Orings For Dental Applications


O-Rings for Dental Applications


O-Rings - Dental
O-Rings - Dental

Special Orings for Dental Applications.

Special Orings for Dental Applications.

Related Information:
Dental Handpiece Parts - Miscellaneous
Dental Bearings
Tools for Dental Handpiece Repair

Bearings for Dental Equipment


Bearings - Dental Applications
Bearings - Dental Applications

See Dental Handpiece Bearings and Orings for applications by model.

This listing is the basic features of various bearings for dental applications. Please contact us for a dental application list. See - Dental Handpiece Bearings and Orings for applications by model.


O-Rings


O-Rings - Nitrile Rubber
O-Rings - Nitrile Rubber

Also see combined categories:
All O-Rings

General purpose. Includes o-rings for dental handpiece applications.

Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.

Related Information:
U Groove Pulleys

O-Rings - Silicone Rubber
O-Rings - Silicone Rubber

Also see combined categories:
All O-Rings

High thermal resistance and cold flexibility. Some dental applications are included in the listings.

Temperature Range: -70oC to +200oC. Good dialectric properties and resistance to ozone and oxygen attack. Retains flexibility at high and low temperatures. Poor strength and tear resistance. Poor resistance to oils, fuels, concentrated acids and alkalis, water and steam.


You may also like

Dental Bearing Kits



Bearings Acetal


Bearings - Acetal - Disk Cleaning Applications
Bearings - Acetal - Disk Cleaning Applications

Also see combined categories:
All Plastic Single Row Bearings

Special acetal bearings for disk cleaning


Mounts Leveling


Mounts - Leveling - Hygienic - Anchoring - One Hole
Mounts - Leveling - Hygienic - Anchoring - One Hole

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.


Mounts - Leveling - Hygienic - Anchoring - Two Hole
Mounts - Leveling - Hygienic - Anchoring - Two Hole

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.


Channel


Channel - Brass
Channel - Brass

For general hobby applications.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Channel - Brass.

Gearmotors Open


Gearmotors - Open Gear
Gearmotors - Open Gear

Perfect for applications where inspection of the gears is important, educational purposes or for visual effects.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Gearmotors - Open Gear.

Mounts Leveling


Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel
Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Wrench flats in thread still allow for full use of threaded section. 12o swivel.


Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel
Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Wrench flats in thread still allow for full use of threaded section. 1o swivel.


Strip


Strip - Soft Metal Packs
Strip - Soft Metal Packs

For general hobby applications. This brass strip is annealed soft to make it easier to bend. Brass.

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Strip - Soft Metal Packs.

Tools Bending


Tools - Wire Working
Tools - Wire Working

Also see combined categories:
All Tools

For general hobby applications. Wire crimping and wire bending tools. Spring winder and spring looping.

Related Information:
Music Wire

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - Wire Working.

Nuts Specialty


Nuts - Square - Machine Screw
Nuts - Square - Machine Screw

For space limited applications. Metts or exceeds ANSI/ASME B18.6.3 standards


Spacers


Spacers - Round - Hobby
Spacers - Round - Hobby

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Non Metallic

Inexpensive nylon spacers for hobby applications


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Spacers - Round - Hobby.

Linear Slides


Rail Systems - Miniature Profile
Rail Systems - Miniature Profile

Also see combined categories:
All Linear Slides

Ideal for precision applications where mounting space is limited

Gothic arch grooves at raceway contacts enables slide to sustain loads & movement from any direction. Made from stainless steel or plastic for corrosion resistance. End caps have oil holes for easy relubrication.


Bumpers


Bumpers - Radial - Tube
Bumpers - Radial - Tube

These bumpers are designed for applications involving shock and collision protection along a straight line.

Made from TecsPaks patented elastomer. Less than 40D hardness. Mounting bolt not included.


Balls Plastic


Balls - Plastic - Polypropylene
Balls - Plastic - Polypropylene

Also see combined categories:
All Plastic Balls
All Non Metallic Balls

Excellent for liquid level float applications.

Tolerance and spherecity: up to and including 25.4mm diameter = +/-0.0508mm, over 25.4mm diameter +/-0.0762mm. Very resistant to most acids and alkalies. Excellent for liquid level float applications. Unpolished. Specific Gravity: 0.91.

