tools general purpose categories


Category Matches

Shafting General Purpose

TopHide Pictures

Rod - Drill Blanks
Rod - Drill Blanks

Search Rating: 100%

Also see combined categories:
All Silver Steel Drill Blanks
All Drill Rod

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.


Bar and Rod

TopHide Pictures

Tool Steel - 496 Oil Hardening - Flat Stock
Tool Steel - 496 Oil Hardening - Flat Stock

Search Rating: 99%

General purpose tool steel with good wear resistance, durability and machinability

Dimensionally stable chromium, tungsten and vanadium electric furnace toolsteel can be used for intricate work. Low 787 to 815 oC (1450-1500 F) hardening range makes it easy to harden. Fully spheroidised and annealed for uniform carbide size and easy machining. Each piece is individually wrapped and clearly marked with size, analysis and correct hardness and tempering information. Edge squareness 0.003 mm per mm. Finish is 0.0008mm (0.000032 inch).


Shafting General Purpose

TopHide Pictures

Rod - Drill - Oil Hardening - 480 Series
Rod - Drill - Oil Hardening - 480 Series

Search Rating: 97%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

General purpose tool steel with good wear resistance, toughness and machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Rod - Drill - O-1 Oil Hardening
Rod - Drill - O-1 Oil Hardening

Search Rating: 82%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

For general toolroom use. Good non-deforming characteristics. Moderate resistance to abrasion. 90 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Castors Plate

TopHide Pictures

Castors - Plate - General Purpose - Fixed
Castors - Plate - General Purpose - Fixed

Search Rating: 81%

Also see combined categories:
All Plate Type Castors


Castors - Plate - General Purpose - Swivel
Castors - Plate - General Purpose - Swivel

Search Rating: 81%

Also see combined categories:
All Plate Type Castors


Castors - Plate - General Purpose - Swivel with Brake
Castors - Plate - General Purpose - Swivel with Brake

Search Rating: 81%

Also see combined categories:
All Plate Type Castors


Lubricants General Purpose

TopHide Pictures

Lubricants - General
Lubricants - General

Search Rating: 81%

Various brands and types. Includes Inox, Lanox, Anti-Seize, Cutting Fluid, Chain Lube, Moly Lube, Food Grade Grease, PTFE Lubes, Silicone and more

Some items in this category are marked as only available for collection. Includes high temperature and food grade lubes. Battery Conditioner - Oils - Moisture Inhibitor - WD - Valve and Oring Lubricant.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Lubricants - General.

Castors Stud

TopHide Pictures

Castors - Stud - Threaded - General Purpose - Swivel
Castors - Stud - Threaded - General Purpose - Swivel

Search Rating: 80%

Also see combined categories:
All Stud Type Castors


Shafting General Purpose

TopHide Pictures

Rod - Drill - General
Rod - Drill - General

Search Rating: 80%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Chrome vanadium alloy with unfinished ends. Requires heat treating to harden. Small diameters may not be perfectly straight. Heat treating by air, water or oil.

Related Information:

Castors Stud

TopHide Pictures

Castors - Stud - Friction Ring - General Purpose - Swivel
Castors - Stud - Friction Ring - General Purpose - Swivel

Search Rating: 79%

Also see combined categories:
All Stud Type Castors


Isolators

TopHide Pictures

Mounts - Vibration - Isolation Pads - General Purpose
Mounts - Vibration - Isolation Pads - General Purpose

Search Rating: 79%

Also see combined categories:
All Isolation Pad Mounts

For installation of industrial machinery where the ratio of shear loads to vertical loads is less than or equal to 1 to 5.

Base is unthreaded. The stud rests on the pad and is not threaded in or fastened to the pad. Self aligning feature compensates for uneven floors without sacrificing stability. Scientifically designed diamond suction cells of the neoprene insert firmly anchor the machine to the floor. Recommended for a wide range of industrial machinery and equipment where simple precise leveling is required. 25.4mm level adjustment.


