Spring Damped Mounts Categories
- from Small Parts and Bearings

Springs - Neoprene

Search Rating: 100%

Also see combined categories:
All Rubber Springs

Neoprene elastomer springs have proven to be the safest, most efficient material for punching, stamping and drawing dies.

Major advantages include high loads, increased durability, better performance, no maintenance and long life.

Springs - Urethane

Search Rating: 100%

Also see combined categories:
All Rubber Springs

Urethane springs are designed for use in applications where corrosion, vibration or magnetism prevent the use of conventional steel springs.

They replace steel coil springs in medium pressure applications involving space limitations, high blank holding pressure and adequate stripping. Durometer 95 shore A. Colour black. Tensile strength 5000 psi. Temperature range minus 40 to 80 ^oC.

Springs - Constant Force

Search Rating: 100%

301 Stainless Steel

Mounting hole specifications will be supplied on request. These springs are usually mounted on a drum and the free end attached to a loading force like a counterbalance. Free ID may vary to meet load specification. Load capacity can be increased by using multiple strips in tandem, back to back or laminated. Be sure to leave at least 40mm coiled on the drum at full extension. The spring ID will wrap tightly on the drum so that most applications require no fastening to the drum.

Spring Motors - RINO

Search Rating: 100%

Also see combined categories:
All Spring Motors

301 stainless Steel. Shipped as shown to be mounted on drums (not supplied) of the recommended diameters. Torque ratings listed are for the unwinding portion of the cycle. Torque at fully wound end of cycle will be slightly higher.

Reels - Spring Powered - Base Mounted - Steel

Search Rating: 99%

Also see combined categories:
All Spring Reels

Used in counterbalances, door closers, cable retractors, hose retreivers, tool head returns, cabinets and furniture.

Latches - Spring Loaded

Search Rating: 99%

Steel construction with either black enamel or chrome finish. 90^o or straight mounting options. Keeper included.

Springs - Air - Convolute Bellows

Search Rating: 96%

Spring Assemblies - Small Bracket - RINO

Search Rating: 96%

Spring: Stainless Steel 301 S21 Grade. Base: Aluminium Drum: High Impact Styrine. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring.

Spring Motor Assemblies - Open - RINO

Search Rating: 96%

Also see combined categories:
All Spring Motors

Budget Assemblies. Average fatigue life of 5000 to 30000 cycles.

Springs : 301 Stainless Steel. Average fatigue life of 5,000 to 30,000 cycles.

Springs - Compression - Conical

Search Rating: 96%

Also see combined categories:
All Conical Springs

Conical 302 Stainless steel springs

Solid height lower than a standard compression spring due to the conical shape. Ends are closed. Starting rate is the same as the kg/mm rate.

Springs - Compression - Long Lengths - Music Wire

Search Rating: 96%

Also see combined categories:
All Compression Springs

1 metre and 914mm lengths

Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.

Springs - Compression - Long Lengths - Stainless Steel

Search Rating: 96%

Also see combined categories:
All Compression Springs

1 metre and half metre lengths

Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.

Springs - Compression - Standard - Stainless Steel

Search Rating: 96%

Also see combined categories:
All Compression Springs

Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote.

Springs - Compression - Standard - Steel

Search Rating: 96%

Also see combined categories:
All Compression Springs

Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote.

Springs - Drawbar - Stainless Steel

Search Rating: 96%

Also see combined categories:
All Drawbar Springs

Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.

This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring.

Springs - Drawbar - Zinc Plated

Search Rating: 96%

Also see combined categories:
All Drawbar Springs

Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.

This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring.

Springs - Die - Imperial - Extra Heavy Duty

Search Rating: 96%

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded green. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 25 percent of the length.

Springs - Die - Imperial - Heavy Duty

Search Rating: 96%

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length.

Springs - Die - Imperial - Heavy Duty - Chrome Silicon

Search Rating: 96%

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded gold. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 30 percent of the length.

Springs - Die - Imperial - Medium Duty

Search Rating: 96%

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded blue. Efficient operating range is 25 to 40 percent of the length. Maximum deflection is 50 percent of the length.

Springs - Die - Imperial - Medium Duty - Chrome Silicon

Search Rating: 96%

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded blue. Efficient operating range is 25 to 35 percent of the length. Maximum deflection is 50 percent of the length.

Springs - Die - Imperial - Medium-Heavy Duty

Search Rating: 96%

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded red. Efficient operating range is 20 to 30 percent of the length. Maximum deflection is 37 percent of the length.

Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon

Search Rating: 96%

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded red. Efficient operating range is 20 to 25 percent of the length. Maximum deflection is 37 percent of the length.

Springs - Die - Metric - Extra Heavy Duty

Search Rating: 96%

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded yellow

High tensile strength chromium alloy steels. Heat Resistance: Up to +230^oC (Loss of load occurs above +120^oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Springs - Die - Metric - Heavy Duty

Search Rating: 96%

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded red

High tensile strength chromium alloy steels. Heat Resistance: Up to +230^oC (Loss of load occurs above +120^oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Springs - Die - Metric - Light Duty

Search Rating: 96%

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded green

High tensile strength chromium alloy steels. Heat Resistance: Up to +230^oC (Loss of load occurs above +120^oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Springs - Die - Metric - Medium Duty

Search Rating: 96%

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded blue

High tensile strength chromium alloy steels. Heat Resistance: Up to +230^oC (Loss of load occurs above +120^oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Springs - Extension - Music Wire

Search Rating: 96%

Also see combined categories:
All Extension Springs

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 ^oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 ^oC (500 Deg F). 302 stainless steel is slightly magnetic.

Springs - Extension - Stainless Steel

Search Rating: 96%

Also see combined categories:
All Extension Springs

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 ^oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 ^oC (500 Deg F). 302 stainless steel is slightly magnetic.

Springs - Torsion - Left Hand Wound

Search Rating: 96%

Also see combined categories:
All Torsion Springs

Free Deflection denotes the angle of the legs in the unloaded starting position

Load should be applied at about half the leg length.

Springs - Torsion - Right Hand Wound

Search Rating: 96%

Also see combined categories:
All Torsion Springs

Free Deflection denotes the angle of the legs in the unloaded starting position

Load should be applied at about half the leg length.

Snaps - Spring - Interlocking - Style 1

Search Rating: 95%

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.

Snaps - Spring - Interlocking - Style 2

Search Rating: 95%

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.

Snaps - Spring - Interlocking - Style 3

Search Rating: 95%

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.

Latches - Spring - Knob Style

Search Rating: 95%

Smooth latching action. Camming action of spring pawl provides wide grip ranges. Black nylon with stainless steel spring. Hosuing is bright chromate zinc alloy plated steel with sealer. Designed to be riveted or screwed in place.

Plungers - Spring - Acetal Handle - Locking - Stainless

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

White acetal plastic handle . 303 stainless steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Acetal Handle - Locking - Steel

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Black acetal plastic handle . Black oxide coated steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Acetal Handle - Non Locking - Stainless

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

White acetal plastic handle . 303 stainless steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Acetal Handle - Non Locking - Steel

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Black acetal plastic handle . Black oxide coated steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Hex Drive Handle - Locking - Steel

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Knurled Handle - Locking - Stainless

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Knurled Handle - Locking - Stainless-Acetal

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Knurled Handle - Locking - Stainless-Phenolic

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Knurled Handle - Locking - Steel

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Knurled Handle - Locking - Steel-Acetal

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Knurled Handle - Locking - Steel-Phenolic

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Knurled Handle - Non Locking - Stainless

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Knurled Handle - Non Locking - Steel

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - L Handle - Locking - Stainless

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - L Handle - Locking - Stainless-Acetal

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - L Handle - Locking - Stainless-Phenolic

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - L Handle - Locking - Steel

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - L Handle - Locking - Steel-Acetal

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body and acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - L Handle - Locking - Steel-Phenolic

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - L Handle - Non Locking - Steel

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Pull Ring - Locking - Stainless-Acetal

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Pull Ring - Locking - Steel-Acetal

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Pull Ring - Non Locking - Stainless-Acetal

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Pull Ring - Non Locking - Steel-Acetal

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Push Fit - Stainless

Search Rating: 95%

Also see combined categories:
All Push Fit Spring Plungers

300 series stainless with 17-7 stainless spring

Plungers - Spring - Push Fit - Stainless-Acetal

Search Rating: 95%

Also see combined categories:
All Push Fit Spring Plungers

Stainless body with acetal nose

Plungers - Spring - Push Fit - Steel

Search Rating: 95%

Also see combined categories:
All Push Fit Spring Plungers

Steel body and steel nose

Plungers - Spring - Ring Handle - Locking - Stainless

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Ring Handle - Locking - Stainless-Phenolic

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Ring Handle - Locking - Steel

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Ring Handle - Locking - Steel-Phenolic

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Ring Handle - Non Locking - Stainless