Related Information:
AFBMA Ball Grades
Other Types of Balls

Castors Stud


Castors - Bolt - Utility
Castors - Bolt - Utility

Swivel Castors for light duty applications including wire baskets, display equipment and light trolley applications.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Castors - Bolt - Utility.

Engineering and Hobby Rod


Rod - Round - Aluminium
Rod - Round - Aluminium

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:
Aluminium Properties

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Rod - Round - Aluminium.

Rod - Round - Brass
Rod - Round - Brass

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:
Brass Properties

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Rod - Round - Brass.

Mounts Machinery


Mounts - Machinery - Industrial - Pneumatic Elastomeric
Mounts - Machinery - Industrial - Pneumatic Elastomeric

Also see combined categories:
All Industrial Machine Mounts

Well suited for applications requiring high deflection isolation. Vibration can be reduced as much as 90%. High stability horizontal to vertical stiffness ratio 1 to 1.

Heavy wall construction. Significant shock loads are deflected to the outer wall of the mount. Will not bottom out if properly installed. Will continue to support and isolateeven with no air pressure. Leveling is easily accomplished by adding or removing air.


Rollers


Rollers - Bearing - Nylon Covered
Rollers - Bearing - Nylon Covered

Also see combined categories:
All Tyred OD Bearings
All Rollers

Nylon tyred rollers for heavy duty applications

Nylon tyre (tire) covering a precision deep groove radial ball bearings.

Related Information:
See also Wheels

Hooks


Turnbuckles - Midget - Eye to Eye
Turnbuckles - Midget - Eye to Eye

Also see combined categories:
All Turn Buckles

Economy turnbuckles for light duty applications. Sand cast aluminium bodies.

Hex necks. Electro galvanised eyes.

Related Information:
See also Dubro micro turnbuckle for hobby applications DUBRO300

Turnbuckles - Midget - Hook to Eye
Turnbuckles - Midget - Hook to Eye

Also see combined categories:
All Turn Buckles

Economy turnbuckles for light duty applications. Sand cast aluminium bodies.

Hex necks. Electro galvanised hooks.

Related Information:
See also Dubro micro turnbuckle for hobby applications DUBRO300

Engineering and Hobby Rod


Rod - Round - Stainless Steel
Rod - Round - Stainless Steel

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:
Stainless Steel Properties

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Rod - Round - Stainless Steel.

Tube and Tubing


Tube - Round - Soft Metal Packs
Tube - Round - Soft Metal Packs

Also see combined categories:
All Soft Metal Packs

For general hobby applications. This tube is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tube - Round - Soft Metal Packs.

Robotic Wheels


Wheels - Robotic - Motorised
Wheels - Robotic - Motorised

Also see combined categories:
All Wheels

Motorised wheels for robotic and other applications

See also tracks for robotic applications.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Wheels - Robotic - Motorised.

Tools Circlip


Tools - E-Clip Applicators
Tools - E-Clip Applicators

Also see combined categories:
All Tools

Assists with assembly e-clip application. Each tool is designed to suit one or two sizes only.


Mounts Leveling


Mounts - Leveling - Thermoplastic
Mounts - Leveling - Thermoplastic

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Economical choice for a wide range of applications. Adjusters.

Base is made from reinforced thermoplastic. Threaded stem is steel. Optional non skid rubber pads available separately.

Related Information:
Rubber base pads to suit

Spring Mounts


Springs - Urethane
Springs - Urethane

Also see combined categories:
All Rubber Springs

Urethane springs are designed for use in applications where corrosion, vibration or magnetism prevent the use of conventional steel springs.

They replace steel coil springs in medium pressure applications involving space limitations, high blank holding pressure and adequate stripping. Durometer 95 shore A. Colour black. Tensile strength 5000 psi. Temperature range minus 40 to 80 oC.


Castors Plate


Castors - Plate - Utility
Castors - Plate - Utility

Also see combined categories:
All Plate Type Castors

Swivel and Rigid Castors for Light duty applications. Plate mounted type.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Castors - Plate - Utility.

Hobby Wheels


Wheels - Hobby - General
Wheels - Hobby - General

Also see combined categories:
All Wheels

Includes wheels for robots and general hobby applications

Also see tracks for Robotic applications.

