Rod Ends Stainless Steel Categories


Category Matches

Rod Ends Stainless Steel

TopHide Pictures



Engineering and Hobby Rod

TopHide Pictures

Rod - Round - Stainless Steel
Rod - Round - Stainless Steel

Search Rating: 71%

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:

Allthread

TopHide Pictures

Threaded Rod - Allthread - Stainless Steel - 304
Threaded Rod - Allthread - Stainless Steel - 304

Search Rating: 69%

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - 303 and 304 grades. Also known as booker rod.


Threaded Rod - Allthread - Stainless Steel - 316
Threaded Rod - Allthread - Stainless Steel - 316

Search Rating: 69%

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - 316 grade. Also known as booker rod.


Keys and Keysteel

TopHide Pictures

Keys - Machine - Stainless Steel
Keys - Machine - Stainless Steel

Search Rating: 68%

Also see combined categories:
All Machine Keys

Form A has rounded ends. Form B has square ends. Form AB has one end rounded and one end square. DIN6884


Pins Pull

TopHide Pictures

Pins - Pull - Threaded End - Stainless Steel
Pins - Pull - Threaded End - Stainless Steel

Search Rating: 68%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg.


Spring Anchors

TopHide Pictures

Anchors - Spring - Stainless Steel
Anchors - Spring - Stainless Steel

Search Rating: 68%

Also see combined categories:
All Spring Anchors

An economical way to secure the ends of extension springs, and provide easy adjustment.

300 Grade Stainless Steel.


Linear Bearings

TopHide Pictures

Bearings - Linear - Ball - Stainless Steel - Closed
Bearings - Linear - Ball - Stainless Steel - Closed

Search Rating: 68%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:

Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - Threaded End - Stainless Steel
Pins - Ball Lock - Threaded End - Stainless Steel

Search Rating: 68%

Also see combined categories:
All Ball Lock Pins with Threaded End

One end threaded so you can attach your own handle or knob. Also called detent pins.


Springs Compression

TopHide Pictures

Springs - Compression - Standard - Stainless Steel
Springs - Compression - Standard - Stainless Steel

Search Rating: 67%

Also see combined categories:
All Compression Springs

Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote.

Related Information:

Springs - Drawbar - Stainless Steel
Springs - Drawbar - Stainless Steel

Search Rating: 67%

Also see combined categories:
All Drawbar Springs

Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.

This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring.


Gears Inch Spur

TopHide Pictures

Gears - Spur - 48DP - Differential End - Stainless
Gears - Spur -  48DP - Differential End - Stainless

Search Rating: 65%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

To suit the precision diffs listed on this site. 303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 64DP - Differential End - Stainless
Gears - Spur -  64DP - Differential End - Stainless

Search Rating: 65%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

To suit the precision diffs listed on this site. 303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 72DP - Differential End - Stainless
Gears - Spur -  72DP - Differential End - Stainless

Search Rating: 65%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

To suit the precision diffs listed on this site. 303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 96DP - Differential End - Stainless
Gears - Spur -  96DP - Differential End - Stainless

Search Rating: 65%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

To suit the precision diffs listed on this site. 303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 96 Diametrical Pitch. Approx 0.83mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Springs Compression

TopHide Pictures

Springs - Compression - Conical
Springs - Compression - Conical

Search Rating: 65%

Also see combined categories:
All Conical Springs

Conical 302 Stainless steel springs

Solid height lower than a standard compression spring due to the conical shape. Ends are closed. Starting rate is the same as the kg/mm rate.

Related Information:

Cable

TopHide Pictures

Attachments - Thimbles - Stainless Steel
Attachments - Thimbles - Stainless Steel

Search Rating: 65%

316 Stainless Steel. Use with synchromesh cable or standard miniature cable. Use with synchromesh or standard miniature cable

Thimbles provide loop support at higher loads and protect cables from wear when motion is present. Some thimbles may have open or uneven ends.

Related Information:

Springs Constant Force

TopHide Pictures

Springs - Constant Force
Springs - Constant Force

Search Rating: 65%

301 Stainless Steel

Mounting hole specifications will be supplied on request. These springs are usually mounted on a drum and the free end attached to a loading force like a counterbalance. Free ID may vary to meet load specification. Load capacity can be increased by using multiple strips in tandem, back to back or laminated. Be sure to leave at least 40mm coiled on the drum at full extension. The spring ID will wrap tightly on the drum so that most applications require no fastening to the drum.