Magnets Alnico

TopHide Pictures

Magnets - Alnico - Horseshoe
Magnets - Alnico - Horseshoe

Search Rating: 79%

Also see combined categories:
All Magnets
All Alnico Magnets

General purpose horseshoe magnet


Shafting General Purpose

TopHide Pictures

Shafting - Carbon Steel - Keyed
Shafting - Carbon Steel - Keyed

Search Rating: 79%

Also see combined categories:
All Shafting
All Steel Shafting

Keyways are cut full length of each bar. Low carbon steel C1018. Good case hardening properties.

Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00. Unhardened carbon steel. Special order may be available for stainless steel, other diameters, other lengths. Please ask.


Shafting - Unground - Silver Steel
Shafting - Unground - Silver Steel

Search Rating: 79%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

Unhardened silversteel shafting for general purposes. Not suitable for precision bearings until machined to correct tolerances and hardened.

See also drill rod. Drill Rod.

Related Information:

Hooks

TopHide Pictures

Slings - Wire Rope - Permaloc
Slings - Wire Rope - Permaloc

Search Rating: 78%

For general purpose lifting in environments too rugged for synthetic slings. Tuff-Tag identification on every sling for capacity ratings.


O-Rings

TopHide Pictures

O-Rings - Nitrile Rubber
O-Rings - Nitrile Rubber

Search Rating: 78%

Also see combined categories:
All O-Rings

General purpose.

Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.

Related Information:

Shafting General Purpose

TopHide Pictures

Shafts - Flexible - Panel Mount - Cased
Shafts - Flexible - Panel Mount - Cased

Search Rating: 78%

Also see combined categories:
All Flexible Panel Mount Shaft

See PDF file at bottom of internet page for Performance Data.

Related Information:

Shafts - Flexible - Panel Mount - Open
Shafts - Flexible - Panel Mount - Open

Search Rating: 78%

Also see combined categories:
All Flexible Panel Mount Shaft

See PDF file at bottom of internet page for Performance Data.

Related Information:

Bushes Plastic

TopHide Pictures

Bushes - Plastic - Iglidur G - Flanged
Bushes - Plastic - Iglidur G - Flanged

Search Rating: 78%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

General purpose maintenance free dry running.

Specific Gravity 1.45 g/cm3. Operating Temp 220 C short term / 130 C long term. Tensile Strength at 20 oC 210 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerances is E10 after H7 Pressfit. Tolerances listed in the tables take this into account.

Related Information:

Bushes - Plastic - Iglidur G - Unflanged
Bushes - Plastic - Iglidur G - Unflanged

Search Rating: 78%

Also see combined categories:
All Plastic Bushes
All Unflanged Plastic Bushes

General purpose maintenance free dry running.

Specific Gravity 1.45 g/cm3. Operating Temp 220 C short term / 130 C long term. Tensile Strength at 20 oC 210 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerances is E10 after H7 Pressfit. Tolerances listed in the tables take this into account.

Related Information:

Shafting General Purpose

TopHide Pictures

Rod - Drill - A-2 Air Hardening
Rod - Drill - A-2 Air Hardening

Search Rating: 78%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Air hardening. Maximum abrasion resistance. 65 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Rod - Drill - S-7 Air Hardening
Rod - Drill - S-7 Air Hardening

Search Rating: 78%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Air hardening molybdenum, chromium, shock resisting. High impact strength with moderate wear resistance. 95 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Rod - Drill - W-1 Water Hardening
Rod - Drill - W-1 Water Hardening

Search Rating: 78%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

High abrasion resistance and high toughness when hardened. 100 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Oil Seals

TopHide Pictures

Oil Seals - Nitrile Rubber
Oil Seals - Nitrile Rubber

Search Rating: 77%

Also see combined categories:
All Oil Seals

DIN 3760 - General purpose grease and oil sealing. Note - metal cased and rubber cased seals may be interchanged at our discretion. If one or the other is specifivally required please let us know when ordering.

Operating Temp. Range: -30oC to +90oC. The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.


Tools General

TopHide Pictures

Tools - General
Tools - General

Search Rating: 64%

Also see combined categories:
All Tools

Butane Torch, Inspection Mirror, Mini Sandblaster, Nibbling Tool, Plastic Scriber, Pick Up Tool Set, Hex Driver Handle for Insert Bits

X-Acto Knife Sets - Pin Vises - Screw Pitch Gauges and more.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - General.