Related Information:
See also Rollers

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Wheels - Hobby - General.

Engineering and Hobby Rod


Rod - Round - Soft Metal Packs
Rod - Round - Soft Metal Packs

Also see combined categories:
All Soft Metal Packs

For general hobby applications. This rod is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Rod - Round - Soft Metal Packs.

Sheet Metallic


Sheet - Aluminium - T1100
Sheet - Aluminium - T1100

Also see combined categories:
All Sheet
All Aluminium Sheet

Non precision inexpensive aluminium sheet for hobby applications. Heat-treated T1100 grade.

Sheet for applications not requiring absolute precision. Thickness tolerances +/- 0.1mm. Lengths and widths will be at least that specified but may be more.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Sheet - Aluminium - T1100.

Sheet - Aluminium - T7075
Sheet - Aluminium - T7075

Also see combined categories:
All Sheet
All Aluminium Sheet

Non precision inexpensive aluminium sheet for hobby applications. Heat-treated T7075 grade.

Sheet for applications not requiring absolute precision. Thickness tolerances +/- 0.1mm. Lengths and widths will be at least that specified but may be more.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Sheet - Aluminium - T7075.

Tube and Tubing


Tube - Round - Aluminium
Tube - Round - Aluminium

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:
Tube Working Tools
Aluminium Properties

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tube - Round - Aluminium.

Tube - Round - Brass
Tube - Round - Brass

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:
Tube Working Tools
Brass Properties

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tube - Round - Brass.

Tube - Round - Copper
Tube - Round - Copper

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:
Tube Working Tools

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tube - Round - Copper.

Tube - Square - Aluminium
Tube - Square - Aluminium

Also see combined categories:
All Metal Tube - Square

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:
Aluminium Properties

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tube - Square - Aluminium.

Tube - Square - Brass
Tube - Square - Brass

Also see combined categories:
All Metal Tube - Square

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:
Brass Properties

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tube - Square - Brass.

Gearboxes Inline


Gearboxes - Inline - 114 x 90mm
Gearboxes - Inline - 114 x  90mm

Also see combined categories:
All Inline Gearboxes

NT121 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Gearboxes - Inline - 120 x 103mm
Gearboxes - Inline - 120 x 103mm

Also see combined categories:
All Inline Gearboxes

NTB121 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 1.63/3.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Gearboxes - Inline - 120 x 120mm
Gearboxes - Inline - 120 x 120mm

Also see combined categories:
All Inline Gearboxes

NT122 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Gearboxes - Inline - 120 x 160mm
Gearboxes - Inline - 120 x 160mm

Also see combined categories:
All Inline Gearboxes

NTB122 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 4/5kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Gearboxes - Inline - 50 x 30mm
Gearboxes - Inline -  50 x  30mm

Also see combined categories:
All Inline Gearboxes

J51 Series.

End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3o - 6o. Approx Motion: J51-10 = 2o30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Gearboxes - Inline - 50 x 40mm
Gearboxes - Inline -  50 x  40mm

Also see combined categories:
All Inline Gearboxes

J52 Series.

End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Gearboxes - Inline - 50 x 50mm
Gearboxes - Inline -  50 x  50mm

Also see combined categories:
All Inline Gearboxes

J53 Series.

Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Gearboxes - Inline - 60 x 56mm
Gearboxes - Inline -  60 x  56mm

Also see combined categories:
All Inline Gearboxes

NT61 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Gearboxes - Inline - 60 x 70mm
Gearboxes - Inline -  60 x  70mm

Also see combined categories:
All Inline Gearboxes

NT62 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Gearboxes - Inline - 60 x 84mm
Gearboxes - Inline -  60 x  84mm

Also see combined categories:
All Inline Gearboxes

NT63 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Gearboxes - Inline - 63 x 40mm
Gearboxes - Inline -  63 x  40mm

Also see combined categories:
All Inline Gearboxes

J64 Series.

End Caps: Aluminium. Centre Body: Black Delrin. Gear: 817M40 (EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Gearboxes - Inline - 63 x 50mm
Gearboxes - Inline -  63 x  50mm

Also see combined categories:
All Inline Gearboxes

J65 Series.

End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Gearboxes - Inline - 63 x 60mm
Gearboxes - Inline -  63 x  60mm

Also see combined categories:
All Inline Gearboxes

J66 Series.