Related Information:

Shaftloc

TopHide Pictures

Shaftloc-tm Sleeves - Single Ended
Shaftloc-tm Sleeves - Single Ended

Search Rating: 65%

Also see combined categories:
All Shaftloc

Simple effective way to lock components onto shafts.

416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.

Related Information:

Latches Adjustable

TopHide Pictures

Latches - Adjustable Draw - With Hook - Stainless
Latches - Adjustable Draw - With Hook - Stainless

Search Rating: 64%

Threaded rod allows periodic adjustments where gasketing and material tolerances may vary. Passivated 300 Grade Stainless Steel.


Latches - Adjustable Draw - With Keeper - Stainless
Latches - Adjustable Draw - With Keeper - Stainless

Search Rating: 64%

Threaded rod allows periodic adjustments where gasketing and material tolerances may vary. Passivated 300 Grade Stainless Steel.


Spring Motors

TopHide Pictures

Spring Motors - RINO
Spring Motors - RINO

Search Rating: 64%

Also see combined categories:
All Spring Motors

301 stainless Steel. Shipped as shown to be mounted on drums (not supplied) of the recommended diameters. Torque ratings listed are for the unwinding portion of the cycle. Torque at fully wound end of cycle will be slightly higher.


Bearings 316 Stainless

TopHide Pictures

Bearings - Ball - 316 Stainless Steel - Double Row - Open
Bearings - Ball - 316 Stainless Steel - Double Row - Open

Search Rating: 63%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:

Bearings - Ball - 316 Stainless Steel - Single Row - Open
Bearings - Ball - 316 Stainless Steel - Single Row - Open

Search Rating: 63%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:

Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed

Search Rating: 61%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded

Search Rating: 61%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

Bar and Rod

TopHide Pictures

Hexagonal Bar - 303 Stainless
Hexagonal Bar - 303 Stainless

Search Rating: 60%

Also see combined categories:
All Metal Bar - Hexagonal

Corrosion resistant 303 grade stainless.

Saw Cut Ends. Small A/F sizes may not be perfectly straight.


Clamping Rings

TopHide Pictures

Spiral Rings - Internal - Light Duty
Spiral Rings - Internal - Light Duty

Search Rating: 60%

Also see combined categories:
All Internal Spiral Rings

Includes series CI / VH / UR - Spring Steel and Stainless Steel.

Light duty rings for use in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CI, Smalley: VH, Spirolox and Ramsey: UR.


Splined Shafts and Bushes

TopHide Pictures

Splined Shafts - Stainless Steel
Splined Shafts - Stainless Steel

Search Rating: 59%

Also see combined categories:
All Splined Shafts

Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Related Information:

Eyebolts

TopHide Pictures

Bolts - Eye - Bent - Stainless Steel
Bolts - Eye - Bent - Stainless Steel

Search Rating: 59%

Also see combined categories:
All Eye Bolts

Not recommended for lifting. 304 stainless steel.

Complete with nut. Rolled threads.


Tube and Tubing

TopHide Pictures

Tube - Round - Stainless Steel
Tube - Round - Stainless Steel

Search Rating: 58%

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:

Shafting Precision Ground

TopHide Pictures

Shafting - Pre Drilled and Tapped - Stainless Steel Steel
Shafting - Pre Drilled and Tapped - Stainless Steel Steel

Search Rating: 57%

Also see combined categories:
All Shafting
All Stainless Shafting

For use with rail supports and open linear bearings


Bushes Steel

TopHide Pictures

Bushes - Stainless Steel and PTFE - Flanged
Bushes - Stainless Steel and PTFE - Flanged

Search Rating: 57%

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Oil, acid, alkali and salt water resistant. Contains no lead. Particularly suited to food applications, flow meters and pumps in pharmaceutical applications, printing machines chemical engineering and seawater applications.

Operating Temperature -200o to 280o Celsuis. PTFE with oilfibre 0.01 to around 0.03mm. Porous bronze 0.2 to around 0.3mm. Stainless steel backing 0.7 to around 2.3mm. 140 N/mm2 dynamic load rating. 250 N/mm2 static. 60 N/mm2 Oscillating.

