Gears - Spur - 24DP - 14.5 Degree - Brass

2 Products in this selection
  • PCD = No. of Teeth x 1.058mm (1/24 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.
  • FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.
  • 24 Diametrical Pitch. Approx 3.33mm between teeth.
Additional resources:
24DP Gear Racks
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Pitch Indicative
Image
18
Nr. 		19.05
mm 		4.762
mm 		21.158
mm 		6.35
mm 		24DP
 1118691 | G019B-18-V24-064-048-B-P --- Gears - 18 Teeth x 19.05 mm x 4.762 mm
Material: Brass    Hub Diameter (D1): 12.70 mm    Hub Projection (HL): 6.35 mm    Locking Method: No Set Screw    Pressure Angle: 14.5 Deg.    Quality: Commercial   
Part Number: G019B-18-V24-064-048-B-P Gears - 18 Teeth x 19.05 mm x 4.762 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$20.00 AUD
$0.00 AUD $20.00 AUD
Each
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
18
Nr. 		19.05
mm 		4.762
mm 		21.158
mm 		1118691 | G019B-18-V24-064-048-B-P --- Gears - 18 Teeth x 19.05 mm x 4.762 mm
Material: Brass    Face Width (FW): 6.35 mm    Pitch: 24DP    Hub Diameter (D1): 12.70 mm    Hub Projection (HL): 6.35 mm    Locking Method: No Set Screw    Pressure Angle: 14.5 Deg.    Quality: Commercial   
Part Number: G019B-18-V24-064-048-B-P Gears - 18 Teeth x 19.05 mm x 4.762 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$20.00 AUD
$0.00 AUD $20.00 AUD
Each
54
Nr. 		57.15
mm 		7.938
mm 		59.258
mm 		6.35
mm 		24DP
 1165043 | G057B-54-V24-064-079-B-P --- Gears - 54 Teeth x 57.15 mm x 7.938 mm
Material: Brass    Hub Diameter (D1): 17.46 mm    Hub Projection (HL): 7.94 mm    Locking Method: No Set Screw    Pressure Angle: 14.5 Deg.    Quality: Commercial   
Part Number: G057B-54-V24-064-079-B-P Gears - 54 Teeth x 57.15 mm x 7.938 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$25.00 AUD
$0.00 AUD $25.00 AUD
Each
54
Nr. 		57.15
mm 		7.938
mm 		59.258
mm 		1165043 | G057B-54-V24-064-079-B-P --- Gears - 54 Teeth x 57.15 mm x 7.938 mm
Material: Brass    Face Width (FW): 6.35 mm    Pitch: 24DP    Hub Diameter (D1): 17.46 mm    Hub Projection (HL): 7.94 mm    Locking Method: No Set Screw    Pressure Angle: 14.5 Deg.    Quality: Commercial   
Part Number: G057B-54-V24-064-079-B-P Gears - 54 Teeth x 57.15 mm x 7.938 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$25.00 AUD
$0.00 AUD $25.00 AUD
Each