End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Gearboxes - Inline - 90 x 74mm
Gearboxes - Inline -  90 x  74mm

Also see combined categories:
All Inline Gearboxes

NT91 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Gearboxes - Inline - 90 x 94mm
Gearboxes - Inline -  90 x  94mm

Also see combined categories:
All Inline Gearboxes

NT92 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Bearings Ceramic


Bearings - Ceramic Si3N4 - Radial
Bearings - Ceramic Si3N4 - Radial

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Excellent performance in electrical and magnetism sensitive applications, including cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:
See also Zirconia Ceramic Bearings

Bearings - Ceramic ZrO2 - Radial
Bearings - Ceramic ZrO2 - Radial

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Excellent performance in electrical and magnetism sensitive applications, including cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:
See also Silicon Nitride Ceramic Bearings

Plungers Indexing


Plungers - Indexing - Cam Action - With Hex Nut
Plungers - Indexing - Cam Action - With Hex Nut

Also see combined categories:
All Indexing Plungers

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.

Related Information:
Mounting Blocks

Plungers - Indexing - Cam Action - Without Hex Nut
Plungers - Indexing - Cam Action - Without Hex Nut

Also see combined categories:
All Indexing Plungers

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.

Related Information:
Mounting Blocks

Linear Bearings


Bearings - Linear - Sliding - Ceramic Coated
Bearings - Linear - Sliding - Ceramic Coated

Also see combined categories:
All Sliding Linear Bearings

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Minimum shaft hardness RC35. Max PV 40,000. Temperature range -125 oC to +226 Deg C. Max static PSI 5000.


Tube and Tubing


Tube - Round - Stainless Steel
Tube - Round - Stainless Steel

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:
Tube Working Tools
Stainless Steel Properties

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tube - Round - Stainless Steel.

Hobby Servo Motors


Servo Motor - Brackets
Servo Motor - Brackets

Also see combined categories:
All Servo Accessories

Brackets to suit servo motors for robotic applications


Handpiece Parts


Dental Handpiece Parts - Other
Dental Handpiece Parts - Other

A list of additional parts available for handpieces. Also see category Dental Handpiece Parts.

This category contains miscellaneous dental parts excluding tools, bearings and o-rings. Parts for specific handpiece models can be found under the brand name on the internet store main index.

Related Information:
Dental O-Rings
Dental Bearings
Tools for Dental Handpiece Repair

Bearings Ceramic


Bearings - Ceramic Si3N4 - Angular Contact
Bearings - Ceramic Si3N4 - Angular Contact

Also see combined categories:
All Angular Contact Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Excellent performance in electrical and magnetism sensitive applications, including cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:
See also Zirconia Ceramic Bearings

Bearings One Way Clutch


Bearings - One Way - Sprag - Standard
Bearings - One Way - Sprag - Standard

Also see combined categories:
All One Way Clutch Bearings

Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.

Designed for press fit installation. Correct interference dimensions must be maintained to obtain maximum bearing and clutch performance. Mount the clutch ensuring that the shaft drive directionis in the direction indicated by the arrow on the inner race. To install, use a press tool / do not hammer or apply other stock to clutch. Make sure housing has enough strength to withstand press required for fitting installation. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes.

Related Information:
Precision Shafting To Suit Bearings

Plungers Ball


Plungers - Ball - Threaded - Acetal Body and Nylon Ball
Plungers - Ball - Threaded - Acetal Body and Nylon Ball

Also see combined categories:
All Threaded Ball Plungers

For use in plastic applications or when the application requires as few metal parts as possible.

Electrical isolation. Highly durable acetal body with stainless steel spring allows use in corrosive environments. Plunger wrenches will not work with these.


Gearboxes Inline


Gearboxes - Inline - 27 x 45mm
Gearboxes - Inline -  27 x  45mm

Also see combined categories:
All Inline Gearboxes

J27 Series. Miniature gearbox.

Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Weight: 60g. Backlash: Depends on ratio. Hours Life: 12000 hr. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Gearboxes - Inline - 50 x 40mm Hi Torque
Gearboxes - Inline -  50 x  40mm Hi Torque

Also see combined categories:
All Inline Gearboxes

JHD51 Series.

Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3o - 6o. Approx Motion: JHD51-10 = 2o30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Mounts Leveling


Mounts - Leveling - Padded - Light Duty - With Elastomer Pads
Mounts - Leveling - Padded - Light Duty - With Elastomer Pads

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

For light duty leveling applications. Can be used on furniture, light duty machines, tables, cabinets, light weight equipment etc. Adjusters.

For non skid applications.


Mounts - Leveling - Padded - Light Duty - With Nylon Pads
Mounts - Leveling - Padded - Light Duty - With Nylon Pads

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

For light duty leveling applications. Can be used on furniture, light duty machines, tables, cabinets, light weight equipment etc. Adjusters.

For glide applications.


Bearings Single Row Ball


Bearings - Ball - High Speed Cage
Bearings - Ball - High Speed Cage

Also see combined categories:
All Radial Ball Bearings

Bearings with cages for high speed applications, including phenolic, nylon and polyamide.

Bearings in this listing have various types of high speed cages. Speed ratings range from 20 percent to 80 percent increase on standard cage types. Please contact us for a data sheet on the specific size you require. Items with high speed cages have the suffixes T9H, TNH, TW or KC. This category does not include ceramic hybrid bearings with high speed cages. These are listed under Bearings - Ceramic Hybrid.

Related Information:
Tolerances
Skating and Fishing FAQ
Precision Shafting To Suit Bearings

Pressure Rollers


Bearings - Pressure Roller - With Urethane OD
Bearings - Pressure Roller - With Urethane OD

Also see combined categories:
All Tyred OD Bearings
All Rollers

Bearings with Urethane Tyre on OD for applications requiring frictional movement.

For applications including paper and card dispensing and rolling (eg ATM Machines).

Related Information:
Precision Shafting To Suit Bearings

Lifting Chain


Chain - Grade 50 Lifting - 316L Stainless Steel
Chain - Grade 50 Lifting - 316L Stainless Steel

Also see combined categories:
All Lifing Chain

Commonly used for commercial and marine applications. Approved for lifting.

Working loads are based on gradual pull not shock loads. Ensure all components in your assembly are overhead lifting rated and have the same working loads.


Ball Transfers


Ball Transfer Units - Screw Stem - Stainless - Precision
Ball Transfer Units - Screw Stem - Stainless - Precision

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


Ball Transfer Units - Screw Stem - Steel - Precision
Ball Transfer Units - Screw Stem - Steel - Precision

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


Bearings Ceramic


Bearings - Ceramic ZrO2 - Self Aligning - Double Row
Bearings - Ceramic ZrO2 - Self Aligning - Double Row

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Excellent performance in electrical and magnetism sensitive applications, including cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:
See also Silicon Nitride Ceramic Bearings
See other zirconia ceramic bearings

Clips


Snap Rings - Internal - Basic
Snap Rings - Internal - Basic

Also see combined categories:
All Internal Snaprings

M2300 / SB / ESB Snaprings. Like an internal circlip without the lugs.

Applications include gear systems, securing needle bearings and to act as spacers. Used on the inside bore diameter of a housing or similar.


Kites


Connectors - Edge - Kite
Connectors - Edge - Kite

Edge connectors for kite rods and tubes. Can be used for other applications requiring an angled join of rod or tubing. Not a precision item.

Joiners and connectors suitable for rod and tubing as well as for kites.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Connectors - Edge - Kite.

Lifting Chain


Chain - Grade 40 High Test - 316L Stainless Steel
Chain - Grade 40 High Test - 316L Stainless Steel

Also see combined categories:
All Link Chain

Commonly used for commercial and marine applications. Not for lifting.


Tooling Balls


Balls - Inspection
Balls - Inspection

Also see combined categories:
All Fixture and Checking Balls

Premium short shank inspection balls are used as reference points for inspection applications in conjunction with coordinate measuring machines to accurately measure the workpiece.

Made from case hardened 8620 steel. Concentricity of ball to shank is 0.00254mm (0.0001 in.) TIR.


Ball Transfers


Ball Transfer Units - Screw Stem - Brass and Aluminium
Ball Transfer Units - Screw Stem - Brass and Aluminium

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


Bearings Special Purpose


Bearings - Gothic Groove Profile OD
Bearings - Gothic Groove Profile OD

Bearings with a Gothic Groove in OD. Round Track Rolling Applications.