Related Information:

Bushes - Stainless Steel and PTFE - Unflanged
Bushes - Stainless Steel and PTFE - Unflanged

Search Rating: 57%

Also see combined categories:
All Steel Bushes
All Unflanged Steel Bushes

Oil, acid, alkali and salt water resistant. Contains no lead. Particularly suited to food applications, flow meters and pumps in pharmaceutical applications, printing machines chemical engineering and seawater applications.

Operating Temperature -200o to 280o Celsuis. PTFE with oilfibre 0.01 to around 0.03mm. Porous bronze 0.2 to around 0.3mm. Stainless steel backing 0.7 to around 2.3mm. 140 N/mm2 dynamic load rating. 250 N/mm2 static. 60 N/mm2 Oscillating.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Bushes - Stainless Steel and PTFE - Unflanged.

Collars

TopHide Pictures

Collars - Shaft - Hinged - Stainless Steel
Collars - Shaft - Hinged - Stainless Steel

Search Rating: 57%

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:

Collars - Shaft - Standard - Stainless Steel
Collars - Shaft - Standard - Stainless Steel

Search Rating: 57%

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Includes miniature precision types. 303 and 316 Types.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:

Tooling Balls

TopHide Pictures

Balls - Checking - Stainless Steel
Balls - Checking - Stainless Steel

Search Rating: 57%

Also see combined categories:
All Fixture and Checking Balls

440C Hardened to RC 55-58.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.


Balls - Fixture - Stainless Steel
Balls - Fixture - Stainless Steel

Search Rating: 57%

Also see combined categories:
All Fixture and Checking Balls

440C Hardened to RC 55-58.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.


Balls - Checking - Stainless Steel - With Tapped Shank
Balls - Checking - Stainless Steel - With Tapped Shank

Search Rating: 57%

Also see combined categories:
All Fixture and Checking Balls

440C Hardened to RC 55-58.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.


Allthread

TopHide Pictures

Studs - Full Thread - Stainless Steel
Studs - Full Thread - Stainless Steel

Search Rating: 57%

Also see combined categories:
All Studs

18-8 Stainless Steel Allthread Threaded Bar

Short lengths of threaded 18-8 stainless steel bar.


Clips

TopHide Pictures

Snap Rings - External - Stainless Steel
Snap Rings - External - Stainless Steel

Search Rating: 57%

Also see combined categories:
All External Snaprings

Snaprings are similar to a circlip without the lugs

301 S11/S22 Stainless Steel. Used on the outside diameter of a bearing, shaft or similar equipment.


Springs Extension

TopHide Pictures

Springs - Extension - Stainless Steel
Springs - Extension - Stainless Steel

Search Rating: 57%

Also see combined categories:
All Extension Springs

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic.

Related Information:

Balls Metallic

TopHide Pictures

Balls - Stainless Steel - 304 Grade
Balls - Stainless Steel - 304 Grade

Search Rating: 57%

Also see combined categories:
All Metallic Balls

A2 Grade. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs.

Tolerances available on request. Grade 100. Non annealed. Hardness: Rockwell C: 25-39. Specific Gravity: 7.916. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs. Note! Increase in magnetic permeability may occur due to the grinding process and can be relieved by heating to over 1000 oC.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Balls - Stainless Steel - 304 Grade.

Balls - Stainless Steel - 316 Grade
Balls - Stainless Steel - 316 Grade

Search Rating: 57%

Also see combined categories:
All Metallic Balls

A4 Grade. Very low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities.

Tolerances available on request. Grade 100. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972. Low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities. Note! Increase in magnetic permeability may occur due to the grinding process and can be releived by heating to over 1000 oC.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Balls - Stainless Steel - 316 Grade.

Balls - Stainless Steel - 316L Grade
Balls - Stainless Steel - 316L Grade

Search Rating: 57%

Also see combined categories:
All Metallic Balls

Easier to machine than standard 316 grade.

316L Stainless Steel has the same properties as 316, except that it has a lower carbon content. It is also easier to machine. Non-magnetic. Resistant to severe corrosive conditions. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972.

Related Information:

Balls - Stainless Steel - 440C Grade
Balls - Stainless Steel - 440C Grade

Search Rating: 57%

Also see combined categories:
All Metallic Balls

Hardness: Rockwell C: 55-60.

