUD
$1,509.59 AUD
Each
101.600
mm 		482
Kg 		160.020
mm 		45.009 / 100.000
mm 		13.005
mm 		4 / 4
mm 		1188957 | DT-242RS --- Linear - 101.6 mm x 482 Kg x 160.02 mm
Material: Aluminium    U / W / V / S: 140.0 / - / - / 60.0 mm    R: 10.008 mm    Base Thread: 10.31 x 6.76    Carriage Thread: 1/4-20 UNC x 16.00    P: 50.0    Hole Spacing from End (N): 55.0 mm   
Part Number: DT-242RS Linear - 101.6 mm x 482 Kg x 160.02 mm / Linear Slides
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Dec 22, 2024
$1,970.23 AUD
$1,970.23 AUD
Each
101.600
mm 		482
Kg 		160.020
mm 		45.009 / 100.000
mm 		1188957 | DT-242RS --- Linear - 101.6 mm x 482 Kg x 160.02 mm
Material: Aluminium    Base Plate Thickness (C): 13.005 mm    Number of Hole (Base/Carriage): 4 / 4 mm    U / W / V / S: 140.0 / - / - / 60.0 mm    R: 10.008 mm    Base Thread: 10.31 x 6.76    Carriage Thread: 1/4-20 UNC x 16.00    P: 50.0    Hole Spacing from End (N): 55.0 mm   
Part Number: DT-242RS Linear - 101.6 mm x 482 Kg x 160.02 mm / Linear Slides
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Dec 22, 2024
$1,970.23 AUD
$1,970.23 AUD
Each
127.000
mm 		261
Kg 		205.003
mm 		27.991 / 59.995
mm 		8.992
mm 		8 / 14
mm 		1195696 | DT-225RS --- Linear - 127 mm x 261 Kg x 205.003 mm
Material: Aluminium    U / W / V / S: 185.0 / 85.0 / - / 40.0 mm    R: 10.008 mm    Base Thread: 8.33 x 5.00    Carriage Thread: 10-32 UNF x 10.49    P: 25.0    Hole Spacing from End (N): 27.5 mm   
Part Number: DT-225RS Linear - 127 mm x 261 Kg x 205.003 mm / Linear Slides
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Dec 22, 2024
$1,687.41 AUD
$1,687.41 AUD
Each
127.000
mm 		261
Kg 		205.003
mm 		27.991 / 59.995
mm 		1195696 | DT-225RS --- Linear - 127 mm x 261 Kg x 205.003 mm
Material: Aluminium    Base Plate Thickness (C): 8.992 mm    Number of Hole (Base/Carriage): 8 / 14 mm    U / W / V / S: 185.0 / 85.0 / - / 40.0 mm    R: 10.008 mm    Base Thread: 8.33 x 5.00    Carriage Thread: 10-32 UNF x 10.49    P: 25.0    Hole Spacing from End (N): 27.5 mm   
Part Number: DT-225RS Linear - 127 mm x 261 Kg x 205.003 mm / Linear Slides
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Dec 22, 2024
$1,687.41 AUD
$1,687.41 AUD
Each
152.400
mm 		726
Kg 		260.096
mm 		45.009 / 100.000
mm 		13.005
mm 		4 / 8
mm 		1201453 | DT-243RS --- Linear - 152.4 mm x 726 Kg x 260.096 mm
Material: Aluminium    U / W / V / S: 240.0 / - / - / 60.0 mm    R: 10.008 mm    Base Thread: 10.31 x 6.76    Carriage Thread: 1/4-20 UNC x 16.00    P: 50.0    Hole Spacing from End (N): 55.0 mm   
Part Number: DT-243RS Linear - 152.4 mm x 726 Kg x 260.096 mm / Linear Slides
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Dec 22, 2024
$2,641.23 AUD
$2,641.23 AUD
Each
152.400
mm 		726
Kg 		260.096
mm 		45.009 / 100.000
mm 		1201453 | DT-243RS --- Linear - 152.4 mm x 726 Kg x 260.096 mm
Material: Aluminium    Base Plate Thickness (C): 13.005 mm    Number of Hole (Base/Carriage): 4 / 8 mm    U / W / V / S: 240.0 / - / - / 60.0 mm    R: 10.008 mm    Base Thread: 10.31 x 6.76    Carriage Thread: 1/4-20 UNC x 16.00    P: 50.0    Hole Spacing from End (N): 55.0 mm   
Part Number: DT-243RS Linear - 152.4 mm x 726 Kg x 260.096 mm / Linear Slides
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Dec 22, 2024
$2,641.23 AUD
$2,641.23 AUD
Each