Type GP : Single Row of Balls (Radial). Type DWRAGP : Double Row of Balls (Angular Contact) - Extended Inner Ring. Type DRAGP : Double Row of Balls (Angular Contact) - Flush Inner Ring.

Related Information:
Precision Shafting To Suit Bearings

Clamps


Clamp Kits - Timing Belt
Clamp Kits - Timing Belt

Used for locking the ends of timing belt lengths used in linear applications

Suits single sided belts only. Aluminium. Screws, hex nuts and washers included.

Related Information:

Linear Bearings with Housing


Housings - Linear - Pillow Block - Closed - Ceramic Coated
Housings - Linear - Pillow Block - Closed - Ceramic Coated

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. DO NOT USE WD-40 or Silcone based spray lubricants.


Belts Poly Vee


Belts - Poly V - J Section
Belts - Poly V - J Section

Belts include a tensile cord, most suited for industrial or adjustable applications

Poly V are ideal for high ratio and high speed drives. J Section is 2.34mm pitch and 3.56mm belt height. Note, this series is not a strechable type of belt.


Pulleys Timing AT10 10mm



Pulleys Timing AT5 5mm


Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - AT5 - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

HTD 5mm series Flanges can be used with this stock.

Related Information:
Belts to suit 5.000 Pitch AT Pulleys
Aluminium Flanges to suit AT 5mm series pulley stock
Steel Flanges to suit AT 5mm series pulley stock

Pulleys Timing GT2 2mm


Pulleys - Timing - 2.000mm Pitch - GT2 - STOCK - Aluminium
Pulleys - Timing -  2.000mm Pitch - GT2 - STOCK - Aluminium

Also see combined categories:
All 2mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

Related Information:
Belts to suit 2.000 Pitch GT Pulleys
Flanges to suit GT 2mm series pulley stock

Pulleys Timing GT2 3mm


Pulleys - Timing - 3.000mm Pitch - GT2 - STOCK - Aluminium
Pulleys - Timing -  3.000mm Pitch - GT2 - STOCK - Aluminium

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

Related Information:
Belts to suit 3.000 Pitch GT Pulleys
Flanges to suit GT 3mm series pulley stock

Pulleys Timing GT2 5mm



Pulleys Timing H Pitch 12.7mm


Pulleys - Timing - 12.700mm Pitch - H - STOCK - Aluminium
Pulleys - Timing - 12.700mm Pitch - H - STOCK - Aluminium

Also see combined categories:
All H 12.7mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

Related Information:
Flanges to suit H series pulley stock

Pulleys Timing HTD 3mm


Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium
Pulleys - Timing -  3.000mm Pitch - HTD - STOCK - Aluminium

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

Related Information:
Belts to suit 3.000 Pitch HTD Pulleys
Flanges to suit HTD 3mm series pulley stock

Pulleys Timing HTD 5mm



Pulleys Timing HTD 8mm



Pulleys Timing L Pitch 9.53mm



Pulleys Timing MXL Pitch


Pulleys - Timing - 2.032mm Pitch - MXL - STOCK - Aluminium
Pulleys - Timing -  2.032mm Pitch - MXL - STOCK - Aluminium

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

2.032mm metric is equivalent to 0.080 pitch imperial.

Related Information:
Belts to suit 2.032 Pitch MXL Pulleys - 8mm wide
Flanges to suit MXL series pulley stock

Pulleys Timing T10 10mm


Pulleys - Timing - 10.000mm Pitch - T10 - STOCK - Aluminium
Pulleys - Timing - 10.000mm Pitch - T10 - STOCK - Aluminium

Also see combined categories:
All 10mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

Related Information:
Belts to suit 10.000 Pitch T Pulleys
Aluminium Flanges to suit T10 series pulley stock
Steel Flanges to suit T10 series pulley stock

Pulleys Timing T2.5 2.5mm


Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium
Pulleys - Timing -  2.500mm Pitch - T2.5 - STOCK - Aluminium

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

Related Information:
Belts to suit 2.500 Pitch T Pulleys
Flanges to suit T2.5 series pulley stock


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  




Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top






Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 126266 products in 2937 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.