Tolerances available on request. AISI440C Stainless Steel. Hardness: Rockwell C: 55-60.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Balls - Stainless Steel - 440C Grade.

Hooks

TopHide Pictures

U Bolts Stainless Steel
U Bolts Stainless Steel

Search Rating: 57%

304 Stainless steel with nuts included


Strip

TopHide Pictures

Strip - Stainless Steel
Strip - Stainless Steel

Search Rating: 57%

Also see combined categories:
All Metal Strip

430 Grade stainless steel strip


Collars

TopHide Pictures

Collars - Shaft - Gripfast - 304 Stainless Steel
Collars - Shaft - Gripfast - 304 Stainless Steel

Search Rating: 56%

Also see combined categories:
All Round Bore Shaft Collars

Self Locking - Quick Release.

304 Stainless Body, Retention Ring, Balls and Springs.

Related Information:

Spacers

TopHide Pictures

Spacers - Round - Through Bore - Stainless Steel
Spacers - Round - Through Bore - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Shaft spacers - Stainless Steel


Linear Bearings

TopHide Pictures

Bearings - Linear - Sliding - Stainless - PTFE - Closed
Bearings - Linear - Sliding - Stainless - PTFE - Closed

Search Rating: 56%

Also see combined categories:
All Sliding Linear Bearings

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.


Bearings - Linear - Sliding - Stainless - PTFE - Open
Bearings - Linear - Sliding - Stainless - PTFE - Open

Search Rating: 56%

Also see combined categories:
All Sliding Linear Bearings

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.


Collars

TopHide Pictures

Collars - Threaded - Clamp Type - Stainless Steel
Collars - Threaded - Clamp Type - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Threaded Shaft Collars

Offer full radial holding power without marring the shaft.


Washers Aligning

TopHide Pictures

Washers - Self Aligning - Sets - Stainless Steel
Washers - Self Aligning - Sets - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers

AISI 303 Stainless Steel. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.


Linear Slides

TopHide Pictures

Slides - Linear - Non Recirculating Ball - Standard
Slides - Linear - Non Recirculating Ball - Standard

Search Rating: 56%

Also see combined categories:
All Linear Slides

The BSP precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.

Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100oC (Constant), +120oC (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants.


Hobby Shafting

TopHide Pictures

Shafting - Ground - Hobby - Steel
Shafting - Ground - Hobby - Steel

Search Rating: 56%

Also see combined categories:
All Shafting
All Steel Shafting

Silversteel shafting for hobbies. Not suitable for precision bearings.

Suitable for use with plastic gears, bushes, couplings etc. Not recommended for use with precision steel or stainless steel bearings. Some sizes have special features such as serrations or small barbs (noted in description). Unground ends. Ideal for axles in robotic applications and educational projects.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Shafting - Ground - Hobby - Steel.

Bearings for Housings

TopHide Pictures

Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings
Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings

Search Rating: 56%

Insert bearings ideal for wet conditions. Similar to standard wide inner ring bearings for P, F, Fl type housings.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:

Clamping Rings

TopHide Pictures

Rings - Split - Stainless Steel
Rings - Split - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Split Rings

316 stainless steel wire rings.


Nuts Dome

TopHide Pictures

Nuts - Cap - Stainless Steel
Nuts - Cap - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Nuts

Stainless Steel. Lower profile than a dome nut.


Nuts - Dome - Stainless Steel
Nuts - Dome - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Nuts

Stainless Steel.


Nuts Hex

TopHide Pictures

Nuts - Hexagonal - Stainless Steel
Nuts - Hexagonal - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Nuts

UNC - UNF - BA - METRIC - BSW - Course - Fine - Extra Fine.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Nuts Wing

TopHide Pictures

Nuts - Wing - Stainless Steel
Nuts - Wing - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Nuts
All Wing Nuts

304 and 316 Stainless Wing Nuts - A Pattern B18.17

Related Information:

Pins Clevis

TopHide Pictures

Pins - Clevis - Stainless Steel 304
Pins - Clevis - Stainless Steel 304

Search Rating: 56%

Also see combined categories:
All Clevis Pins

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

Related Information:

Pins - Clevis - Stainless Steel 316
Pins - Clevis - Stainless Steel 316

Search Rating: 56%

Also see combined categories:
All Clevis Pins

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

Related Information:

Pins Cotter

TopHide Pictures

Pins - Split - Stainless Steel
Pins - Split - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Split Pins

Split pins.