Heatshrink
Heatshrink

Search Rating: 64%

Includes Dubro Range.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Heatshrink.

Sets

TopHide Pictures

Tools - Sets
Tools - Sets

Search Rating: 64%

Also see combined categories:
All Tools

General tool sets, screwdriver sets, tap sets, dies sets, hex key sets.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - Sets.

Tools General

TopHide Pictures

Tools - Drills
Tools - Drills

Search Rating: 64%

Also see combined categories:
All Tools

Hobby drill for very small bits.


Tools - Dubro
Tools - Dubro

Search Rating: 64%

Also see combined categories:
All Tools

Dubro Range of Tools


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - Dubro.

Tools - Paint
Tools - Paint

Search Rating: 64%

Also see combined categories:
All Tools

Includes airbrush, compressor, brushes, paint stand and alligator clips.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - Paint.

Tools - Pliers
Tools - Pliers

Search Rating: 64%

Also see combined categories:
All Tools

Pliers, multi tool.

Lengths shown are based on standard stock but may vary.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - Pliers.

Tools - Punches
Tools - Punches

Search Rating: 64%

Also see combined categories:
All Tools

Number punch and letter punch sets

Lengths shown are based on standard stock but may vary.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - Punches.

Tools - Tweezers
Tools - Tweezers

Search Rating: 64%

Also see combined categories:
All Tools

Selection of tweezers for those fiddly jobs.


Tools - Wrenches
Tools - Wrenches

Search Rating: 64%

Also see combined categories:
All Tools

Lengths shown are based on standard stock but may vary.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - Wrenches.

Tools - Chain Breaker
Tools - Chain Breaker

Search Rating: 63%

Also see combined categories:
All Tools

Used to break roller chain at the pins


Tools - Gift Ideas
Tools - Gift Ideas

Search Rating: 63%

Includes Stylus, Magnetic Finder, Multitool, Laser Pointers


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - Gift Ideas.

Tools - Nut Drivers
Tools - Nut Drivers

Search Rating: 63%

Also see combined categories:
All Tools

Includes socket wrench for 0-80 size screws

Lengths shown are based on standard stock but may vary.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - Nut Drivers.

Tools - Pin Vises
Tools - Pin Vises

Search Rating: 63%

Also see combined categories:
All Tools

Lengths shown are based on standard stock but may vary.


Tools - Nut Driver Set
Tools - Nut Driver Set

Search Rating: 63%

Also see combined categories:
All Tools

Lengths shown are based on standard stock but may vary.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - Nut Driver Set.

Tools Bending

TopHide Pictures

Tools - Wire Working
Tools - Wire Working

Search Rating: 63%

Also see combined categories:
All Tools

For general hobby applications. Wire crimping and wire bending tools. Spring winder and spring looping.

Related Information:

Tools General

TopHide Pictures

Tools - Body and Post Reamers
Tools - Body and Post Reamers

Search Rating: 63%

Also see combined categories:
All Tools

Body reamers, antenna post reamers

Lengths shown are based on standard stock but may vary.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - Body and Post Reamers.

Tape

TopHide Pictures

Tape - Silicone Wrap
Tape - Silicone Wrap

Search Rating: 43%

Also see combined categories:
All Tape

Self fusing silicone wrapping tape for emergency repairs or general protection. Seals leaks. Permanent. Self Bonding. No adhesive. Supa Tape.

Resists Fuels, Oils, Acid, Solvent, Salt Water, Road Salt and UV Rays. Temp Range minus 50 oC to plus 260 deg C. Insulates 8000 Volts (per unstretched layer). Tensile Strength 700psi. Lasts for years with a permanent air tight and water tight seal. Some uses include emergency radiator hose repair, insulation for radioactive areas, garden hose repair, exhaust pipe repair, electrical insulation, tool grips, sporting grips, rope ends, air duct joints, wire bundles. Areas of use include outdoor, auto, marine, workshop, motorcycle, camper, hunting, fishing, farming, plumbing, corrosive areas.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tape - Silicone Wrap.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 124109 products in 3085 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.