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Ring Handle - Non Locking - Stainless-Phenolic

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Ring Handle - Non Locking - Steel

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Ring Handle - Non Locking - Steel-Phenolic

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Tee Handle - Locking - Stainless

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Tee Handle - Locking - Steel

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Threaded Adapter - Locking - Stainless

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Threaded Adapter - Locking - Steel

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Threaded Adapter - Non Locking - Stainless

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Threaded Adapter - Non Locking - Steel

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Threaded - Stainless

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers

303 Stainless Steel.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Threaded - Stainless-Acetal

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers

303 Stainless Steel body and acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Threaded - Stainless and Plastic

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers

303 Stainless Steel.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Threaded - Steel

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Threaded - Steel-Acetal

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers

Acetal nose with steel body

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Threaded - Steel-Acetal - Hex Nose

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers

Steel body and acetal hex nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Threaded - Steel and Plastic

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers

Plastic nose with steel body

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Threaded - Steel - Hex Nose

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers

Steel body and steel hex nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers

Over 10 million cycles. Built to take the tough abuse of high speed, long run, stamping operations. Ideal for use as parts lifters in dies, or other applications requiring exceptional long life.

Special long life springs. Black oxide finished bodies. Nylon locking element. Not recommended for use in aluminium applications.

Plungers - Spring - Threaded - Steel - Long Stroke

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers

With Long-Lok thread locking compound to prevent loosening

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Threaded - Steel - Threadlock

Search Rating: 95%

Also see combined categories:
All Threaded Spring Plungers

With Long-Lok thread locking compound to prevent loosening

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Stops - Spring - Flat Button

Search Rating: 95%

Also see combined categories:
All Spring Stops

Spring stops are used extensively in the locating of parts in jigs and fixtures, particularly where fixture walls are not available. Plunger is case hardened low carbon steel. Properly radiused nose for perfect fit with no wobble. Aluminium body.

Stops - Spring - Flat Face

Search Rating: 95%

Also see combined categories:
All Spring Stops

Spring stops are used extensively in the locating of parts in jigs and fixtures, particularly where fixture walls are not available. Plunger is case hardened low carbon steel. Properly radiused nose for perfect fit with no wobble. Aluminium body.

Stops - Spring - Flat Face - With Tang

Search Rating: 95%

Also see combined categories:
All Spring Stops

Spring stops are used extensively in the locating of parts in jigs and fixtures, particularly where fixture walls are not available. Plunger is case hardened low carbon steel. Properly radiused nose for perfect fit with no wobble. Aluminium body.

Tang prevents thin gauge material from sliding under plunger.

Stops - Spring - Round Acetal Nose

Search Rating: 95%

Also see combined categories:
All Spring Stops

Spring stops are used extensively in the locating of parts in jigs and fixtures, particularly where fixture walls are not available. Plunger is hardened and ground smooth. Properly radiused nose for perfect fit with no wobble. Aluminium body.

Stops - Spring - Round Steel Nose

Search Rating: 95%

Also see combined categories:
All Spring Stops

Spring stops are used extensively in the locating of parts in jigs and fixtures, particularly where fixture walls are not available. Plunger is hardened and ground smooth. Properly radiused nose for perfect fit with no wobble. Aluminium body.

Washers - Spring - 2 Wave Type

Search Rating: 95%

Also see combined categories:
All Wave Washers

Wave Washers - All Materials.

Washers - Spring - 3 Wave Type - 302 Stainless Steel

Search Rating: 95%

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave.

Washers - Spring - 3 Wave Type - 400 Grade Stainless

Search Rating: 95%

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave.

Washers - Spring - 3 Wave Type - Berryllium Copper

Search Rating: 95%

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave.

Washers - Spring - 3 Wave Type - Carbon Steel

Search Rating: 95%

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave.

Washers - Spring - Curved - Carbon Steel

Search Rating: 95%

Also see combined categories:
All Wave Washers

Wave Washers - All Materials.

ID and OD are long axis dimensions.

Washers - Spring - Curved - Stainless Steel

Search Rating: 95%

Also see combined categories:
All Wave Washers

Wave Washers - All Materials.

ID and OD are long axis dimensions.

Strip - Spring Steel

Search Rating: 95%

Also see combined categories:
All Metal Strip

Hundreds of uses.

Hardened and tempered spring steel strip. Note that the width of this strip may vary minus nothing to plus 25 percent as it is guillotine cut from sheet. If you require a closer tolerance on the strip width please contact us prior to ordering.