Related Information:

Pins General

TopHide Pictures

Pins - Clik - Stainless Steel 316 Grade
Pins - Clik - Stainless Steel 316 Grade

Search Rating: 56%

Also see combined categories:
All Clik Lynch Pins

Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.

Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.


Pins Roll

TopHide Pictures

Pins - Coiled - Stainless Steel - Heavy Duty
Pins - Coiled - Stainless Steel - Heavy Duty

Search Rating: 56%

Also see combined categories:
All Coiled Pins

Spirol Pins. Coiled roll pin.


Pins - Coiled - Stainless Steel - Standard Duty
Pins - Coiled - Stainless Steel - Standard Duty

Search Rating: 56%

Also see combined categories:
All Coiled Pins

Spirol Pins. Coiled roll pin.


Pins - Roll - Stainless Steel - 300 Grade
Pins - Roll - Stainless Steel - 300 Grade

Search Rating: 56%

Also see combined categories:
All Roll Pins

304 grade DIN1481.


Pins - Roll - Stainless Steel - 420 Grade
Pins - Roll - Stainless Steel - 420 Grade

Search Rating: 56%

Also see combined categories:
All Roll Pins

420 grade DIN1481.


Washers Aligning

TopHide Pictures

Washers - Self Aligning - Components - Stainless Steel
Washers - Self Aligning - Components - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers. Washer A (aligning) and washer B (seat) sold separately.

AISI 303 Stainless Steel. Order a base washer and an aligning washer to make a complete unit. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.


Washers Finishing

TopHide Pictures

Washers - Cup - Stainless Steel
Washers - Cup - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Cup Washers

For countersunk screws.

Stainless Steel cup washers.


Washers Flat Metallic

TopHide Pictures

Washers - Flat - Stainless Steel 304 - Commercial
Washers - Flat - Stainless Steel 304 - Commercial

Search Rating: 56%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.


Washers - Flat - Stainless Steel 316 - Commercial
Washers - Flat - Stainless Steel 316 - Commercial

Search Rating: 56%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.


Washers - Flat - Stainless Steel - Precision Shim
Washers - Flat - Stainless Steel - Precision Shim

Search Rating: 56%

Also see combined categories:
All Precision Shim Washers
All Flat Washers and Spacers - Metallic

Precision Tolerances.

Related Information:

Hooks

TopHide Pictures

Hooks - S - Stainless Steel
Hooks - S - Stainless Steel

Search Rating: 56%

Also see combined categories:
All S Hooks

304 stainless steel

Any deviations such as angular lifts, shock loads, modifications will result in drastically reduced maximum loads.


Lifting Chain

TopHide Pictures

Chain - Sash - Stainless Steel
Chain - Sash - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Link Chain

Flat metal chain operates smoother over pulleys. Ideal for lighting fixtures etc. Not for lifting.


Bearings Thrust

TopHide Pictures

Bearings - Thrust - Ball - Flat - Stainless Steel
Bearings - Thrust - Ball - Flat - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

Bearings - Thrust - Ball - Grooved - Stainless Steel
Bearings - Thrust - Ball - Grooved - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

Linear Slides

TopHide Pictures

Slides - Linear - Recirculating Ball - Standard
Slides - Linear - Recirculating Ball - Standard

Search Rating: 56%

Also see combined categories:
All Linear Slides

The BSR precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.

Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100oC (Constant), +120oC (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants. Note BSR1530SL and BSR2040SL can not be mounted from inside of track rail.


Locking Bushings

TopHide Pictures

Bushings - Integral Taper
Bushings - Integral Taper

Search Rating: 56%

Also see combined categories:
All Locking Assemblies
All Locking Bushings

Stainless Steel Taper Bushings.

Will not mar shafts.


Screws Grub (Socket Set)

TopHide Pictures

Socket Set Screws - Brass Tipped - Stainless Steel
Socket Set Screws - Brass Tipped - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Brass tipped grub screws. Helps to prevent shaft damage on harder shafts.

Related Information:

Socket Set Screws - Acetal Tipped - Stainless Steel
Socket Set Screws - Acetal Tipped - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Acetal tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.

Related Information:

Bearings Special Purpose

TopHide Pictures

Bearings - Ball - 304 Stainless Steel
Bearings - Ball - 304 Stainless Steel

Search Rating: 56%

Also see combined categories:
All 300 Grade Stainless Bearings

Corrosion and Heat resistance - Non Magnetic - Unhardened.

Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.05 / -0 mm , OD +0 / -0.03 mm, Width +0/- 0.12 mm. Low load, low speed applications requiring maximum corrosion resistance. Non Magnetic. Cages, balls, races and shields from AISI 304 Stainless Steel.

Related Information:

Circlips

TopHide Pictures

Circlips - External - Standard - Stainless Steel
Circlips - External - Standard - Stainless Steel

Search Rating: 56%

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / N1400 / D1460. 420 Stainless Steel. Retaining rings. Snap Rings (USA).

420 Stainless Steel.

Related Information:

Circlips - Internal - Standard - Stainless Steel
Circlips - Internal - Standard - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / N1300 / Seeger J and JS. 420 Stainless Steel. Retaining rings. Snap Rings (USA).

420 Stainless Steel. Tolerances on request. Standard and heavy duty options.

Related Information:

E-Clips - Basic - Stainless Steel
E-Clips - Basic - Stainless Steel

Search Rating: 56%

Also see combined categories:
All E-Clips

Basic imperial and metric e-clips DIN6799 and N1500. Stainless Steel PH15-7.

Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip.

Related Information:

Clips

TopHide Pictures

R Clips - Single Coil - Stainless Steel
R Clips - Single Coil - Stainless Steel

Search Rating: 56%

Also see combined categories:
All R Clips

Also known as internal hitch pins, bridge pins or humpback pins


Snap Rings - Internal - Stainless Steel
Snap Rings - Internal - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Internal Snaprings

Internal snaprings are similar to an internal circlip without the lugs

301 S11/S22 Stainless Steel. Used on the inside bore diameter of a housing or similar.


Shim

TopHide Pictures

Shim and Foil - Stainless Steel
Shim and Foil - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Shim
All Sheet

Precision stainless shim sheet. Very thin foil to thick sizes. Includes 416, 303 and 316 grades.

NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Shim and Foil - Stainless Steel.

Knobs Ball

TopHide Pictures

Knobs - Ball - Threaded - Stainless Steel
Knobs - Ball - Threaded - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Female Threaded Ball Knobs

303 stainless steel (European grade 1.4305)


Latches Other

TopHide Pictures

Strikes - Toggle Latch - Stainless Steel
Strikes - Toggle Latch - Stainless Steel

Search Rating: 56%

Used with toggle latches series 800, 802, 803 and 806


Nuts Hex

TopHide Pictures

Nuts - Hexagonal - Half - Stainless Steel
Nuts - Hexagonal - Half - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Nuts

UNC - UNF - METRIC

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Nuts Lock

TopHide Pictures

Nuts - Hexagonal - Binx - Stainless Steel 304
Nuts - Hexagonal - Binx - Stainless Steel 304

Search Rating: 56%

Also see combined categories:
All Lock Nuts

Manufactured from A2 302/304 grade stainless steel. The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.


Nuts Specialty

TopHide Pictures

Nuts - Flanged - Serrated - Stainless Steel
Nuts - Flanged - Serrated - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Nuts

Stainless Steel.


Pins Taper

TopHide Pictures

Pins - Taper - Metric - Stainless Steel
Pins - Taper - Metric - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Taper Pins - Metric
All All Taper Pins

Metric Sizes Tapered 1:50

Metric Sizes to DIN 1.

Related Information:

Springs Disc

TopHide Pictures

Washers - Disc Spring - Stainless Steel
Washers - Disc Spring - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Disc Springs

Also known as belleville washers.

Manufactured under strict quality control to conform to DIN 2093.


Spring Washers

TopHide Pictures

Washers - Spring - Curved - Stainless Steel
Washers - Spring - Curved - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Wave Washers

Wave Washers - All Materials.

ID and OD are long axis dimensions.


Washers Flat Metallic

TopHide Pictures

Washers - C - 303 Stainless Steel
Washers - C - 303 Stainless Steel

Search Rating: 56%

Also see combined categories:
All C Washers

Knurled outside edge



Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 124226 products in 3079 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.